DK Armory

rich190

Star Wars The Mandalorian Lightbox

Star Wars The Mandalorian Lightbox

Light Boxes

EmBy Designs

First in the series.Not suitable for users who consistently remove the SD Card as there is no access hole.&nbsp;2 versions; AMS and non-AMS. AMS - Push the Joy Cons onto the frame. Non-AMS - All parts are push-fit and do not require glue but there is no harm in using a few drops for peace of mind.

X1 Carbon Screen Decoration Nintendo Switch

Printer stuff

Desmodromic

Love these hex pattern baskets, bins or trays for organizing things around the house. This one was a request from my spouse and is easily scaled vertically if you need to adjust the height. Just watch if you scale too short in the Z axis as the overhang on the hexagons gets rough. These are a little over 6 1/4" long, 4" wide and around 4-1/8" tall (160mm x 100mm x 105mm) on the exterior. I designed in strong corners and edges and some small support ribs on the long hex pattern surfaces. They print nicely in PLA and are efficient on filament, around 86g per basket. My recommended designer profile has 5 top and bottom layers for strength and speed. Print times are long due to the pattern but I like how they look and how lightweight they are.

Pantry Organizer Basket

Home

Zurlingo-3D

<h2>3D MODEL DESCRIPTION</h2>Tower Bridge ChallengeThis is a test model I designed, to test out the capabilities of my Creality sprite cooling duct 'Uproar'It's a fun little challenge and tests a lot of different aspects of your 3D printer.<ul><li>200mm single extrusion, unsupported bridges.</li><li>Unsupported Arches.</li><li>3mm Towers.</li><li>Embossed Text.</li></ul>The challenge is to successfully print this model in under 1hr. If you achieve that, then you have passed.There is also bragging rights for whoever prints this model in the quickest time.The current record time is: 43m53s.I'll be updating this listing with the current fastest time, as and when it gets broken.Please document your print with pictures and include a screenshot of your klipper print history, showing the actual print duration.You can also post a make on this model, so everyone else can see your results.Here's a video of a successful print: <a target="_blank" href="https://www.youtube.com/watch?v=CJ_I3uY6id0&t=3s" rel="nofollow noopener">LINK</a>Good luck!<h2>3D PRINTING SETTINGS</h2>The only settings that are required are:<ul><li>0.2mm Layer height</li><li>0.4mm Nozzle Diameter</li></ul>Everything else is up to you!

TOWER BRIDGE CHALLENGE - PRINTER SPEED, BRIDGE AND TOWER TEST.

Printer Stuff

WF3Dprinting

These are the 3D files (.stl) of the Axe from Assasins Creed Valhalla. It is referenced in size and look to match the video game. The axe is around 60 cm (~ 23,6 in) long. The 3D files containmultiple versions of the head and handle, so that the axe can be printed on a printer with a build volume of 20x20x20 cm (7,8x7,8x7,8 in) You can see a full build right here: <figure class="media"></figure>

Assassin's Creed Valhalla Eivors Axe

Props

fay3dlab

Im currently upgrading most of my suspended models to include channel to install led strips in them.. So for the suspended star destroyer V2.. since its already in 2 parts.. i added a channel path so you can install a LED strips around the outer frame.. and i put small holes in the inner frame so that the lights from the LED shines through to the ship..&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/516767/2024-01-01_27386ae7989a8.gif"></figure>&nbsp;If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light https://s.click.aliexpress.com/e/_oEk0hDa &nbsp;The ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad..&nbsp;The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..&nbsp;I hope you guys have fun printing this new version of the suspended imperial star destroyer..

Suspended Star Destroyer V2 LED strips

Suspend Models

Mr3DCraft

This model is designed to be printed on a Bambu with AMS or Multicolour printer.&nbsp;It is currently set up to be a coaster, however could be resized to make great wall, a sign or fridge magnet. Print the model face down on a PEI textured plate to get the full effect of the design.&nbsp;Please note that for the time being, this design is for personal use only.

MAJORA'S MASK - LEGEND OF ZELDA

Zelda

This model is designed to be printed on a Bambu with AMS or Multicolour printer.&nbsp;&nbsp;It is currently set up to be a coaster, however could be resized to make great wall, a sign or fridge magnet. Print the model face down on a PEI textured plate to get the full effect of the design.&nbsp;&nbsp;Please note that for the time being, this design is for personal use only