Demthios

briankstan

this is a wall sign for your office or home if you like. We all have days when we feel like our world is burning down. LOL&nbsp;Hope you Enjoy.

This is Fine Wall Sign

Random

packNsnap

You can scale as big as will fit, but DO NOT scale Z height. &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Yellow Transmission Distance: 6Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #15 (1.28mm) swap to Yellow for the rest.

Iron man melting trippy 4 color HUEFORGE print

HueForge

JKtech3D

Remixed the original cardboard spool adapter design to secure to the spool utilizing the holes using a press fit design. It is also clipless to allow for easier removal and should be appropriately sized to apply enough friction on the outer edges.Confirmed capability with Overture and Inland cardboard spools and probably other similarly designed spools.

Overture and Inland Cardboard Spool Adapter for Bambu Lab AMS

Spool Covers

Amao Chan

<div><h1>Summary</h1><div>Penguin by the AnchorHuman rarely hunted penguins directly, but slowly starved them to death. Commercial large-scale capture of krill had made penguins to face undernourishment. Businessmen capture them for the rich krill omega-3s! Krill is the basis of the Antarctic food chain, including emperor penguins, Adelie penguins, blue whales, and various albatrosses feed on krill. If there’s no krill at the south Pole, the natural ecosystem will be collapsed and penguins will be the biggest victim! The research team believes that industrial-scale capturing is one of the greatest threats to krill in Antarctic ocean. If commercial practices of krill are not stopped, the number of penguins in the near future may be reduced by 1/3.In fact, we don’t need to grab the penguins’ food because omega-3 is widely found in human daily, such as fish, nuts, seaweed, etc. Do not be deceived by the commercial interests and the gimmicks! Do not buy krill products! It's not your health that you spend money on, but poor and helplessness for the lives of the penguins.The design of this penguin has been completed for some time. When I learned about the crisis facing by the penguins, I hope people pay attention to this matter and reminded by my work! I then designed an ice floe with anchors hanging to clearly understand that the penguins have been invaded excessively by human. When you print this work and share the printed results, please remember to use your anchored ice floe to tell your friends that penguins in the Antarctic ocean are facing human damage!Thanks SpiderMaker for sponsoring the creation of this work <a href="https://www.3dspidermaker.com/" rel="nofollow">https://www.3dspidermaker.com/</a> <a href="https://www.facebook.com/groups/3dspidermaker/" rel="nofollow">https://www.facebook.com/groups/3dspidermaker/</a>Material used: SpiderMaker PLA Matt black, extinction white, orange, warm white, original leatherDesign Software: SketchUp PRINT UP+ & CR10Printing Recommendation Height: 0.2mm Support Type: None Not less than 0.75 and increase the resolution to 0.15mm when downsize printing(ps. Because the accuracy on the printer is not the same. If the assembly parts are too loose or too tight, the parts may be reduced or enlarged to offset the assembly failure caused by the printer's tolerances.)<a href="https://www.facebook.com/paperworkers" rel="nofollow">https://www.facebook.com/paperworkers</a> <a href="https://amaochan.work/work/" rel="nofollow">https://amaochan.work/work/</a>【船錨邊的企鵝】人類很少直接獵殺企鵝，但卻慢慢的將牠們餓死。商業性的大量捕撈磷蝦，讓企鵝面對食物不足的狀況。商人以磷蝦富含的omega-3為由而大量捕撈磷蝦！磷蝦是南極食物鏈的基礎，包括皇帝企鵝、阿德利企鵝、藍鯨及多種信天翁在內的生物都會以磷蝦為食。少了磷蝦的南極，自然生態體系將會崩潰，而最大的受害者就是企鵝！研究團隊認為工業規模捕撈是南極水域磷蝦的最大威脅之一，若不停止捕撈磷蝦這樣的商業行為，未來企鵝的數量可能將減少1/3。事實上我們不需要去搶企鵝的食物，因為omega-3廣泛存在於人類日常食物中，例如：魚類、堅果、海藻……等。別讓商業利益炒作出的訊息與噱頭所欺騙！別購買磷蝦的製品！你花錢買的不是自己的健康，而是可憐無助企鵝們的生命。這隻企鵝的設計完成已有一段時間，當我了解到企鵝所面臨的危機時，我期望用這作品來提醒人們注意這件事情！於是我又設計了掛著船錨的浮冰，用以明白的說出人類已經過度侵犯企鵝的領域了。當你在列印這個作品及分享列印成果時，請記得用這個掛著錨的浮冰來告訴你的朋友們，南極海域的企鵝正面臨人為的傷害！感謝 SpiderMaker 織造者 贊助本作品之創作使用材料 SpiderMaker PLA 消光黑色、消光白色、陽橙色、暖白色、原皮色設計軟體 SketchUp 列印 UP+ & CR10列印建議 層高0.2mm 免支撐 縮小列印時請別小於0.75並提提高解析度到0.15mm(ps.因列印機之列印精確度不一，若有組合零件太鬆或太緊時，可將局部零件縮小或放大以抵銷因列印機公差所造成之組裝不順。) <a href="https://www.youtube.com/watch?v=X0OFBxcySy4" rel="nofollow">https://www.youtube.com/watch?v=X0OFBxcySy4</a></div><h1>Print Settings</h1>Printer Brand: <div>Up</div> Printer: <div><a href="http://amzn.to/2BpkPM8" target="_blank" rel="nofollow noopener">Up Plus</a></div> Rafts: <div>No</div> Supports: <div>No</div><h1>Post-Printing</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=X0OFBxcySy4"><iframe src="//www.youtube.com/embed/X0OFBxcySy4" frameborder="0" allowfullscreen="allowfullscreen"></iframe></div></div>

Penguin by the Anchor

Wifie

technerd

THE ULTIMATE NOZZLE WIPER&nbsp;I print a lot of PETG with my Bambu Lab P1S and was a little disappointed with the original Nozzle Wiper it didn't cleaned well enough. That's why I came up with a simple and inexpensive solution to get a perfectly clean nozzle. All you need is a good quality silicone tube. I tested mine with a soldering iron (Weller Digital set at 250°C) and it didn't melted at all. STEP file is included in case you have a silicone tube with a different diameter.&nbsp;HINT: Someone on Facebook “Thanks Avianna!” told me she is putting a tiny bit of high smoke point oil “she is using grapeseed oil” on and around the clean nozzle. The oil does wear off after a while but you just keep a q-tip near by and a tiny bit of oil. Takes a second to apply. Lasts for days if not weeks. Makes for consistently clean prints ensures enhanced print quality with cleaner and more precise prints by repelling plastic and preventing buildup. Apply the oil at room temperature not at printing temperatures! It works like this expensive plastic repellent fluid from slice engineering. TEFLON or PTFE oil should work too. Use at your own risk. Just wanted to share this information with you guys.&nbsp;Printing:Keep it simple and print it from PETG and 15-20°C hotter than usual. PETG has very good layer adhesion and resists higher temps too. Don't print it from ASA/ABS or it will break very easily because ASA/ABS has in comparison bad layer adhesion.&nbsp;Quality Silicone Tube (200-300°C)You can find the silicone tube on amazon or if you're from germany here: <a target="_blank" href="https://schlauch24.de/Silikonschlauch-Meterware-3-mm-x-7-mm" rel="nofollow noopener">https://schlauch24.de/Silikonschlauch-Meterware-3-mm-x-7-mm</a>It is also available on aliexpress here: <a target="_blank" href="https://de.aliexpress.com/item/32608855966.html" rel="nofollow noopener">https://de.aliexpress.com/item/32608855966.html</a>&nbsp;Outer diameter = 7mmInner diameter = 3mmCut to exact length = 19mm (this length is barely touching the silicone sock from the nozzle)Cut approx. 3mm deep into the cross section, offset by 90 degrees&nbsp;Installation:Push the silicone tube down until it touches the adapter. Re-use the screw from the original wiper. I also made a thicker segment on the pin to prevent the tube from slipping off. I have also strategically positioned the pin so that the nozzle passes right through the center cleaning the nozzle perfectly. Happy printing!&nbsp;&nbsp;SILICONE TUBE CUTTING JIGI also made a simple cutting jig to easily get the correct length and cross section cuts, here: <a target="_blank" href="https://makerworld.com/en/models/95952" rel="nofollow noopener">https://makerworld.com/en/models/95952</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/765231/2023-12-16_63723a4e1d179.jpg"></figure>&nbsp;Here is a short Youtube video showing how it works:<figure class="media"><div data-oembed-url="https://youtu.be/rk-14syxViI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rk-14syxViI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;

Ultimate Nozzle Wiper Bambu Lab X1 P1 P1S

X1 Mods/Parts

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Random

HueForge

Spool Covers

Wifie

X1 Mods/Parts

Toys