scaled up and doubled the pin hole to accept screws. worked like a charm. great design!

2h48m, 134g. using the designers default profile the print had no issues

made minor modifications to fit my needs but design was perfect for what it was described as.

4h15m, 117g - using the designer default profile, print had no issues. Note: tolerance for bag holder is loose. doesn’t fit snug with shopping bags like “Fry’s” etc.

9h9m, 269g - using the designer default profile and ADDING lettering, the print had no issues

1h57m, 26g. using the designers default profile the print had no issues

1h17m, 22g - using the designer default profile the print had no issues aside from stand not fitting

44m, 19g - using the default designer profile the print had no issues, although the design has room for improvement as there are objects floating and therefore break off from design such as mirror and from accent.

5h16m, 81g - using the designers default profile the print had no issues.

4 versions @ 1h25m, 36g

3x @ 2h16m, 77g - using the designers default profile the print had no issue

5x @ 1h32m, 41g - using the designer default profile the print had no issues. printed in 3DHOJOR GRAY PETG

3x @ 1h51m, 68g. using the designer default profile the print had no issues

printed (3) @ 3h4m, 153g each. using the designers default profile and scaling down to 87%, the print had no issues.

printed with no issues. works great!

35m, 21g - using the designer default profile yielded no issues

40m, 16g - using the designers default print profile there were no issues.

using designer default profile. print had no issues. plate 1 - 1.4h, 44g plate 2 - 6h12m, 107g

3h60m, 53g - using the designers default profile the print had no issues

26m, 7g for 2 - using the designer default profile the print had no issue