Daniel_Hidalgo_89

juanmedinar20

F1 2022 looking body for the HPD EVO developed by Kent Asplund. It requires the ESC to be mounted vertically. Print vertically and halo doesn't need supports. Requires 2x M3x6-10mm fasteners to attach the nose to the body from the nose side. Tool clearance is not optimal on the nose but doable. Drive the screws into the main body first to cut the threads and after attach the nose. The main body is one piece that maybe to large for smaller printers. It might work with some brushless motors depending on the orientation for the cables to clear through.See my other other models for multi color printing with a wider body. Edit: added: split venturi for multicolor. Search my name for the 2022 rear wing and front wing for this body. Edit 2: The newest HPD Development front chassis will not work. Use the front chassis in this link.&nbsp;

RC F1: HPD EVO Optional F1 2022 NARROW Body "stock standard HPD wings"  Vertical ESC, brushed motor.

Morris

<h2>Hexagon Table Lamp For Light Socket & Bulb</h2>What to print:<ul><li>Top Frame - 1 piece.</li><li>Side Frame - 4 pieces.</li><li>Top Panes - Print all 1 time.</li><li>Side Panes - Print all 4 times (one complete series for each side frame).</li><li>Base - 1 piece.</li></ul><ol><li>Use a light socket, standard E27 as shown in the pictures. </li><li>Assemble and enjoy!</li></ol>&nbsp;I recommend that you print Glow in the dark PLA for the hexagon small panels and use a Philips HUE light bulb!

Hex Lamp For Light Bulb

Phillips hue

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

f1

Phillips hue

Daniel