Search models, users, collections, and posts
Bio
I enjoy making fun and useful designs. I'm learning Fusion 360 CAD so I can modify existing designs to suit my needs, and create new designs from scratch. I'm also having a lot of fun learning 3D sculpting using Nomad Sculpt on my iPad.
I been running my first Bambu Lab X1-Carbon Combo with the new AMS2 Pro since March 2025. I am having fun learning the specifics of Bambu printing. I previously ran an Ender-3 Max Neo with a direct drive on Klipper.
I appreciate every like, boost, and follow very much! Thanks
Achievements
MakerWorld Guardian
This badge has expired
They printed out smoothly. They fit well in the little holder and they’re extremely useful. I’ve already printed extras and I know I’ll be printing more in the future.
Share
0
0
0
Printed beautifully and seems to work well so far. I feel like the bottom could be just a bit larger for the cup to sit in, but it does work as is.
Share
0
0
0
They printed fairly well, but one of the four balls became detached. I had to skip that part, and the rest finished fine after that but they did have some defects from the failed print. I will try printing these again since my cats like them.
Share
0
0
0
The print came out wonderfully. The lines are quite thin, so it was a little challenging to cut up pieces of adhesive strips to put on the back. But it was doable and it worked out without them being visible. I really like how it looks on the wall. My wife loves it, I made it for her.
Share
0
0
0
Printed very well. Just waiting for my magnets to arrive so I can attach them. The hotends fit well and it looks really nice and neat. Thanks for the great design!
Share
0
0
0
The cube printed perfectly using generic silk PLA. It’s really cool looking and it’s really fun to play with. Now I want to try printing some in gradient filament or multicolor filament and on a more fun build plate.
Share
0
0
0
This printed very nicely in PETG. I just used my filament settings. My cat started playing with it as soon as I was done cleaning the support surface. Kalili says thank you for the design!
Share
0
0
0
I printed this in generic TPU. It came out beautifully and my cats like to play with it. I’ll probably end up printing a few more in different colors.
Share
0
0
0
This printed very cleanly apart from the smiley face on the underside. I will try printing that with supports next time. It didn’t come out terribly, but it is pretty stringy. This was with generic PLA.
Share
0
0
0
Share
0
0
0
Share
0
0
0
I printed this with a generic transparent PLA and it came out flawlessly. it’s a great fit to the printer and the design is very clean and thought out well. Thanks!
Share
0
0
0
Printed in Ludicrous mode using PETG. Nice covers to keep my curious cats away from the belts.
Share
0
0
0
These fit perfectly and were easy to install. Thanks for the useful design!
Share
0
0
0
The caps printed beautifully and are a perfect fit. I printed them out of PETG on the textured plate.
Share
0
0
0
These printed great using generic PETG. They look stringy in the picture, but that’s just the trapped air between the lines made visible by the transparent PETG. Thanks for making the design! I’ve been using these for a couple years and they work great for me.
Share
0
0
0
This printed BEAUTIFULLY I used a generic tri color silk filament that wasn’t completely dried, so I got a tiny bit of stringing. Not the fault of the profile at all. I printed the version with the brims. Not sure that I needed to. There were no adhesion issues at all on a clean textured PEI plate. No glue needed on the plate. All joints were free moving immediately aside from the jaw and shoulders, but those popped free easily. I highy recommend this model and profile!
Share
0
0
0
The only change I made was to make the top layer use hilbert curve just for a different look. It is a little hard to snap the arm free the first time, but it works very smoothly after that.
Share
0
0
0
Share
0
0
0
No more data