DeclanD_

Markury

It's very cute (and easy to knock over, so be careful) Prints fine without supports, uses AMS for color changes, although it is possible to print without an AMS. You'll just get a white layer instead of solid black on the edges. Feel free to make your own profiles, mine is just the standard using Arachne for the wall generator.Happy printing

doodlebob pen holder

Misc

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Plants

Celestin

You&#39;re tired of seeing your desk cluttered with 3D printing debris or various waste!&nbsp;The solution is here: a trash can that attaches directly to your desk. Simply slide it on, and your waste will now be confined to one place.&nbsp;It&#39;s as simple as that: you print it and screw it onto your desk. It can be adapted to desks up to 3.5 cm thick. I&#39;ve added a piece of TPU to ensure better grip under constraint.&nbsp;I made 2 versions of my trash can, one large which you can see in the photos with a height of 160 mm, and another smaller one with a height of 115 mm, for those with less filament and who want to print faster. (The assembly remains the same.)&nbsp;And there you have it, problem solved! With its large capacity, you won&#39;t need to empty it every day; it can hold a lot for a long time.&nbsp;IMPORTANT NOTE: There may be a slight lack of grip for the trash can to hold well. To remedy this, you can apply a bit of hot glue on the top of the trash can that is in contact with the table.  After several tries, I found that the best solution was to put the trash can under constraint with the TPU. To do this, you screw the trash can normally to the table, then you remove it and tighten it a bit more. This way, when you put the trash can back in place, it will be well secured and will hardly move at all. Good impression!

Desk trash bin

Desk/Workbench

TrocheHole

<figure class="table" style="width: 100%"><table style="background-color: #f5f5f5; border: 12px solid #f5f5f5"><tbody><tr><td><figure class="image image-style-side"><a href="https://makerworld.com/models/459303" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-05-10_145eb9783fdb7.jpg"></a></figure><h3>[Information]</h3>The LID model designed specifically for the basket has also been released for this &#34;Purge Chute &amp; Basket&#34; model.<h3><a target="_blank" href="https://makerworld.com/models/459303" rel="nofollow noopener">Visit this link to download.</a></h3></td></tr></tbody></table></figure>&nbsp;<h2>Description</h2>The magnetic Chute &amp; detachable Basket for the poop purged from the X1C, P1S, and P1P.Both the Chute and Basket are easily detachable, but they are also securely attached to prevent accidental movement.The use of the Fixture (the light gray part in the photo) is strongly recommended, as it is very effective in preventing the Chute from shifting.Please also check the photos and print profile for additional information.&nbsp;&nbsp;<figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg"></a></figure><figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg"></a></figure>──────────<h2>Update</h2><h4>[ June 14, 2024 ]</h4><ol><li>“Fixture2”, which allows stable installation of the Chute without magnets, has been added. (*It can also be used with magnets.)</li><li>As requested, the “Extra-Short” size basket has been added.  </li></ol><h4>[ April 7, 2024 ]</h4>New sizes have been added to the basket model.<ul><li>Short</li><li>Medium (*original size)</li><li>Long</li><li>Wide</li></ul>──────────&nbsp;<h2>Printing Tips</h2>No supports are needed. But, the overhang angles of the Chute and Basket are 30 degrees.If you are using a filament that is NOT good at printing overhangs, please enable support settings yourself.&nbsp;<h2>Compatible Magnet Types (for the Chute)</h2><ul><li>DIA 13mm x T 2.5mm</li><li>DIA 12mm x T 3mm</li><li>DIA 12mm x T 2mm</li><li>DIA 10mm x T 3mm</li><li>DIA 10mm x T 2mm</li><li>DIA 8mm x T 3mm</li><li>DIA 8mm x T 2mm</li><li>DIA 6mm x T 3mm</li><li>DIA 6mm x T 2mm</li><li>No Magnets</li></ul>&nbsp;

Misc

Plants

Desk/Workbench

Printer Stuff