DarkEnergyLab

不咲的熊

3D printed Raspberry pi desktop tower caseedit: also uploaded .step files to customize to your own likingScrews used are:Sidepanel: Philips pan head selftapping screw M3x8 Pi to case: Philips pan head M2.5x6

Raspberry Pi 4/5 Desktop tower Case 

Raspberry Pi

FlorinV

I know there are other racks and holders for paints, but I wanted something a bit different, more flexible and still simple to print, without using more filament than needed.<ul><li>Minimal footprint and filament use, but still very strong. For 28 bottles version with 26mm bottle size: estimated print time 7.6h and 248gr filament.</li><li>Good visibility of bottles and also good grip. (not easy to flip them over)</li><li>Fusion 360 file included, designed to easy change the bottle size and number of columns. (just change 2 parameters; please check the print screens bellow for more info)</li><li>Available profiles and tested for Vallejo bottles: 17ml and 60ml. The hole sizes are: 26mm and 36.8mm. Each profile contains several models with different number of columns. (e.g. 1, 3, 5, 7) Each column has 4 rows.</li><li>Simple to print, without any supports. If you generate other sizes using the fusion file, please arrange the model on the plate similar to how I did it in my profiles. (upside down, as this is how I designed the model and the most efficient way to print them without issues)</li><li>There is no special design to attach different models between them, but you can easily glue them together. So, you can add from time to time another set of columns, as you need them or even glue together different bottle size columns. </li></ul>How to change the bottle size and number of columns, if you need something different than already available in my profiles:<ul><li>open the file in fusion 360 and go to: Modify → Change Parameters (as shown bellow)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000237584/design/2024-03-08_e9416dcfadd5c.png"></figure><ul><li>Change the size value and/or columns value:</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000237584/design/2024-03-08_c958e077a5969.png"></figure>

Customizable Paint Rack

Airbrush

Kondzio29

Take you GoPro on the adventure and bring a Lily Pod along!   Tripod screw base:<a target="_blank" href="https://makerworld.com/en/models/432831" rel="nofollow noopener"> HERE </a> Lily Pod is tripod inspired by nature - by Lily petals unfolding. This tripod can be assembled without additional hardware - just with a piece of filament and some glue! Only hardware needed is for the GoPro mount with simple M5 nut and bolt.  You need to print base, three legs and three hinges. Assembly as follows:<ol><li>Glue the hinges to the legs as you can see in the photo using your glue of choice (I used CA glue) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000205458/design/2024-02-25_cd612d7fb27f2.jpg"></li><li>After glue is dried place the leg in the base and thread a piece of filament through the hole in the base and the hinge.</li><li>Make sure the filament is inserted all the way.</li><li>Using side cutters vut the excess of the filament from the base.</li><li>Put a drop of glue on the filament end to secure it.</li><li>Repeat steps 2-5 for the other legs.</li><li>Insert M5 nut in the place (of the fit is too tight you can heat the nut)</li><li>Done!</li></ol>

Lily Pod - Small GoPro tripod 

GoPro

Dev_It

<figure class="image image_resized image-style-side" style="width:16.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417698/2024-01-17_144e07ce1cd93.jpg"></figure>Work tray for small projects like Arduino, assembling models, etc. Keeps your current project isolated from the rest of your desk/workbench, with a main compartment, two side compartments and a Gridfinity area for your tools and additional part storage. The tray is solid enough you can pick the whole thing up (tools parts and all) and move to a different spot. The tray is designed to use up most of the suggested build volume for a Bambu printer.&nbsp;<figure class="image image_resized image-style-side" style="width:16.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417698/2024-01-17_b91f2a06c01ec.jpg"></figure>The main compartment features a removable 14x14x2 cm work mat.You can replace it or use different materials depeneding on your needs and preferences. I included several mats in the project; two grids (one in inches the other centemeters), one with angled lines and blank mat. If you plan on swapping mats a lot I recommend using one of the ‘cut out’ versions so you have an easier time picking it up. The mats can be multi-color printed by pausing/swapping filaments starting a 1.8 mm (or layer 9 in the included profile) with or without an AMS&nbsp;The back area is a <a target="_blank" href="https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925" rel="nofollow noopener">2x6 ‘weighted’ Gridfinity baseplate</a> so you have all the usual options of adding magnets, weights etc. I'm using a combination of the <a target="_blank" href="https://makerworld.com/en/models/20670#profileId-19120" rel="nofollow noopener">Rugged Organizer</a> along with some assorted standard <a target="_blank" href="https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721" rel="nofollow noopener">Gridfinity bins</a>.&nbsp;

Work Tray for small projects with Gridfinity

Tools

NewfoundPrints

Made to be printed face down on a textured plate, giving it a nice top finish. These are designed to be used with a 2mm thick, 100mm diameter cork coaster with adhesive backing. I used these ones:<a target="_blank" href="https://www.amazon.ca/dp/B08XZ4VM36?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.ca/dp/B08XZ4VM36?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;I print these as a set of 4 and have included a holder as well. For the bottom of the holder I use these rubber stops:<a target="_blank" href="https://www.amazon.ca/dp/B093DHDM8F?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.ca/dp/B093DHDM8F?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;Both the cork and the rubber stops give the coasters a nice feel, and help to prevent any sliding around.&nbsp;Main print settings:Layer height: 0.16Infill: 40%Infill Pattern: 40% (this is to ensure a smooth backing)Infill/wall overlap: 60%&nbsp;***If using the above cork backings, please ensure to scale X & Y to 100mm ONLY. Do not scale Z***

Dodge Coaster Set

Rincewind76

This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend.The performance of the hotend of the Bambu Lab X1C/X1 is comparable to the Rapido hotend, but the price is only a fraction of the Rapido. &nbsp;So Sam Schmidt from the Voron/Bambu Facebook group designed an adapter for the Bambu hotend to be used in a V6 like manner in Stealthburner. MrTeliP improved the design and I adapted it to be more reuseable.&nbsp;The heat insert should be M3, 5mm diameter, length 3,5-4mmThe screws have to be M3x14, see pictures.

Voron Stealthburner Printhead for Bambu X1C/X1 Hotend

VORON

Hobbypunk

I created a 10 by 6 shelf. It will be mounted on a honeycomb storage wall. You have to glue it in inserts. Depending on the load of your shelf, I recommend mounting it near screws.The second print plate contains an insert for a 13mm rod.

Honeycomb storage wall shelf

TotalChaos

Made this stackable solution for all bambu bits and pieces to keep my printer space neat and tidy. Each body slots into each other making it one streamline unit. I thought I would share it with everyone because there was nothing on offer that allows you to customise the storage to your needs. Slim Draw (Requires Slim Body)insert 1 offer a wide range of storage with dedicated slots for hotends, wipers + screws, nozzle socks ect Slim Draw (Requires Slim Body)insert 2 offers a split section for odds and ends including pliers & cuttersFat Draw (Requires Fat Body) insert 1 offers a wide range of storage with dedicated slots for hotends, full assembly hotends, glue stick & scrapers ect MEGA UPDATE FOR A1 MINI OWNERS! I have released an A1 mini version of the Tidy System, you can find it using the link below: https://makerworld.com/en/models/80083#profileId-85022 UPDATE: 26/11/23  New Added Draws  1. Fat & Slim - Empty draws2. Slim Draw quad sections UPDATE: 27/11/23 ALL NEW COLOUR SAMPLE FILAMENT TIDY DRAW! <a target="_blank" href="https://makerworld.com/en/models/75661#profileId-80194" rel="nofollow noopener">https://makerworld.com/en/models/75661#profileId-80194</a> UPDATE: 28/11/23 Build Plate Module! <a target="_blank" href="https://makerworld.com/en/models/76785#profileId-81260" rel="nofollow noopener">https://makerworld.com/en/models/71878#profileId-76020</a> UPDATE: 30/11/23 Tidy System Top Caddy  <a target="_blank" href="https://makerworld.com/en/models/78869#profileId-83174" rel="nofollow noopener">https://makerworld.com/en/models/78869#profileId-83174</a> UPDATE: 30/11/23 Top Plate Added to Profile & Raw Download UPDATE: 04/12/23 Only Hotend Slim Draw Added (NOT FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD Only Complete Hotend Fat Draw Added (FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD UPDATE: 05/12/23Slim A1 Mini Accessory Draw ADDED PRINT PROFILE AND RAW DOWNLOAD  UPDATE: 11/12/23 Slim Colour Swatch Draw<a target="_blank" href="https://makerworld.com/en/models/89524#profileId-95815" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 14/12/23 Fat Max Body + Boxed Spares Draw<a target="_blank" href="https://makerworld.com/en/models/92978#profileId-99395" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 21/12/23 - NEW NEW DRAWS ADDED! Fat Max Draw Split Style 1 & 2 <a target="_blank" href="https://makerworld.com/en/models/101894#profileId-108493" rel="nofollow noopener">https://makerworld.com/en/models/101894#profileId-108493</a> <a target="_blank" href="https://makerworld.com/en/models/101902#profileId-108499" rel="nofollow noopener">https://makerworld.com/en/models/101902#profileId-108499</a> UPDATE: 25/12/23 NEW SLIM BLANK DRAW INSERTS! <a target="_blank" href="https://makerworld.com/en/models/106310#profileId-113505" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 29/12/23  FAT DRAW ALTERNATIVE WITH FULLY ASSEMBLED HOTENDS  <a target="_blank" href="https://makerworld.com/en/models/112956#profileId-121316" rel="nofollow noopener">DOWNLOAD HERE</a> TIDY SYSTEM TOP CADDY ALTERNATIVE VERSION <a target="_blank" href="https://makerworld.com/en/models/112974#profileId-121339" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 20/01/24 - NEW TIDY SYSTEM CONNECT -CONNECT MUTIPLE SYSTEMS TOGETHER! <a target="_blank" href="https://makerworld.com/en/models/148632#profileId-162200" rel="nofollow noopener">DOWNLOAD HERE</a>  More draw insert options to come!

Raspberry Pi

Airbrush

GoPro

Tools

Fun

VORON

HSW

BambuLabs X1C