It was a really long print. But it turned out great.

Awesome idea and works great. It adds a nice feel to the chips.

This came out great. I made one change by making the sides blue. My son really likes it. It comes in great use for rolling dice and keeping it from falling off the table.

Everyone loved the nice addition to Wingspan. Mostly we use it to hold resources.

Prints well. Works as advertised!!

I printed the one with the rounded outside. I "snapped" a pair on to a roll of Elegoo that was giving me some problems when retracting, and then the problem went away. (I noticed I really needed to make sure they were in place, not hard, just a detail.) I love the way Elegoo turns out. Cardboard is ok, this is the first time I have had a problem with it. And the fix appears to be these. So, I printed 4 sets. I went ahead and snapped them on another Elegoo spool I wasn't having a problem with, but I did notice the AMS motors seem to whine a little less with the added rings. So double win. Good job, thanks for the design.

Worked out as expected. Added a little gorilla glue to keep them in place and everything fit and works well. I wanted something to keep four sets of Billy shelves off the basement carpet in the even there are any water accidents. These should do the trick without a problem... Printed in white PLA.

Works great. A friend requested it printed for some dice he had picked up. The dice required me to increase the size by 25%. Printed it in purple and used a black glitter for the tree and bats inlay.

Works great. I really like that it can be put together without the need for extra parts. Everything needed is included in the print. I use it when walking laps. I forget what lap I am on a lot. Will also be using it when doing other repetitive type exercises or practicing some things.

Pet in PETG. Printed a few of them since I have a lot of Milwaukee Packout boxes. They work great when using carabiners to hang items from temporarily when working on projects.

Came out great. It did take 3xs longer than listed. However, that was due to the pla support filament I used for the interface. It made separating the support tress supper easy. Printed on Bambu P1S .04 nozzle Red Bambu PLA Basic Bambu PLA Support

Printed it in PETG. It worked great. The corners lifted off the plate a little. It is really plain but functional. Basically, right now it is a super tough pen, pencil, highlighter, & stylist box. I had wanted to test the sliding lid function. It should be great with a few extra personal tweaks for a couple of tools I would like it to hold. Along with learning how to include writing in a different color on the side(s). (Yea, I know, I so need to learn to use fusion 360.) I need to make something to hold my Dr Who Jr screwdriver and bits. (DEWALT Cordless Screwdriver with FLEXDRIVE Control and Screwdriving Bits (DWHT66719)) Because everyone always needs good screwdriver accessible.

This came out great. It had a really nice sound to it.

Worked perfect!! I may even take it with me to the next renaissance fair. (FYI. My horn has a metal bottom for screwing on when using it as a drinking device and taking off for using it as a horn. So, think this was cool.)

Great helpful addition to the printer setup. I really like being able to take the lid of and sliding it in the holder where it won't get damaged by accident. I printed the entire thing in PETG without any issues.

Nice alternative test print from the normal benchy.

Printed two of these. The work well cleaning off the nozzle between large prints.

They work great. I did make a couple of mods. I changed the infill to 20% and changed the walls from 2 to 4. These were mainly done to add a little more stiffness. I think the overall design is great. (I printed some in PETG as well for some small metal items that are getting shaped.)

It works great. I did have to file it down in the middle where the two pieces join in order for it to fit properly in the P1S.