Danny A.

3DPrintCreator

Bambulab AMS Dryer silicagel Perfect Fitting Fast Printing No Supports Needed X1C P1P P1S Upgrade

Bambulab AMS Dryer silicagel Perfect Fitting Fast Printing No Supports Needed X1C P1P P1S Upgrade 

Bambu Lab

Scubafan

My last clock design was a little bit overkill. Here is a much simpler design. It saves time, material and you wont need screws to assemble the clock. All you need to buy is the right clockwork&nbsp;Choose one of the 4 print profiles. The only difference is the time ring.The selected colors are only a suggestion, pick any color you want.&nbsp;That is the clockwork I used.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000110902/design/2023-12-27_5df50c2cffcd6.jpg">You find the clockwork on Amazon or Aliexpress&nbsp;Aliexpress: <a target="_blank" href="http://tinyurl.com/ypev4ze7" rel="nofollow noopener">http://tinyurl.com/ypev4ze7</a>

Apple Logo Clock

jasmin

3D Endeavors

this was an image i created from midjourney and then setup in hueforge as a learning process. Printing with a pre-made hueforge profile is a breeze just try and match the colors in the profile description as best you can, or feel free to mix and match if you'd rather not mess with the program itself! While an AMS makes this easier, its entirely unnecessary as these are layer swaps only. With your filaments of choice loaded and calibrated as usual, open the 3mf and slice the model. Add the following swaps at the intervals. Reslice and print. Swap Instructions: Start with Black At layer #10 (0.6mm) swap to Brown At layer #12 (0.68mm) swap to Orange At layer #17 (0.88mm) swap to Yellow At layer #23 (1.12mm) swap to White for the rest.

French Bulldog Hueforge

Hueforge

Mañolo

Infinite Skadis

Infinite Skadis

Ikea Skadis

MEAF designs

Easy to print and fun to make!Perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter and details are separated files so you can print it in different colors even without an AMS.&nbsp;Designed two styles for every “O”. so you can choose what you like.<ul><li>First "O": choose between santa claus or tree ornament</li><li>Second “O”: choose between snowman face or snowman body</li><li>Third “O”: choose between reindeer or christmas elf</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_n84evi4tipld.gif"></figure>&nbsp;split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_o1xtzxx4tz4i.png"></figure>&nbsp;&nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for letters and base. --- 0.2 for detailsNozzle diameter: 0,4mm or 0,6mmInfill: 10 -12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so you will need some glue depending on your printer and/or filament calibration&nbsp;&nbsp;&nbsp;

Christmas hohoho Sign

christmas

zemistr

With nozzle 0.4 mm you can set external perimeters to 0.99 mm and layer height up to 0.3 mm.With nozzle 0.6 mm you can set external perimeters to 0.99 mm and layer height up to 0.44 mm.

Bambu Lab

jasmin

Hueforge

Ikea Skadis

christmas

sonstige