Danrider08

Neebick

<p>Update: I have added a <a target="_blank" href="https://makerworld.com/en/models/146363#profileId-159384" rel="nofollow noopener">scabbard</a> that is designed for this Master Sword.</p><p>&nbsp;</p><p>This one was a fun project to see if I could make a master sword that would could be all encompassing for its appearances in Tears of the Kingdom. The party trick being that the center jewel acts as a locking peg for which ever blade is inserted. It's modeled with a tight tolerance so that it will friction fit in. Just press the center of the jewel and the peg will slide out. This allows the blade to be removed. My idea was that this would be more convenient then printing and finishing 3 different hilts for each blade. Storage should be easier as well. Plus its just cool.</p><p>&nbsp;</p><p>Glue and supports will be necessary for some parts.</p><p>&nbsp;</p><p>I have kept tolerances tight on some parts to help with friction fitting. I've found the blades need a couple insertions before it becomes easier. I figured this was better then a wobbly blade.</p><p>&nbsp;</p><h3>Parts</h3><ul><li>Blades - Each blade is designed to be printed upright on the plate. You will need 2 center portions to make a full length blade. I have included pegs which should be glued to join all the sections. I suggest thick walls. I print with 5 walls for good measure. Really helps with flex. Use supports for the peg holes. On the restored blade, I did not include a tip since it is the same as the original blade.</li><li>Cross guard - I have sliced this 2 ways: Sideways for more vertical printing. Excellent cooling is a must. I had very slight sagging towards the top of mine due to the sharp angles of the tips. Or sliced in half for a wider print but easier details if bed adhesion and warping isn't an issue. Supports are a must for both. Focus on the interior portions and tips.</li><li>Grip - Simple part. Print with flared portion on the plate. Make sure to glue it with the cutout portion facing forward. Important for the wrap to be aligned with the cross guard.</li><li>Wrap - This is was a trickier part for me since it kept coming loose from the bed. It doesn't have a very wide base so bed adhesion is critical. Supports and brims help. Has a built in peg to lock it into the proper orientation.</li><li>Jewels and Blade surrounds - Super easy print. Glue peg into jewel with inset on the back. Glue surrounds on cross guard.</li><li>Pommel - Two parts for nicer printing. Use grip to help align while gluing halves together. Can remain removable with future upgrades...</li></ul><p>&nbsp;</p><h3>Video Demonstration</h3><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=AtKNojgwpLE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AtKNojgwpLE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Master Sword with interchangeable blades from Legend of Zelda Tears of the Kingdom 

toys

AP Engineering

<p>I needed a place to hold a couple of toilet papers in the toilet and didn't wanted to screw it to the wall, so I designed this simple, minimalist and modular toilet paper dispenser/holder.<br><br>Print a top & bottom pieces once and then print how many mid pieces you need, depending how many toilet papers you might need to save.</p><p>Obviously depending on the toilet paper you're using, you might need to scale it up or down to fit your toilet paper without falling over. This one is for 13cm diameter toilet paper.</p><p>&nbsp;</p><p>If needed some feet can also be easily designed and inserted on the bottom to give it the height/look you want. If you need some, but don't know how to design it, let me know and I can help you.</p>

Toilet Paper Dispenser / Holder

home

Markus710

<p>headphone & headset holder / stand / headset holder / hanger</p><p>&nbsp;</p><p>The bottom is hollow, if you want to put something heavy in there like sand. </p>

headphone holder / headphone stand / headset holder / hanger

 Gadgets

capsel22

<p>Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.</p><p>&nbsp;</p><p>Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.</p><p>&nbsp;</p><p>It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.</p><p>&nbsp;</p><p>To fit it, insert the top first onto the cable chain.</p>

toys

home

Gadgets

printer upgrades