Defender3D

NhatVP

<h4>Summary</h4>Kitchen sponge dryer. I made this project for myself but maybe someone else will also find it useful.&nbsp;Hi guys, lately i have some comment about the Sponge dry box that printing overhangs without support didn&#39;t work. I really apologize for my mistake, I should have been paying more attention. Hope you guys will still like and use my design in the future.&nbsp;So i suggest the update print setting, ****Update printing SettingPrint Settings<ul><li>Printer brand: Kingroon </li><li>Printer: Kingroon KP3S</li><li>Supports: No ( if you are using different printer with mine, you should using support, tree support will using less fillament)</li><li>Resolution: 0.1 or 0.2 (0,28 Resolution is fine but will show on the front slope)</li><li>Infill: 10-20%</li></ul>&nbsp;&nbsp;

Sponge Dryer Box

Kitchen

glen.waelbers

This is a stand for an airbrush (specifically designed for Fengda FE-130K)A stand like this can be very helpfull to fill up the paintcup, cleaning the airbrush or just for storing it.&nbsp;Please leave a comment if it also works for other airbrushes ;)

Airbrush stand

Air Brush

Sakul

🔨Mjolnir Fridge Magnets🔨 Useful and quick to print fridge magnets in Mjolnir design. Perfect for hanging up your favorite snapshots and memories. A 4x2mm magnet, which can be purchased in the BambuLab Store, is glued into the back and you&#39;re ready to go. But are you worthy?<figure class="image image_resized" style="width: 48.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474902/design/2024-05-25_1c0a3c47a99b6.gif"></figure>

Mjolnir Fridge Magnet

Fridge Magnet

bambaxp

There are three different sizes based on the diameter of the rod handle, to be printed preferably in PETG

Safe fishing hook

Fishing

diego_roca

This is model highly inspired on the kick starter Revov Traybox, this version has a removable lid instead of a rotational one so no other parts are needed. The Lid needs non tree supports to be printed since its edges are hanging. Update: new lid model without dividers

EDC Organizer Traybox

Bedroom Organization

Majogram

Disclaimer: This is NOT a real gun, but simply a prop replica.&nbsp;Scale 1:4

Prop Kriss Vector

Williams Industries

There are two profiles, the first one being the coaster. Second profile is for wall art/display&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>Patreon includes commercial use on all prints.

Thwomp Coaster and Wall Art

Wall Art

Because3D

These are cable organizer clips to hold together CAT6 ethernet cables. These clips have been designed to work with Monoprice Cat6 250ft White CMR UL Bulk Cable, Solid (w/spine), UTP, 23AWG, 550MHz, Pure Bare Copper.&nbsp;When designing, I focused on ensuring:<ul><li>A tight fit to ensure it will hold the cable securely, while not being too tight to damage the outside cable jacket.</li><li>The clip is thick/strong enough to not break.</li></ul>This design may work with other CAT6 cables, but fitment is not guaranteed. According to Monoprice, the particular cable these clips were designed for has an outside diameter (OD) of 6.3 mm.<h3>Parts Included in Print</h3>Parts include clips to hold quantities of Ethernet cables in 1-row and 2-row configurations. A copy of each configuration below is included in the default print profile. Parts can be deleted/cloned as needed.<ul><li>2 cable (1 row)</li><li>3 cable (1 row)</li><li>4 cable (1 row)</li><li>5 cable (1 row)</li><li>6 cable (1 row)</li><li>7 cable (1 row)</li><li>8 cable (1 row)</li><li>2 cable (2 rows)</li><li>4 cable (2 rows)</li><li>6 cable (2 rows)</li><li>8 cable (2 rows)</li><li>10 cable (2 rows)</li><li>12 cable (2 rows)</li><li>14 cable (2 rows)</li><li>16 cable (2 rows)</li></ul>

Ethernet Cable Clips

Wire Origination

PecaCZ

Dragonfly 2D Art Wall Decoration

FallenAngel

Mug to hold typical beer cans ( The slot is ~70mm in diameter). Mug's Height is ~150mm &nbsp;Note: requires Support at few areas.

Mug - Dragon Version 

Mugs

angrelou

For this Halloween, you can have your Alexa in an incredible spider costume that allows you to change its eyes' color to red or black without the need for glue (they fit in with little pressure). This amazing print doesn't require supports to look like in the picture. (if you want to add supports, you can still do it, but it´s not 100% neccessary)After hours of designing, it finally ready. Enjoy Halloween and the 3D print!

Spider Alexa Echo Dot 4th / 5th Gen

Echo Dot

Papalumpi

Hi!&nbsp;Here is a simple notice sign for video surveillance.&nbsp;The sign is 250x250x3mm in size.There are 2 holes for mounting with a diameter of 5mm.Ideal for suction cups, or to use it with my “Table Stand for Signs”. Thickness is 2,8mm.&nbsp;Enjoy printin.g !!!&nbsp;&nbsp;Here is the link to the suction cups I purchased.<a target="_blank" href="https://amzn.eu/d/0obhFor" rel="nofollow noopener">https://amzn.eu/d/0obhFor</a>&nbsp;Let me know if you find any mistakes or if I should create a different sign ..."&nbsp;If you need any further assistance or adjustments, feel free to ask!&nbsp;&nbsp;

24 Hour Video Surveillance Sign

Signs

schwaighoferart

Dieses Bauteil wurde speziell für den Pit Droid von Droid Division entworfen. Es handelt sich um ein passgenaues Inlay, das es ermöglicht, einen LED-Ring mit WS2812B 12-Bit 50mm und eine LED-Ring-Lampe 5050, die mit einem Arduino kompatibel sind, einzubauen. Eine Bohrung für das einfache Verlegen aller Kabel wurde ebenfalls integriert.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QPZR0UuC7fw&amp;t=4008s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QPZR0UuC7fw?start=4008" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Das hochgeladene Modell namens &#34;Pit-Droid-eye-new&#34; ist eine von Michael Rieks konstruierte Datei für den 3D-Druck. Ich habe die ausdrückliche Erlaubnis diese Datei hier online zu stellen. Im beigefügten Video ist der einfache Einbau der fertigen Druckdatei gut zu erkennen.&nbsp;Die verwendeten LED-Ringe finden Sie unter diesem Link<a target="_blank" href="https://shorturl.at/yBR89" rel="nofollow noopener">https://shorturl.at/yBR89</a><a target="_blank" href="https://shorturl.at/lAHR7" rel="nofollow noopener">https://shorturl.at/lAHR7</a>&nbsp;This component has been specifically designed for the Pit Droid by Droid Division. It is a precision inlay that allows for the installation of an LED ring with WS2812B 12-bit 50mm and a 5050 LED ring lamp that are compatible with an Arduino. A borehole for easy cable routing has also been integrated.The uploaded model, named &#34;Pit-Droid-eye-new,&#34; is a file for 3D printing designed by Michael Rieks. I have explicit permission to post this file online here. The attached video clearly demonstrates the easy installation of the finished print file.&nbsp;

Pit Droid Auge für LED WS2812

Star Wars

Marek Adamczyk @ 3D

<h2>Fidget Counter Toy</h2>So, I wanted to create my own Fidget Toy… not just another dummy button, but a proper working mechanism. I went through multiple prototypes and designs to end up with the Fidget Counter. It is really clicky and snappy and addictive… You can use the pusher/button or just play with the gear - it goes in one direction only. Assembly is easy, just follow the instruction. I hope you will like it! <figure class="image image_resized" style="width: 68.33%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452668/design/2024-05-03_e484d7e8dd6ab.gif"></figure>&nbsp;<h3>Mods</h3>NEW Skeleton Cover Mod - <a target="_blank" href="https://makerworld.com/en/models/456500" rel="nofollow noopener">https://makerworld.com/en/models/456500</a> Skeletonized version of the top cover allowing you to see the inner mechanism.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452668/design/2024-05-11_2c7719930789f.jpg"></figure>NEW Keyring Mod - <a target="_blank" href="https://makerworld.com/en/models/460815" rel="nofollow noopener">https://makerworld.com/en/models/460815</a>Keyring hook you can print in any color you like and attach to the main body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452668/design/2024-05-11_92d369feb78e4.jpg"></figure><h3>Printing Notes:</h3><ul><li>Please make sure your filament is dry! Wet PLA is becoming very brittle and may cause the tension springs to break quickly. During my tests with dry filaments, I have not experienced any broken spring so far, however, please consider PLA is not the best material for such use and may break anyway after extensive use. Main Tension Spring is designed in a way it can be printed separately and quickly replaced if necessary.</li><li>If you are experiencing corner lifting problem when printing the case, use the profile with brim.</li><li>For both springs I suggest avoiding Matte PLAs or any other filament with additives since those tends to deform much more than a Basic PLA which works well and is springy enough. PETG or ABS should work even better for this purpose.</li><li>I have tested this model extensively with standard 0.4 Nozzle and 0.08mm Layer Height using Bambu Lab and Polymaker PLAs.</li></ul><h3>Assembly Guide</h3>Install the parts in order described:<ol><li>First put Gear Tension Spring [1, violet] - Make sure it is properly aligned with the post. It is press fit so with just a little push it will slide into its place.</li><li>Then goes Big Gear [2, orange] - Be careful with the spring you placed; you will need to pry it a bit to place the gear. It should fit the axis just a little loose, so you can spin it freely but just in one direction. It is supposed to click.</li><li>Next Small Gear [3, green] - Same as big one it will fit axis with some play and both gears should now work together but again just in one direction.</li><li>Then fit Pusher Tension Spring [4, blue] - It should slide in nicely with not much force required.</li><li>Lastly install Pusher Button [5, yellow] - Fit it into place so its bottom will seat on the tension spring and the arm will fit the small gear. Now you can test the whole mechanism even without the top cover.</li><li>Finally, if everything works, you can close the cover. Line it up (watch out for the pusher since it may be pushed by the tension spring to side) and with a little force it will snap.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452668/design/2024-05-03_e91024dc13196.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452668/design/2024-05-03_113e949fb0dfc.png"></figure><h3>Changelog</h3><ul><li>07/05/2024 - Skeleton Cover Mod released.</li><li>10/05/2024 - Designer Profile split into version with and without brim.</li><li>11/05/2024 - Tolerance for Small Spring increased by 0.1mm to allow easier mounting/demounting.</li></ul>

Fidget Counter Clicky and Snappy Toy Assembly Kit

Fidget

Flowers3d

Fascetta Zip/cable tie , ottimo se usato con materiali flessibili tipo Nylon o petg&nbsp;

Fascetta riutilizzabile

Zip Tie

memfis01

This is a simple Bambu Lab filament swatch sheet holder based on the Swatch Display Board from Bambu Lab It doesn&#39;t really need any support for printing, I added that just in case.Enjoy :)

Filament swatches sheet holder

Filament

河马先生

2024.5.31   1.对两侧的支架活动结构继续做了优化。                     2.风扇前后盖增加了螺丝孔位，使其同时支持25和38规格的风扇，风扇规格切换只需更换两侧支架即可。                     3.多处细节修改                                         未解决问题：角度调节的齿轮结构会出现磨损&nbsp;                     风扇安装位设计尺寸是121mm×121mm×25.6mm（38.6mm），如遇安装困难，请考虑风扇尺寸及材料收缩。&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455363/design/2024-05-31_e9686d231a825.png">                    &nbsp;&nbsp;2024.5.19   耗材建议用PETG，因为大部分螺丝没用螺母，纯靠螺丝拧入材料中进行咬合，所以螺丝孔位设计的均是2mm，有朋友反应PLA打印后拧花好了好多螺丝，PLA我基本没用过，应该是PLA硬度高的原因吧。                                        不敢保证模型非常完美，花大洋找人代打慎重！慎重！&nbsp;2024.5.13  16:05-------1.新增支持12038风扇的支架。                                      2.改善原模型支架十字插销易断的问题，且不用再使用支撑。                                      3.新增可对接排气风管的滤芯盖（手头没有风管，尺寸未验证，用过的朋友麻烦告知一下，感谢！） 成品我只打印了3个，期待用过的朋友给与反馈问题及修改建议，我会第一时间对模型进行修改。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455363/design/2024-05-13_782ef9dec3412.jpg"></figure>2024.5.13  12:24 ------大家先暂停打印，两边的支架有缺陷，梅花瓣有断裂的可能，解决方案已经完成，我正在多尺寸测试，找到合适的参数后会第一时间更新，到时候会将12038规格的支架一起上传。&nbsp;2024.5.6----模型暂时只支持120mm×120mm×25mm风扇，滤芯为直径120mm×厚26mm，如有这个作品您喜欢我后期会出38mm风扇及其他风扇型号。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455363/design/2024-05-13_62af155f7c08e.jpg"></figure>

多功能桌面风扇支架

BigOleWallace

Here is a Switch Pro mount for a 2014-2021 Toyota Tundra. It goes in the overhead console with no modification to major parts. I have a regular template and one that uses a O-Light O-Bulb Pro as extra map lights. It fit checks great! X1C for the WIN!!!&nbsp;Regular Mount Notes: I used wire cutters to get the SOS button out of the way and used Double Sided tape to attach it to the plastic as shown and it will be unusable. I wont ever use it anyway(this is the only thing in the way of my SR5 model so if you have more buttons I don't think it would work properly). Also you will have to cut a groove for the SP-9100 wire(not shown). &nbsp;O-Bulb Mount Notes: The same as above plus buy a 18mmx3mm Neo Magnet and glue in recessed portion.&nbsp;Any questions just send me a message and feedback will be great!

SP9100 14-21 Toyota Tundra Overhead Mount

Toyota Tundra

One Maker Show

<h2>Knowledge is everything 📚</h2><h4>Fully Editable Filament Swatches</h4>In my opinion, to judge a filament color with a not tridimensional Sample, I need to see it under different light, touch it, and play with it.<h2>THE MODEL</h2>Primitive Voron Cube for me is the best sample ever, but if you like it you can print a Bambu Cube instead, or any other cube with the same dimension.To add a Bambu Cube, right-click on Plate → Primitive → Bambu Cube<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450383/design/2024-05-01_647737f864e6c8.jpg"></figure>&nbsp;<h2>Label</h2>Customize Labels Text of Font it&#39;s easy like Sunday morning.Remember text in Bambu Studio is not optimal maybe with some name or font You need to make some adjustments.&nbsp;&nbsp;Customize Labels Text it&#39;s easy like Sunday morning.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450383/design/2024-05-01_62af7b1733436.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450383/design/2024-05-01_75f91d5f1a5968.jpg"></figure>&nbsp;<h2>BOARD</h2>If You Like you can have your own Wall Board.Profile “Pistambrilli” Gives you the Perfect Pin.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450383/design/2024-05-01_c403002acbb1f8.jpg"></figure>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/450388" rel="nofollow noopener">HERE</a> You can find mine Infill Swatches</h2><a target="_blank" href="https://makerworld.com/en/models/450388" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450383/design/2024-05-01_4b14c0185beda.jpg"></a>&nbsp;__________________________________________________________________________<h3>Hey, If you like my <a target="_blank" href="https://makerworld.com/en/@OneMakerShow" rel="nofollow noopener">Stuff</a> Maybe You also like my <a target="_blank" href="https://www.instagram.com/mattia.confalonieri/" rel="nofollow noopener">SHOW</a></h3>

Tridimensional Filament Swatches

Slicer

3dcreat3d

smiley keychain.PRO TIP: looking good in every color

smileys keychain

Soren de loose

This is the 2,6g Plant Tag...

plant tag

Garden

Codyinbody3

Here&#39;s another custom lamp I had a friend reach out and ask me to make. I thought I&#39;d upload it for you all to print as well. Enjoy!&nbsp;Settings: The print profile settings are setup specifically for the frontplate only so you won&#39;t have wisps or colors bleed into each other or have those random dots of a darker color that you can only see when you get a light behind it. These are the best settings I&#39;ve found to take care of that out of the 1000s of lamps I&#39;ve printed. When going to print the backplate, be sure to change the filament settings. You&#39;ll want to change the first layer and other layers temps back to 220 on both. Then you can choose to take off retraction and zhop but it won&#39;t mess with the quality either way.

Ghostbusters LED Lamp

Office

pierolanda

espositore girevole per pezzi stampati in 3d&nbsp;* Motore elettrico 12Volt DC con riduttore  * 5 Cuscinetti (608ZZ) * 8 perni a testa svasata M3 * Resistenza variabile (B 1 K) * 1 Interruttore Deviatore a 3 posizioni

turning table

Tools

MacDaddy509

Printed the Headphone Stand Gamer Hair - Beard Skull Nº1 (https://makerworld.com/en/models/195526#profileId-216146) for hanging my headphones but I don&#39;t exactly have free real estate on my desk so I set out to make a wall mount for the skull and figured, might as well double down with the bearded skull theme. the arm gets 2 ruthex RX-M3x5.7 threaded inserts and I used 2 m3 screws to mount it to the wall plate.

Wall Mount for Gamer Hair - Beard Skull Nº1

Skull

Informalmarc

Mini tripod, comes in 3 leg heights (85, 100, 120mm). Rotate ring to adjust height/leg spreadRequires: 3 - M3 16mm socket head screw 1 - ¼ ½ inch boltOptional: Foam sheet to improve grip when handheld or reduce slipping, use cutting guidePrinted with PETG at 0.15/4 walls/30% infill, clear holes before assembly Note: gaps at the leg hinge points are at 0.1mm, to prevent/reduce walls getting stuck calibrate your flow settings, I set mine to 95%

Adjustable Mini Tripod

Cellphone Holder

Surin Ondro

Double troubleCable clip for two 4mm wide cables.No need to enable supports for this print.If you need you can add brim for better adhesion.&nbsp;enjoy :-)

DoubleTrouble cable clip

Wire Holder

Special Printing Services

Nuka cola container inspired by the one from Fallout series.It could be used as a container for geocaching and actually for anything else. The inner container is made of two parts connected by a thread. The whole thing is attached to the bayonet inside the bottle. The bayonet is with a &#34;click&#34; feature ... a place where you have to overcome resistance to lock it. It clicks and it won&#39;t release on its own. It is designed for 3Dprinting, so you dont have to use supports for any part.Bottle cap and Nuka Cola sticker are printed with double color feature. There is a pause added in print profile (no AMS profile), so you can change the filament color manually. To secure bottle cap and “Nuka Cola” sticker use some glue. You have to bend the “Nuka Cola” sticker over the edge of the table to achieve the correct arch shape before sticking to bottle. Not for commercial use. Ask me for a permission.

Fallout Nuka Cola geocache container 

Fall Out

uni3Dworld

High density model of Roots HandsFormat STL and OBJCreated in blenderMaterial PLA2 perimeters15 % infillNo supports

Roots Hands Vase

Planter

DerRoesti

I had a tough time figuring out what is what for the Original Profil and you still had to look up and gather other Models.I took the origninal Profile and created Print profiles for the entire Costume.Now you have the Full armor, Blaster and Jetpack nicely sorted and easy to Print. All Parts are here for People who want to print a Full Cosplay I am 1,90 around 100kg. Resizing may be needed!&nbsp;Sources:Shinguard by <a target="_blank" href="https://www.thingiverse.com/TonyBlokeDesigns" rel="nofollow noopener">TonyBlokeDesigns</a>    <a target="_blank" href="https://www.thingiverse.com/thing:4050910/files" rel="nofollow noopener">https://www.thingiverse.com/thing:4050910/files</a>Darksaber by <a target="_blank" href="https://www.thingiverse.com/yeetkus" rel="nofollow noopener">yeetkus</a>         <a target="_blank" href="https://www.thingiverse.com/thing:4754462" rel="nofollow noopener">https://www.thingiverse.com/thing:4754462</a>Most of the Armor by <a target="_blank" href="https://www.thingiverse.com/moesizzlac" rel="nofollow noopener">moesizzlac</a>  <a target="_blank" href="https://www.thingiverse.com/thing:4074037" rel="nofollow noopener">https://www.thingiverse.com/thing:4074037</a>Blaster by <a target="_blank" href="https://makerworld.com/en/@emp3thy" rel="nofollow noopener">emp3thy</a>  <a target="_blank" href="https://makerworld.com/en/models/34089#profileId-32572" rel="nofollow noopener">https://makerworld.com/en/models/34089#profileId-32572</a>Shinguard Flares by <a target="_blank" href="https://www.thingiverse.com/bh1138" rel="nofollow noopener">bh1138</a> <a target="_blank" href="https://www.thingiverse.com/thing:3579756/files" rel="nofollow noopener">https://www.thingiverse.com/thing:3579756/files</a>Left Arm Armor and Handguards by <a target="_blank" href="https://www.thingiverse.com/dromanol" rel="nofollow noopener">dromanol</a>  https://www.thingiverse.com/thing:4037828

Mandalorian Full Cosplay (sorted+easy) - Remix!

Mandalorian

DR3D Maker

ITAModello di case militare facile da stampare e veloce da assemblare&nbsp;Modello 1: con inserti filettati M3x5.7 Ruthex (Amazon) per plasticaModello 2: con sole viti e dadi&nbsp;materiale richiestoModello1:n°8 viti M3x10 n°6 viti M3x30 n°14 inserti filettati M3x5.7 Ruthex (Amazon) per plastica&nbsp;Modello 2:n°8 viti M3x12 n°6 viti M3x30n°14 dadi bassi M3&nbsp;INGMilitary case model easy to print and quick to assemble&nbsp;Model 1: with M3x5.7 Ruthex (Amazon) thread inserts for plasticModel 2: with screws and nuts only&nbsp;required materialModel1:n°8 M3x10 screws n°6 M3x30 screws n°14 M3x5.7 Ruthex (Amazon) threaded inserts for plastic&nbsp;Model 2:n°8 M3x12 screws n°6 M3x30 screwsn°14 M3 low nuts