This came out way better than I expected they would! I am not sure if that is due to a good file or if they are all like this, but I am really impressed with this, whichever it is. It should go well with the other Fifth Element pieces I have!

This printed well in BL ASA.

These look good and printed well. I scaled down some, and had one bit of bed adhesion failure, so out came the engineering print. The farmer whose land we use suggested we could do with smaller ones, smaller would still work, maybe even down t0 30% -I had a 100% and 2 50% ones on me. Let's see how these work! Printed in Sunlu PETFG. Pretty support up the middle too lols.

I had printed 6 of these, and I was waiting on my ladder to return so I could deploy these. The woods we use are part of the farm, and the farmer was down the other day so I showed him these. He pointed out some issues. The hole is a bit low to the floor, and even the fact there is a floor there is a bit of a problem. The chicks could fall out too easily, and things could attack the nest too easily. Apart from that the print look good, except the alignment pins I had issues to work. On one I cut them off and tried to glue a hinge on but I messed that up. So I just glued it. Another issue was it could possibly do with a drainage hole. So we are going to try to use them buried in ivy etc so that maybe wrens would use them more. We will see.

printed 2 of each type, all on one bed of a P2S. I didn't realise these were for Paper Wasps, therefore not much real use for us here in Wales. Check what the decoy is for before printing I guess. So, apart from them not being any use to me these printed really well, and look really good...

This printed out fine, PETG Transparent for the box, and ASA for the supports. Waiting on the kit to build.

These printed well, using BL Trans PETG. The only issue I have is that I printed a different model of anti tilt cradle..... I think jumping around I totally missed the fact that the models were different, I think I missed the link to Printables...... So of course they don't fix exactly, and I have rubbing on the spool. So, do I ignore that, seeing as I probs will only use this for drying, or, print the right ones - but I need to get some hardware first......? Regarding the model, it seems to be pretty tough, printed in PETG as you know, it will see some heat- maybe need to print in ASA - I don't do ABS yet- so I will see. I have 2 AMS 2 and one HT so far, so I don't think I will be printing from here- at least not yet.... maybe with the next printer.... Anyhoo - ignoring my mistakes, these look good, just need some testing to see if PETG is enough.

Another nice little nook. This all printed well, done in BL PLA. Just need to find something to go in there now!

Seems to be a nice dryer but wow, how did they expect you to use those handles?? Luckily there are loads of improvements on MakerWorld, and I picked these. Printed in Transparent PETG.

Small issue with the top two parts being a bit loose, but the others seem fine.... Printed with BL GID, because why not!

So this has been my most complicated print so far, I think. This wasn't helped with "needing" to print some other stuff in-between plates etc. It was also hard to not "play" with various bits as they were printing lol All in all, it all looks good, and pretty happy with it. I printed this in a range of BL and Sunlu filament, inc. some glow int he dark.

Hinges seem good, I expect to use them a lot in future. No photos this time as how I was trying to use them failed... Nothing to do with the hinges, it was what I did.

So..... You have to download all the plates to get all the parts. New to printing but not come across that before. (Was it due to different settings for each plate??) AND.....This is why this is a cut n paste job. Overall, pretty nice print. It was my first print with PLA and PETG - used to make separating parts from supports.... From what I was expecting it really wasn't that easy to separate! I also wasn't able to remove supports from inside the door surround bit, the part that is meant to be used for the lock. No biggie, but I wasn't sure why I wasn't able to properly, again, I am new to printing. So, overall, a pretty nice vault. And it maybe one that has some use, unlike the others I have done so far. It all looks good, pretty happy.

So..... You have to download all the plates to get all the parts. New to printing but not come across that before. (Was it due to different settings for each plate??) AND.....This is why this is a cut n paste job. Overall, pretty nice print. It was my first print with PLA and PETG - used to make separating parts from supports.... From what I was expecting it really wasn't that easy to separate! I also wasn't able to remove supports from inside the door surround bit, the part that is meant to be used for the lock. No biggie, but I wasn't sure why I wasn't able to properly, again, I am new to printing. So, overall, a pretty nice vault. And it maybe one that has some use, unlike the others I have done so far. It all looks good, pretty happy.

So..... You have to download all the plates to get all the parts. New to printing but not come across that before. (Was it due to different settings for each plate??) AND.....This is why this is a cut n paste job. Overall, pretty nice print. It was my first print with PLA and PETG - used to make separating parts from supports.... From what I was expecting it really wasn't that easy to separate! I also wasn't able to remove supports from inside the door surround bit, the part that is meant to be used for the lock. No biggie, but I wasn't sure why I wasn't able to properly, again, I am new to printing. So, overall, a pretty nice vault. And it maybe one that has some use, unlike the others I have done so far. It all looks good, pretty happy.

So..... You have to download all the plates to get all the parts. New to printing but not come across that before. (Was it due to different settings for each plate??) AND.....This is why this is a cut n paste job. Overall, pretty nice print. It was my first print with PLA and PETG - used to make separating parts from supports.... From what I was expecting it really wasn't that easy to separate! I also wasn't able to remove supports from inside the door surround bit, the part that is meant to be used for the lock. No biggie, but I wasn't sure why I wasn't able to properly, again, I am new to printing. So, overall, a pretty nice vault. And it maybe one that has some use, unlike the others I have done so far. It all looks good, pretty happy.

They fit, they cover.... Not sure if needed but pretty much everything else has been coloured so..... The only issue I would say, was that I printed a fairly light yellow.... And it is right in front of the camera.... Its not terrible but something to think about when picking colours. I did sand down the ends where yet more covers are, and the magnets have not arrived yet but all good , they fit and don't seem to be moving.

Printed some more in PETG Transparent. Added some text to one as a test - new to printing and this was my first time using the text tool, and it came out ok, maybe a bit bigger would have been good - my text I mean. Yet to test but I tested the one with text with no issues, so I expect these will be fine.

And....... A bigger shelf! So I went for the more square one, as atm that is what would fit. Thx for making some more holders, some good options now!

So, a mixed result in this one. The detail level on layers made these extremely long prints, for the size. I came int an issue I have not really had to deal with, which was warping. and it could be the prints are big so they are close to the fan output....or something else, I don't know. So, no reprints and I just glued it together. They will sit on the display and not move so, yeah, it will do.