Danuelll9090

FlemmingJensen

Title: Classic Office Phone Holder&nbsp;This elegant and minimalist phone holder stand is designed to complement any desk, bedside table, or stylish kitchen. It is compatible with all phone brands, including iPhone and Android, and can be used in both vertical and horizontal orientations. The holder accommodates your phone perfectly, with or without a case. I hope you enjoy it, and don&#39;t forget to give it a like!

Phone holder stand

iPhone 

Wekster

if you like this kind of stuff consider supporting me on my Patreon patreon.com/wekster

Venom

venom 

Henryb2015

I wanted to display my funko's out of the box but also wanted to keep the box with them This is what I came up with. I did make it a little larger than needed so it would fix the box with or without a protector on it. If you want it to fit your box snug, you will need to resize a small amount. I think it looks great as it is. You can see in the pictures it's not too big.

Funko out of box shelf

funko Pop 

Faran3D

<h3>Welcome to my Fallout Nuka Cola Series!</h3>This is a series of replicas of the Nuka-Cola drinks from Fallout with the classic rocket shape and fins, and logos and colors matched to the ones you find in game!&nbsp;Nuka Cola is immediately recognised for its red label with white logo and the brown refreshing beverage it contains. Nuka Cola Caps are a currency in the wasteland, so this is an integral part of any fallout fan or cosplay collection.&nbsp;Printing is absolutely straightforward - no supports or anything is needed and this is an AMS print so little to no post processing is required. I've replaced the Nuka Cola logo on the bottle with a wrapped version and decreased the amount of silver on the cap as it was messy.&nbsp;As with all AMS prints it is more economical to print several copies rather than just one, so print a few copies at the same time and use them to decorate several places or give away a few!&nbsp;Please like and rate this print, your support is appreciated!

Fallout Nuka Cola AMS Bottle and Cap

nuka Cola 

PhaseworksCA

Marvel at the iconic Iron Man with this low poly geometric 3D print, featuring the superhero standing facing boldly forward. This modern design captures his powerful stance in sharp, angular lines, perfect for fans of superheroes and contemporary art.&nbsp;Happy printing :)&nbsp;<figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599315/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

Geometric Low Poly Iron Man

low Poly 

Coortoise

This little plug is super easy to make and takes less than 10 min to print!&nbsp;Do you have an A1/Mini and don&#39;t have the AMS system? You might notice the little black nubs where the PTFE tubes connect to the hot end vibrate and make noise during pre-print. This plug will stop the vibrating and keep dust out of them!&nbsp;If you want to make sure your plug is perfectly flat, printing with a brim should work.

A1/Mini AMS Plug

Bambu A1 mini

lastwaun

Standard deck of cards (52 cards) plus two jokers. This also includes a case for the cards that needs to be folded into the box shape. The cards are plenty flexible and can eaily be shuffled and they bridge well! I found the textured PEI sheet to give a nice feel in the hands and keeps cards from sticking to eachother. I found PLA to work just fine for the cards - plenty flexible and per ususal easy to work with. The cards also shuffle extremely well and even bridge! I first tried the box as PLA but it quickly broke after too many bends of the lid so I made it out of PETG next time and so far it's held up just fine.&nbsp;The 0.2mm nozzle allowed for fine detail and thin layers. In my testing I found that having 2 layers of the color was just right - not going to peak through but also enoough to be plenty visible so I used 0.06mm layer height.I also found that slowing down the first layer and starting with black ensured good first layers.&nbsp;<a target="_blank" href="https://imgur.com/gallery/A5i34lz" rel="nofollow noopener">Here is a video</a> of the cards being shuffled.&nbsp;&nbsp;

Waterproof Playing Cards

Karten 

f.lamonica

I started from the AntonyLu model (https://www.thingiverse.com/thing:1688862)and then made the following mods:<ul><li>replaced static limbs with joint-movable ones</li><li>removed engravings from body geometry</li><li>Added a ribbon and a pompon ball to the hat</li><li>replaced hat strip with an AMS colored with “Stay Puft” text</li></ul>

Marshmallow man from ghostbusters

Ghostbusters 

RA235547

🌟 Rapid 3D printing delivers stunning unicorn figurine 🦄 Intricate details captured with precision ✨ Instantly elevate any space with magical charm ⏱️ Short production time ensures quick enjoyment 🎁 Perfect for gifting or personal indulgence

Amazing unicorn

pferde

I_Epic

This is a collapsing lightsaber model I made about two years ago and recently rediscovered buried in my Google Drive. It is designed to be printed without supports and features a screw on base to allow the blade to be printed in any color you want and replaced if broken.&nbsp;There are two lengths of blade, the regular version with five pieces or the short version made of four pieces. The first print profile comes with all required pieces, though if you want the short blade you can download the second print profile. Additionally, if you want to download the files manually, you will need one handle, one cap, and one blade, either the short or long version.&nbsp;Happy printing!

Collapsing Lightsaber (replaceable blade)

schwerter

JoshuaHaasua

Playstation 2 (PS2) Game holder for housing your gaming collection. 12 slot stand.

Playstation 2 Video Game Holder - 12 Slot

PlayStation 

Deeee2504

Found it on <a target="_blank" href="https://www.printables.com/model/671653-yoshi-multicolor-multiparts-reupload" rel="nofollow noopener">printables</a>. The Original is from <a target="_blank" href="https://www.thingiverse.com/thing:2846113" rel="nofollow noopener">Thingiverse</a>. I enlarged the model to 300%.

Yoshi from Mario games - Multi-color 300% scale

Super Mario 

Rewilo

Xbox  Controller Stand

 xbox

Eternity Labs

Update - 30/04/24 - Updated this to V2<a target="_blank" href="https://makerworld.com/en/models/451343#profileId-358370" rel="nofollow noopener"> https://makerworld.com/en/models/451343#profileId-358370</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445750/design/2024-04-30_6ead9a24a907c.jpg"></figure>&nbsp;A slimmed down version of my popular Little Trees air freshener holder.&nbsp;If you want to support me click “Boost”.&nbsp;Make sure to choose the print profile that has the “Designer” tag, I don&#39;t want random people giving terrible print profiles out - give me a boost token if you have a chance, it would really help me out to keep making models like this!&nbsp;With a moving slider and plate, you can open or close the vents to your liking, and either make a big smell or a small smell.&nbsp;This will print on 2 plates and can be used with an AMS to make 2 colours.&nbsp;I have printed some in Glow in the dark PLA and some black PLA +. I like the combination of black and green, however I have made some other colour front plates and also some different back plates.&nbsp;The print profile has been optimised for you to print easily, and turns the fans off.&nbsp;Other ways to support me, and access to Commercial Licenses:&nbsp;<a target="_blank" href="https://cults3d.com/en/users/Trickstyle/3d-models-" rel="nofollow noopener">https://cults3d.com/en/users/Trickstyle/3d-models-</a> &nbsp;MY other models are available for free on my Patreon! - Click the link and make a FREE membership to access them - Make a paid membership to sell prints of my designs&nbsp;<a target="_blank" href="https://patreon.com/Eternity3D" rel="nofollow noopener">https://patreon.com/Eternity3D</a> <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

Little Trees Air Freshener V1.2 - Slimmed down

Duft Baum 

K2_Kevin

<h2 style="text-align: center">MakerChips!</h2><h2 style="text-align: center">9 Styles for your customizing pleasure!</h2> (More “decorations” coming soon, be sure follow &amp; check back.)Everyone wants a unique Maker Chip - so play with a variety of style options and create your own!&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure>MakerChip Decorations:<ol><li>K2_MakerChip_v1-Decoration_3mm.stl - Chip Decoration</li><li>K2_MakerChip_v2-Decoration_3mm.stl - Chip Decoration</li><li>K2_MakerChip_v3-Decoration_3mm.stl  - Chip Decoration</li><li>K2_MakerChip_v4-Decoration_3mm.stl  - Chip Decoration</li><li>K2_MakerChip_v5-Decoration_3mm.stl - Chip Decoration</li><li>K2_MakerChip_v6_Decoration_Gear.stl  - Chip Decoration</li><li>K2_MakerChip_v7_Decoration_BigGear.stl - Chip Decoration</li><li>K2_MakerChip_v8_Decoration_Circles.stl - Chip Decoration</li><li>K2_MakerChip_v9_Decoration_DashedCircles.stl - Chip Decoration</li><li>Sample_MakerChip-xxxxx.3mf - Sample Bambu Studio Projects</li><li>K2_MakerChip_v6_Inside_Circle-Decoration_3mm - Optional Inside color circle option - Place in center, change color on certain chip designs.</li></ol><figure class="table" style="width: 95.89%"><table class="ck-table-resized" style="border: 2px solid hsl(0, 0%, 60%)"><colgroup><col></colgroup><tbody><tr><td>DIY Instructions:<ol><li>Open Bambu Studio</li><li>Drag/Drop the Base Circle into slicer - K2_MakerChip_v1-Back.stl.</li><li>Add the version of Chip Decoration you want to use v1 - v3.</li><li>Center the Chip decoration</li><li>Switch to Objects view (In the Process dialog box in the slicer - Photo Included)</li><li>Select objects, right click and Merge.</li><li>Slice to check your MakerChip Top and Bottom!</li></ol></td></tr></tbody></table></figure>&nbsp;Adding your own logo:<ol><li>Create your logo as SVG or STL (You can use simple online tools to convert .png to .svg),<ol><li>Logo z-height only needs to be 0.6mm to 0.8mm.</li></ol></li><li>Drop your logo into Bambu Studio.</li><li>Flip your logo so it&#39;s face down. Change your view to look from below your MakerChip.</li><li>Size your logo (Easyier to use the scale/move tools in Bambu Studio) to fit your Maker Chip. You can scale, but be sure to maintain your .8mm height.</li><li>In the Objects view, select your logo, then select the assembly (so both are selected), right click and merge/combine.</li><li>Slice to verify you completed this correctly, and Print!</li></ol>Adding your own QR Code:<ol><li>I&#39;ve had great success using: <a target="_blank" href="https://genqrcode.com/generator/stl" rel="nofollow noopener">https://genqrcode.com/generator/stl</a> to create QRCodes.</li><li>Create your QR code as STL<ol><li>Size is 26mm for most chips (you can always scale in the slicer)</li><li>QR-Code z-height only need to be 0.6mm to 0.8mm.</li></ol></li><li>Size your logo to fit your Maker Chip. You can scale, but be sure to maintain your .8mm height.</li><li>Select the chip and flip it over, then center the QR-code from below like you did with your logo.</li><li>In the Objects view, select your QR-Code, then select the assembly (so both are selected), right click and merge/combine.<ol><li>Dont forget to flip it back over once merged.</li></ol></li><li>Slice to verify you completed this correctly, and Print!</li></ol>&nbsp;IMPORTANT NOTE: If you slice and you find an object is not being displayed.  Adjust the objects order in the merged assembly. Simply drag up/down and slice to see the results.&nbsp;&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415825/design/2024-05-06_1a054b3cbdf4.png">&nbsp;

MakerChip - the new Maker coin

monopoly

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

bier

jarvizar

3d miniature of Lower Manhattan, NYC!&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Midtown Manhattan miniature: <a target="_blank" href="https://makerworld.com/en/models/495851#profileId-410081" rel="nofollow noopener">https://makerworld.com/en/models/495851</a>&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/111838#profileId-119762" rel="nofollow noopener">even larger version of Midtown Manhattan</a> including the East River &amp; Hudson River!&nbsp;<h3>Printing &amp; Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000106264/design/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

New York City Lower Manhattan 3D Miniature

Länder miniaturen

SugarPaws3D

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.25mm&nbsp;Swap Instructions: Start with Black At layer #6 (0.85mm) swap to Gray At layer #10 (1.33mm) swap to White for the rest.&nbsp;Replace with any color to customize the look! (As seen in brown photo, swapped brown for white & grey for layers 6+)Art by me! Inspired by a scene from the new “Godzilla Minus One”

Godzilla Minus One Inspired Filament Painting Hueforge

Godzilla 

Norr3d

GTA VI Keychain

Schlüssel Anhänger 

figueiredoPrint

Street Fighter-inspired LED Lamp: Illuminate Your Gamer Setup with Style!&nbsp;Transform your gaming setup, bedroom, or living room with the incredible Street Fighter-inspired LED Lamp. With dimensions of 220x100x35mm (8.66x3.94x1.38 inches), this lamp is the perfect touch to elevate the ambiance.You can also use it as wall art and with dimensions of 220x100x6mm (8.66x3.94x0.24 inches), it is the perfect touch to refine the environment.&nbsp;Equipped with an RGB WS2812B LED strip and a USB-powered controller.Easy installation: simply apply the LED strip, connect the controller, affix the cover to the box, and your lamp is ready to shine.&nbsp;Use high-quality materials to ensure the lamp's durability and stability.We recommend using top-notch PLA filament, ensuring good bed adhesion for impressive results.&nbsp;Inspired by the famous game, this lamp is an essential decor item for those passionate about the Street Fighter universe.Add a touch of nostalgia and style to your gaming space.&nbsp;Enjoy the versatility of the RGB LED strip to customize the lighting according to your mood or environment.Transform your space with vibrant colors and immersive visual effects.&nbsp;Create a unique atmosphere in your bedroom, living room, or gaming setup with this exclusive LED lamp.&nbsp;Ensure yours now and illuminate your world with the power of Street Fighter.&nbsp;Designed by Figueiredo

LED lamp with Street Fighter | Wall art

led lampen

Lov3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 5.7 PLA+ IIID Max Light Blue Transmission Distance: 2.6 PETG JAYO White Transmission Distance: 6 PLA+ Sunlu Red Transmission Distance: 3.6&nbsp;!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Light Blue At layer #9 (0.8mm) swap to White At layer #19 (1.6mm) swap to Red for the rest.

Capitan America Colored 2 (HueForge)

Art deco

3Deekes

Another “Art Deco” Hueforge : Pikachu ! I&#39;m pretty sure everyone knows someone who would be happy with a Pikachu print :) Pika Pika!&nbsp;The dimensions are 180x180 mm so it fits nicely in a square frame.&nbsp;You can print frames that are compatible with my “Art Deco” Hueforges via this link :&nbsp;<a target="_blank" href="https://makerworld.com/en/models/194571" rel="nofollow noopener">https://makerworld.com/en/models/194571</a>&nbsp;Colors Used :&nbsp;Black → Red → Yellow → White&nbsp;&nbsp;I changed the thickness of the base layer, now it&#39;s 1 mm, this creates a much stronger/durable end result.I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.&nbsp;I also removed the Prime Tower , it isn&#39;t really needed for Hueforges&nbsp;Swap Instructions (when all layers are 0.04) Start with Black At layer #28 (1.13 mm) swap to Red At layer #32 (1.28mm) swap to YellowAt layer #42 (1.68mm) swap to White for the rest. &nbsp;Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on : <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

Art Deco - Pikachu

pokemon

markus.stein

This is my Spool adapter to use Geeetech spools in the AMS lite

Geeetech AMS lite adapter

spulen Halter 

tonyst

25mm Trim removal tool for getting the plastic trim clips off cars. It has 25mm width, 5mm thickness and a 5mm straight groove gap. Prints fine in PLA and for the first one i used supports and a brim before I realised they were on. it was fine, easy to break out and not much extra waste.Around 30mins print time at normal speed.&nbsp;no assembly required, once the trim button is in the groove, rotate tool whilst pulling rather than pull and lever.

Pry Tool 25mm for removing plastic Trim in Cars vans trucks

Auto werkzeug

MetroBroomin

Can be printed together or separately in other colors can be printed without support card contains BMW keychain the BMW E30 is very realistic &nbsp;Print in place kit card , Assembly required

BMW E30 kit card

Kit card

Neggan

Popular Paw Patrol logo in a larger size of 220x190mm.Layer-by-layer colour printing. Can be printed from AMS. 6 colors used.Blue 0.00 - 1.80Silver 1.80 - 3.00Inserted a pause for filament change in slot 1 and slot 2 in AMS.Red 3.00 - 4.40Yellow 4.40 - 6.00Light Blue 6.00 - 7.40White 7.40 - 8.60&nbsp;Oblíbené logo Paw Patrol ve větší velikosti 220x190mm.Barevný tisk po vrstvách. Lze tisknout z AMS. Použito 6 barev.Modrá 0,00 - 1,80Stříbrná 1,80 - 3,00Vložena pauza pro výměnu filamentu ve slotu 1 a ve slotu 2 v AMS.Červená 3,00 - 4,40Žlutá 4,40 - 6,00Světle modrá 6,00 - 7,40Bílá 7,40 - 8,60

Paw Patrol Logo

Paw patrol

braga3dprint

Unleash the power of Dragon Ball Z with this dynamic 3D printable lightbox showcasing its iconic logo. Crafted with precision and flair, this emblematic design pays homage to the legendary anime series. Ideal for fans and collectors, this Dragon Ball Z-themed lightbox radiates energy and nostalgia, infusing any space with the spirit of adventure and martial arts prowess emblematic of the beloved series. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% to 25% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;How to print without AMS:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=RUSTGxOOS_U&t=102s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RUSTGxOOS_U?start=102" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Dragon Ball Z LightBox LED Lamp

lithophane

3D Prints This Week

Load black, dark gray, lite gray, and white into ams.&nbsp;If you don't have AMS&nbsp;Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Dark GrayAt layer #12 (1.04mm) swap to Lite GrayAt layer #18 (1.52mm) swap to White for the rest.

Wet Bandits / Home Alone / Wall Art / Sign / Multicolor 

bilder

JustBe 3D Printing

I actually do print all of the models I upload and that takes a time and filament.&nbsp;Visit my Patreon (in bio or <a target="_blank" href="http://patreon.com/JustBe3D" rel="nofollow noopener">http://patreon.com/JustBe3D</a>) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.&nbsp;Can be rescaled just remember not to change the Z axis.I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Space Gray Transmission Distance: 1.4 PLA Overture White Transmission Distance: 4 PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Green Transmission Distance: 1 PLA Overture White Transmission Distance: 4Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Space Gray At layer #17 (1.44mm) swap to White At layer #21 (1.76mm) swap to Black At layer #23 (1.92mm) swap to Green At layer #28 (2.32mm) swap to White for the rest.

Yoshi

dino

(If you shrink the size, keep “z” at 100. It will be too thin if you don't)&nbsp;Load black, dark gray, lite gray, and white into ams.&nbsp;If you don't have ams, see below.&nbsp;&nbsp;Swap Instructions:Start with BlackAt layer #11 (0.64mm) swap to Dark GrayAt layer #14 (1.04mm) swap to Lite GrayAt layer #19 (1.52mm) swap to White for the rest.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Punisher / wall art / 2d art/ Skull

punisher

3D Art

Ich habe das Spiel 4 gewinnt selbst Konstruiert in einem Harry Potter Look.Die Chips sollten mit einer 0.2er Düse gedruckt werden um ein sauberes Ergebnis zu erzielen.Die 2 Basis Platten müssen mit Hilfe der 4 Stifte zusammen geklebt werden.&nbsp;Wünsche Viel Spaß beim Drucken &nbsp;

4 IN A ROW / 4 GEWINNT Harry Potter Edition

schach

the_bearded_jedi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Overture Space Gray Transmission Distance: 2.1 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA PolyLite Yellow Transmission Distance: 11 PLA Default White Transmission Distance: 5!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Space Gray At layer #9 (0.8mm) swap to Light Gray At layer #13 (1.12mm) swap to Red At layer #18 (1.52mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.&nbsp;If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.https://www.patreon.com/sblayeredcreations

Mandalorian Hueforge

Star Wars 

acevalsl

Star Wars logo in two colors with separate bodies, to be able to modify the colors&nbsp;logo Star Wars en dos colores con cuerpos separados, para poder modificar los colores

Star Wars logo

King Kong

Mr Potato

Ornate Skull Clipper Case&nbsp;Hope you guys like my uploads! Please Like / Download / Boost to support me 🙏

Ornate Skull Clipper Case

clipper

Boss Tech Print Innovations

Original model is created BrickPrints from Thingiverse. Original link: <a target="_blank" href="https://www.thingiverse.com/thing:3536767" rel="nofollow noopener">https://www.thingiverse.com/thing:3536767</a>&nbsp;&nbsp;Introducing Halloween Lego Skeletons: the perfect fusion of spooky and playful, designed to add a bone-chilling twist to your Halloween festivities! Crafted with attention to detail, this skeletal masterpiece closely resembles a real skeleton, making it an ideal decoration or a quirky addition to your desk or wherever you find fit! &nbsp;🎉 Playful Yet Spooky: Perfect for Halloween parties or as a whimsical gift, our Lego Skeleton adds a playful touch to the spookiest night of the year. It's an excellent conversation starter and a fun way to celebrate the season.&nbsp;🎁 Great Gift Idea: Looking for a unique and entertaining gift for friends or family? This Halloween Flat Lego Skeleton is a fantastic choice, guaranteed to bring a smile to anyone's face.&nbsp;Get into the Halloween spirit with our Lego Skeletons, a blend of fright and fun that's perfect for both kids and adults. Embrace the Halloween season with this delightful, bone-chilling addition to your décor or a unique companion. Print yours today and let the spooky festivities begin!You have the option to print these in a 1 pack, 4 pack, 6 pack, and for those of you that want to give them out as gifts or simple have an army of Lego skeletons we have a 20pk to fill the plate. &nbsp;Dimensions: 41.28mm x 10.5mm x 23.2mm &nbsp;1pc (1 color: 25min print time| AMS: 1h26m hours print time)&nbsp;4pk (1 color: 1h16m min print time| AMS: 2h19m hours print time)&nbsp;6pk (1 color: 1h47m min print time| AMS: 2h55m hours print time)&nbsp;20pk (1 color: 5h34m min print time| AMS: 7h5m hours print time)&nbsp;

LEGO Halloween Skeleton Minifigure with Skull Face 

lego

fay3dlab

this is the an addon for my suspended tie fighter.. it comes with a slide in frame to the original suspended tie fighter..the addon has LED channels so you can insert led strip lights in them..&nbsp;If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light <a target="_blank" href="https://s.click.aliexpress.com/e/_oEk0hDa" rel="nofollow noopener">https://s.click.aliexpress.com/e/_oEk0hDa</a>you'll only need 50cm of the LED strip for this model..&nbsp;This one is a fairly simple print.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended tie fighter..&nbsp;&nbsp;

Suspended Tie Fighter V2 LED strips

String art

Kocyns

This keychain will make it easier for you to find the right key for your car, and at the same time, you won&#39;t have to remember your car&#39;s license plate.&nbsp;In the Bambu Studio, you can adjust both the ID tag and the country. The dimensions are 60x14mm.&nbsp;Below is the procedure on how you can edit the name and customize the size, font, and position according to your needs:&nbsp;<figure class="image image_resized" style="width:80.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/840620/2024-04-11_e6ad73d2e64eb.png"><figcaption>Go to objects and find the item &#39;text_main&#39;</figcaption></figure><figure class="image image_resized" style="width:79.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/840620/2024-04-11_a088950ea87e1.png"><figcaption>Right-click and go to Edit Text.</figcaption></figure><figure class="image image_resized" style="width:79.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/840620/2024-04-11_0775fb6cfa249.png"><figcaption>Edit the Input text according to your preferences, and you can also adjust the size, position, height, and more...</figcaption></figure><figure class="image image_resized" style="width:80.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/840620/2024-04-11_96b377779a59e.png"><figcaption>You can adjust the text_country as well. Note: the minimum printable size for the country is 3.2.</figcaption></figure>&nbsp;

Keychain EU licence plate - Customizable

rolex

PLAYERFORGE

Latest addition to my MK hueforge collection. My favorite character…. Rain!

Mortal Kombat Rain Hueforge

Mortal kombat 

ARTICAT

<ul><li>Sanji Skull Keychain 3D Model<ul><li>A detailed model for One Piece fans.</li></ul></li><li>Meticulously Crafted<ul><li>Carefully designed with precision.</li></ul></li><li>Show Your Passion<ul><li>Carry a piece of the One Piece world.</li></ul></li><li>Download Today<ul><li>Add style to your accessories</li></ul></li></ul>

Keychain Skull Sanji - One Piece

one piece

Bedlam Threadz

This is a Hueforge filament painting of the Dark Knight's psychotic nemesis, The Joker. The frame for all of my, and probably the vast majority of 200x200 prints is <a target="_blank" href="https://makerworld.com/en/models/56304#profileId-57896" rel="nofollow noopener">HERE</a>.*&nbsp;This is a simple 5 color print that can easily be done by people with or without AMS units. If you have an A1 mini or any other printer with a bed smaller than the capacity to print 200x200 you can use the slicer to scale the model in the correct profile for your multi color setup just make sure NOT TO SCALE THE Z dimension. I would recommend not scaling smaller than your largest comfortable print area or you will be compressing the same amount of detail into a smaller area and it will probably get muddy, 0.2 Nozzles may mitigate some or all of this problem depending on the model and the size it is scaled down to.*&nbsp;IMPORTANT: READ BEFORE PRINTING - SUPER IMPORTANT THIS TIME*I have uploaded three 3MF profiles. One for people with a single AMS, one for people with two AMS units, and one for people with NO AMS.*To print with 1 AMS you need to swap out AMS slot [2] (Color [2]) with Color [5] when the blue gray [Color 2] has completed and fully retracted. The black is used twice in this one so make sure don't swap that out. Once the third color starts printing just load the new spool. Note the AMS will not feed the spool like it does pre print but as long as you have fed 3-4 inches in there and the light goes on it will feed as normal when it swaps back to the last color in AMS slot [2]*To print with 2 AMS units all you need to do is load the colors in order and print.*To print with NO AMS unit you just need to do manual filaments swaps every color. The 3MF is set to pause at the correct layer heights. At each pause load the next filament color in order by following your unload/load procedure for your particular printer, then hit resume. Repeat until complete. This will be once per color over the entire painting. You have a decent amount of time between swaps, and is actually harder to mess up because it pauses unlike when using the AMS.*Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. There are some recommended speed changes in my 3MF files and a layer height modifier to print the first 0.64 mm @ 0.16 mm layer height to speed up the print as there is no blending on those layers.*Like all of my models this is strictly for personal use. The photo attached is the printed model and frame.* Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3.1 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5*Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #15 (1.28mm) swap to Ash Gray At layer #21 (1.76mm) swap to Ivory White At layer #29 (2.4mm) swap to Black At layer #31 (2.56mm) swap to Red for the rest.

The Joker - Hueforge - Filament Painting

Batman

Litolunar

<img class="image_resized" style="width: 48.22%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000461394/design/2024-05-12_96b227b7af93a.webp"> Rafael puzzle.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to Red At layer #18 (1.46mm) swap to Jade White for the rest.

Puzzle raphael

turtles

Mysstra hueforge

Venom realizado con hueforge para poder imprimir en 3D, solo necesario 3 colores&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Jayo Negro Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 6Swap Instructions: Start with Negro At layer #7 (0.64mm) swap to Gray At layer #13 (1.12mm) swap to Jade White for the rest.

Venom Spiderman  3 color Hueforge

Spiderman

Phio

Here is my version of the poop bucket for my Bambu Lab A1 I wanted it to be large enough, high enough on the side to stop projections and for it to have a side flap on the right to prevent droppings from passing under the bed, I put two places for magnets so that It remains attached to the printer&#39;s foot, and finally I added the Bambu Lab logo... because it&#39;s one of my first prints and I wanted to do multi-color. Well I hadn&#39;t received my green filament yet so I put white and I find that it looks great on gray, but you can use the color you want ;-)I printed it in a layer of 0.20 so that it would be better finished but those in a hurry can use a layer of 0.28 to print it in less than 5 hours&nbsp;&gt;&gt; Modifications of May 26, 2024 &lt;&lt; There are now 2 versions: 1 - for the A1 without accessories 2 - for the A1 with Stiffener (AMS mounted on the printer)I put each model on 1 plate, that way you will have both and you can choose the one you want.- Slight changes in dimensions, thickness reduced to 1.6 mm, this saves material and printing time, despite everything the solidity is sufficient. - Layer height 0.28 for the same reasons (you can reduce to 0.20) - I increased the angle of the side flap which had caused problems for some people, so that it prints better.  - Reduced the thickness of the logo which was sticking out a little too much. - Location for larger magnets: diameter 8, thickness 2 mm ___________________________________________Voilà ma version du seau de crottes pour ma Bambu Lab A1 Je voulais qu&#39;elle soit assez grande, assez haute sur le côté pour arrêter les projections et qu&#39;elle ai un rabat latéral à droite pour éviter que les déjections ne passent sous le lit, j&#39;ai mis deux emplacement pour des magnets pour qu&#39;elle reste attachée au pied de l&#39;imprimante, et enfin j&#39;ai ajouté le logo Bambu Lab... parce que c&#39;est un de mes premiers print et je voulais faire du multi-couleur. Bon je n&#39;avait pas encore reçu mon filament vert alors j&#39;ai mis du blanc et je trouve que sur le gris ça rend bien, mais vous mettrez ce que vous voudrez ;-)Je l&#39;ai imprimé en couche de 0.20 pour qu&#39;elle soit mieux finie, mais les plus pressés pourront utiliser une couche de 0.28 pour l&#39;imprimer en moins de 5 heures&nbsp;&gt;&gt; Modifications du 26 mai 2024 &lt;&lt; il existe maintenant 2 versions : 1 - pour la A1 sans accessoires 2 - pour la A1 avec Raidisseur (AMS monté sur l&#39;imprimante)J&#39;ai mis chaque modèle sur 1 plateau, comme ça vous aurez les deux et vous choisirez celui que vous souhaitez.- Légères modifications des dimensions, épaisseur réduite à 1,6 mm ça économise de la matière et du temps d&#39;impression, malgré tout la solidité est suffisante. - Hauteur de couche 0.28 pour les mêmes raisons (vous pouvez réduire à 0.20) - j&#39;ai augmenté l&#39;angle de la bavette latérale qui avait posé problème à certaines personne, pour qu&#39;il s&#39;imprime mieux.  - Réduction de l&#39;épaisseur du logo qui dépassait un peu trop.- Emplacement pour magnets plus grands : diamètre 8 épaisseur 2 mm

Bambu A1 poop Bin

Bambu A1

AERO3D

Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purposes. So, you can use the designs for anything you need after purchasing them.Please note that reselling or uploading the STL and 3D designs is strictly prohibited.

MERCEDES COASTER

mercedes

ONI.FORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmSwap Instructions: Start with Black Matte At layer #4 (0.4mm) swap to Red At layer #8 (0.72mm) swap to Yellow At layer #14 (1.20mm) swap to White for the rest.

Son Goku SSJ Rage #02

Dragonball

Just_Josh

Deadpool 3 is coming and Wolverine is back… The merc with a mouth catches some claws to the jaw. Remember the moment with this awesome model that can also hold your headset!

Deadpool and Wolverine bust or headset holder

Marvel

Outsider

Print at 99% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used:     PLA Black      PLA  blue      PLA White This print uses 3 unique filaments<h3>Swap Instructions:     Start with Black     At layer #6 (0.8mm) swap to Blue     At layer #7 (0.92mm) swap to White for the rest.</h3>Cz:<h4>Tisk na 99% výplň s výškou vrstvy 0,12 mm se základní vrstvou 0,2 mm</h4><h4>Model má rozměry 200 x 200 mm Můžete tisknout při vyšších výškách vrstev pod minimální hloubkou 0,48 mm Maximální hloubka je 2,2 mm a skutečná hloubka je 1,5 mm</h4><h4>Použitá vlákna: PLA černá PLA modrá PLA bílá Tento tisk používá 3 jedinečná vlákna</h4><h4>Pokyny pro výměnu: Začněte s černou Ve vrstvě #6 (0,8 mm) vyměňte za modrou Ve vrstvě č. 7 (0,92 mm) vyměňte zbytek za bílou.</h4>