CriscoDesigns

mingshiuan99

Reuse the waste materials generated by washing materials, Are you still struggling with the poop produced by multi-color printing materials? It is useless to keep it, and it would be a pity to throw it away.&nbsp;Colored Vase - Cleaned Filament Filling1. Use transparent materials to print, 2. Print the vase with zero filling. When printing reaches 60%, press the Pause button. 3. Place multi-color waste materials in the hollow-filled vase<img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_2aaa7cd5fccf8.jpg"> 4. Then continue printing 5. When printing reaches 90% (or 450 layers), press the pause button 6. Place multi-color waste materials in the hollow-filled vase<img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_8fd9589d57b94.jpg"> 7. Then continue printing and complete printing.<img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_f9002c7d404b7.jpg">&nbsp;&nbsp;Colorful Bowl - Cleaning Filament Filling 1. Use transparent materials to print, 2. Print the bowl with zero filling. 3. When printing is complete, place the multi-color waste materials into the hollow-filled bowl 4. Print the lid and cover the bowl to prevent waste materials from falling<img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_1dac08f933bac.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_2863427e9c7e2.jpg">&nbsp;Multi-colored scraps become colorful fillings and exterior colors. The more saturated the color, the better the color rendering.&nbsp;It can be scaled and resized.&nbsp;Powered by Make My Vase from MakerWorld (makerworld.com/makerlab/makeMyVase)&nbsp;MORE PHOTOS OF WORKS:<a target="_blank" href="https://mingshiuan.blogspot.com/2024/04/blog-post.html?m=0" rel="nofollow noopener">https://mingshiuan.blogspot.com/2024/04/blog-post.html?m=0</a>&nbsp;Other related downloads:Pentagon curve vase -  Cleaned Filament Filling - <a target="_blank" href="https://makerworld.com/zh/models/416130" rel="nofollow noopener">https://makerworld.com/zh/models/416130</a><img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-06_b575d99a8721a.gif">&nbsp;<a target="_blank" href="https://makerworld.com/zh/models/427809" rel="nofollow noopener">Hexagonal star curve Vase and Bowl</a> -  <a target="_blank" href="https://makerworld.com/zh/models/427809" rel="nofollow noopener">https://makerworld.com/zh/models/427809</a><img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-14_77b8306d6a315.gif">&nbsp;Letter A - <a target="_blank" href="https://makerworld.com/zh/models/151923" rel="nofollow noopener">https://makerworld.com/zh/models/151923</a> Letter B - <a target="_blank" href="https://makerworld.com/zh/models/151925" rel="nofollow noopener">https://makerworld.com/zh/models/151925</a> Letter C - <a target="_blank" href="https://makerworld.com/zh/models/151927" rel="nofollow noopener">https://makerworld.com/zh/models/151927</a> Letter D - <a target="_blank" href="https://makerworld.com/zh/models/151931" rel="nofollow noopener">https://makerworld.com/zh/models/151931</a> Letter E - <a target="_blank" href="https://makerworld.com/zh/models/151942" rel="nofollow noopener">https://makerworld.com/zh/models/151942</a> Symbol &amp; - <a target="_blank" href="https://makerworld.com/zh/models/151936" rel="nofollow noopener">https://makerworld.com/zh/models/151936</a> Letter F - <a target="_blank" href="https://makerworld.com/zh/models/151945" rel="nofollow noopener">https://makerworld.com/zh/models/151945</a> Letter G - <a target="_blank" href="https://makerworld.com/zh/models/151949" rel="nofollow noopener">https://makerworld.com/zh/models/151949</a> Letter H - <a target="_blank" href="https://makerworld.com/zh/models/151952" rel="nofollow noopener">https://makerworld.com/zh/models/151952</a> Letter I - <a target="_blank" href="https://makerworld.com/zh/models/151958" rel="nofollow noopener">https://makerworld.com/zh/models/151958</a> Letter J - <a target="_blank" href="https://makerworld.com/zh/models/151961" rel="nofollow noopener">https://makerworld.com/zh/models/151961</a> Letter K - <a target="_blank" href="https://makerworld.com/zh/models/151965" rel="nofollow noopener">https://makerworld.com/zh/models/151965</a> Letter L - <a target="_blank" href="https://makerworld.com/zh/models/151969" rel="nofollow noopener">https://makerworld.com/zh/models/151969</a> Letter M - <a target="_blank" href="https://makerworld.com/zh/models/151971" rel="nofollow noopener">https://makerworld.com/zh/models/151971</a> Letter N - <a target="_blank" href="https://makerworld.com/zh/models/151975" rel="nofollow noopener">https://makerworld.com/zh/models/151975</a> Letter O - <a target="_blank" href="https://makerworld.com/zh/models/151978" rel="nofollow noopener">https://makerworld.com/zh/models/151978</a> Letter P - <a target="_blank" href="https://makerworld.com/zh/models/151984" rel="nofollow noopener">https://makerworld.com/zh/models/151984</a> Letter Q - <a target="_blank" href="https://makerworld.com/zh/models/151988" rel="nofollow noopener">https://makerworld.com/zh/models/151988</a> Letter R - <a target="_blank" href="https://makerworld.com/zh/models/151995" rel="nofollow noopener">https://makerworld.com/zh/models/151995</a> Letter S - <a target="_blank" href="https://makerworld.com/zh/models/151999" rel="nofollow noopener">https://makerworld.com/zh/models/151999</a> Letter T - <a target="_blank" href="https://makerworld.com/zh/models/152007" rel="nofollow noopener">https://makerworld.com/zh/models/152007</a> Letter U - <a target="_blank" href="https://makerworld.com/zh/models/152015" rel="nofollow noopener">https://makerworld.com/zh/models/152015</a> Letter V - <a target="_blank" href="https://makerworld.com/zh/models/152022" rel="nofollow noopener">https://makerworld.com/zh/models/152022</a> Letter W - <a target="_blank" href="https://makerworld.com/zh/models/152024" rel="nofollow noopener">https://makerworld.com/zh/models/152024</a> Letter X - <a target="_blank" href="https://makerworld.com/zh/models/152026" rel="nofollow noopener">https://makerworld.com/zh/models/152026</a> Letter Y - <a target="_blank" href="https://makerworld.com/zh/models/152031" rel="nofollow noopener">https://makerworld.com/zh/models/152031</a> Letter Z - <a target="_blank" href="https://makerworld.com/zh/models/152033" rel="nofollow noopener">https://makerworld.com/zh/models/152033</a>Number 0 - <a target="_blank" href="https://makerworld.com/zh/models/152063" rel="nofollow noopener">https://makerworld.com/zh/models/152063</a> Number 1 - <a target="_blank" href="https://makerworld.com/zh/models/152067" rel="nofollow noopener">https://makerworld.com/zh/models/152067</a> Number 2 - <a target="_blank" href="https://makerworld.com/zh/models/152069" rel="nofollow noopener">https://makerworld.com/zh/models/152069</a> Number 3 - <a target="_blank" href="https://makerworld.com/zh/models/152075" rel="nofollow noopener">https://makerworld.com/zh/models/152075</a> Number 4 - <a target="_blank" href="https://makerworld.com/zh/models/152078" rel="nofollow noopener">https://makerworld.com/zh/models/152078</a> Number 5 - <a target="_blank" href="https://makerworld.com/zh/models/152082" rel="nofollow noopener">https://makerworld.com/zh/models/152082</a> Number 6 - <a target="_blank" href="https://makerworld.com/zh/models/152088" rel="nofollow noopener">https://makerworld.com/zh/models/152088</a> Number 7 - <a target="_blank" href="https://makerworld.com/zh/models/152090" rel="nofollow noopener">https://makerworld.com/zh/models/152090</a> Number 8 - <a target="_blank" href="https://makerworld.com/zh/models/152092" rel="nofollow noopener">https://makerworld.com/zh/models/152092</a> Number 9 - <a target="_blank" href="https://makerworld.com/zh/models/152095" rel="nofollow noopener">https://makerworld.com/zh/models/152095</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-01-25_78139ec61d07c.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-01-26_c13899bf62719.jpg">&nbsp;Heart light box / Scrap storage box / storage box / Candy storage box - <a target="_blank" href="https://makerworld.com/zh/models/174117" rel="nofollow noopener">https://makerworld.com/zh/models/174117</a><img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_33a027a3c4f1a.jpg">&nbsp;Shamrock Three Leaf Clover light box - <a target="_blank" href="https://makerworld.com/zh/models/178000" rel="nofollow noopener">https://makerworld.com/zh/models/178000</a><img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_f6511402fa5bd.jpg">&nbsp;Shamrock Four Leaf Clover light box - <a target="_blank" href="https://makerworld.com/zh/models/178007" rel="nofollow noopener">https://makerworld.com/zh/models/178007</a><img src="https://makerworld.bblmw.com/makerworld/draft/855103/2024-04-05_c406355e3e0d.jpg">

Colorful Vase and Bowl - Cleaned Filament Filling

Printer Poop Projects

jdicerchio

Spice up your summer with these strawberry earrings! This print profile is for a 0.04 nozzle and it works great but a 0.02 nozzle gives much better results if you are having issues.&nbsp;Other earrings available here!&nbsp;Strawberry Earrings: https://makerworld.com/en/models/504789#profileId-420444Pencil Earrings: https://makerworld.com/en/models/504778#profileId-420433Orange/Lime/Lemon Earrings: https://makerworld.com/en/models/504776#profileId-420426Avocado Earrings: https://makerworld.com/en/models/504768#profileId-420418Watermelon Earrings: https://makerworld.com/en/models/498705#profileId-413337Firecracker Earrings: https://makerworld.com/en/models/477719#profileId-388811&nbsp;

Strawberry earrings

Commercial Use Ok

Sakul

🍦Pop &amp; Catch Toys Ice Cream Cone🍦 The Pop and Catch Ice Cream Toys are the perfect pastime activity for a beach days or playing in the garden! These Pop &amp; Catch launchers are designed to resemble colorful ice cream cones can be used with normal platic balls like a ping pong ball or even with a 3d printed version. For assembly, put the cage on top and twist, for the launch mechanism you need a rubber band, use a shorter one for more power. The Flipper is inserted from the side of the cone and clipped into postition, now hook the rubber band in place, there are different options to do this, depending on the length of your rubber band. Have fun!

Pop & Catch Toys Ice Cream Cone

beach

GlennovitS 3D

This is the desktop organizer for you, who needs those essentials close to you when working, to make it even easier to start working! Fits great under a desktop monitor due to the angled orientation, and makes everything easily accessible. There are different ways of customizing it to your needs - different kind of Inserts and colors. Would love to see you versions!<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/450292/2024-01-15_85e3a32a318ca.gif"></figure><h2>Overview</h2>The model is made of the Shell - the outer most walls that keeps everything in place. You can just use the Shell alone as it is, or you can print some colorful Inserts to add some personality and functionality (like specific SD-card storage). The Inserts are named 1-6 from the top-left corner (see image). The inserts availble are:<ul><li>Insert 1<ul><li>Plain</li></ul></li><li>Insert 2<ul><li>Plain</li></ul></li><li>Insert 3<ul><li>Plain</li></ul></li><li>Insert 4<ul><li>Plain</li><li>SD-card slots</li></ul></li><li>Insert 5<ul><li>Plain</li><li>SD-card slots</li></ul></li><li>Insert 6<ul><li>Plain</li></ul></li></ul>Do you like the concept, but miss a certain specific insert-type, then please let me know. If possible I’ll try to make more insert-types to fit more needs.<h2>Assembly</h2><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/450292/2024-01-15_c26defbb19f2.gif"></figure>This is easy! No glue or anything needed!<ol><li>Print Shell and Inserts</li><li>Slide the Inserts into the correct placements (dont glue them together, as this would prevent you from changing to a different kind of insert later on)</li><li>Fill up with you pens, paper, SD-cards and whatever you need</li></ol><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/450292/2024-01-15_04e9e969359a7.jpeg"></figure><h2>Print instructions</h2>Here are a few tips to print as easy as possible.<ul><li>Orientation: The models are oriented in the correct print position</li><li>Brim: Yes it's recommended - to keep everything in it’s place without warping and making parts not fit together</li><li>Supports: No - not needed.</li><li>Colors: I made the one for my desk with a neutrual Shell and some bright colors as some of the inserts. But please choose whatever you like, and remember to share an image :-)</li></ul><h3>Want more flexibility?</h3>Try my new Gridfinity Desktop Pack - pick the items and sizes you want and organize your way!<a target="_blank" href="https://makerworld.com/en/models/147449#profileId-160885" rel="nofollow noopener">https://makerworld.com/en/models/147449#profileId-160885</a>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Tilted Desktop Organizer (minimal, modern and colorful storage)

office 

croc

pbbence1994

My next kit card is based on a Red Bull Air Race MXS-R plane. Cut the parts out with pliers, nail sissors or hobby knife. The assembly is easy and self explanatory. The parts should fit togedhter tightly, but you can always use a bit of super glue to secure the parts together. Stay tuned for more Air Race planes! The pylon display will be also available to download soon check out my profile. Have fun printing it!

Air Race plane kit card (MXS-R Breitling)

kit card

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Pokemon 

Waikikiprod

<h2><a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener">Follow me </a>to discover other 3D models</h2>Few Models of <a target="_blank" href="https://makerworld.com/en/u/3378101082/collections/443047" rel="nofollow noopener">my pokemon design collection</a> :<figure class="table" style="width:100%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/150499#profileId-164218" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-02-22_fb5492d030f06.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/150499#profileId-164218" rel="nofollow noopener">Poliwag - Pokemon #60</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/158643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-02-22_bdf004f8a6305.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/158643" rel="nofollow noopener">Poliwhirl - Pokemon #61</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/168921" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-02-22_a0ad2f82e817c8.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/168921" rel="nofollow noopener">Poliwrath - Pokemon #62</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/209225" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-02-28_38c9ef6d673868.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/209225" rel="nofollow noopener">Magikarp - Pokemon #129</a></td><td><figure class="image"><a href="https://www.instagram.com/waikikiprod/" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-02-22_5f9eac411bf99.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/181530" rel="nofollow noopener">Pokeballs coasters</a></td><td><figure class="image"><a href="https://www.instagram.com/waikikiprod/" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-02-22_f678bc547b812.png"></a></figure><a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener">Follow the project on Instagram</a></td></tr></tbody></table></figure><blockquote><h3><a target="_blank" href="https://www.instagram.com/reel/C24bJDMtgH4/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==" rel="nofollow noopener">Assembly video</a></h3></blockquote>&nbsp;Currently learning 3D sculpting, I decided to practice by designing these pokemons!I used the Nomad Sculpt app on my Android tablet.The evolutions will soon be available on my <a target="_blank" href="https://makerworld.com/en/u/3378101082" rel="nofollow noopener">MakerWorld page</a>, so subscribe! ;)&nbsp;<h3>Thanks to you and your downloads, this 3D model is free! Thank you so much !!! <3</h3>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons</a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:61.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2024-01-21_6a0b5851372128.gif"></figure><a target="_blank" href="https://makerworld.com/en/models/78331#profileId-82574" rel="nofollow noopener">Lockable present - ingenious mechanism</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/600662/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Poliwrath Mega Angry - Pokemon #62

to print 

&nbsp;Brighten up your office breaks with this fun mini table foosball game.A fully functional table soccer set to challenge your colleagues. All you need, aside from the printed parts, are 20 M3x10 and 12 M3x20 screws, and some CA Glue. For assembly, print out all the parts, and start by gluing the playfield into the base. Screw the legs and the ball catchers to the base; you can screw them directly into the plastic, as it will be plenty strong. <figure class="image image_resized" style="width: 61.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_6c8651f7c1e8.jpg"></figure> Glue the side caps into the base, slide the rods in from the side, and also stick the figurines on the rods. The figurines will be fixed in place using the M3x10 screws. All the TPU parts can now be attached using CA Glue. Glue the handles and end caps on the rods, also attach the TPU feet to the legs. The ball is made by gluing the two halves together.<figure class="image image_resized" style="width: 34.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_3727bab3bdd4.jpg"></figure>Lastly, slide the goal indicator over the display shield and then attach it to the base. Have fun playing!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>  Check out my newest Uploads: <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-06-04_09fc049f7c6e.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-05-01_6d8b75eefb4a4.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Office Mini Desk Foosball Table

games

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/b50369d8-d175-46ad-80d6-b86a1393e919">These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the boosters. The larger rocket has four small boosters and the smaller rocket has one large booster.  These make great little gifts or party favors 🚀&nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/41d3f34e-0eac-43be-ba01-6c384316d3ca">Layer Height 0.2mmPLA works great15-20% InfillSupports needed for the area around the boosters on the Large Rocket&nbsp;Dimensions of Large Rocket: 4in x 2 3/8inDimensions of Small Rocket: 3 1/4in x 1 7/8in&nbsp;There are two ways you can print these rockets (I included both in their print profiles):<ol><li>Print the complete rocket: this prints great but if you want multi-color for the boosters (and/or fins) it’s going to take some time (I found 8-10hrs)</li><li>Print the boosters first, print the rocket second pausing at layer height 15.6mm for the large rocket and 30.6mm for the small rocket, drop the boosters in and then continue printing. This method is much faster:)</li></ol>&nbsp;In the print profile for the small rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the boosters, so they can be printed separately (make sure to print the boosters first:)&nbsp;In the print profile for the larger rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the 4 sets of small boosters so they can be printed separately (again make sure to print the boosters first:)&nbsp;Note: supports are needed for the larger rocket at the base around the rings for the boosters. I have included those supports in my print profile. (Also note if you are printing plate #3, I did not include supports in the booster chambers so that they are clear to drop the boosters in:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/5e3a3622-4ff3-47e6-adc2-303a5155681a">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/e757d34e-1fcd-4b04-b6fe-8c0d913c3a49">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing these…they’re a blast 🚀

Rocket with Boosters (2 Sizes)

movable

bennny

I modeled this stackable coaster design awhile ago and I had been looking for something to print on them. While at a bar I saw they had some branded coasters with beer logos and that made me want to print some of my favorite cheap/light beers!&nbsp;I currently have 13 different (although there are 2 Miller Lite versions) 3MF's available for download. Some are very easy (not very fine details) to print while others are much hard (lots of very fine details), and some inbetween. I have indicated their difficulty to get a successful print next to their brand names. <ol><li>Budweiser (HARD)</li><li>Coors Light (EASY)</li><li>Heineken (MED)</li><li>Michelob Ultra (MED)</li><li>Miller Lite V1 (EASY)</li><li>Miller Lite V2 (HARD)</li><li>Miller High Life (EASY)</li><li>Guinness (EASY)</li><li>Shiner Bock (MED)</li><li>Bud Light (EASY)</li><li>Rolling Rock (HARD)</li><li>Sol (EASY)</li><li>Dos Equis (EASY)</li></ol><h3>Tips For A Successful Print</h3>Some of these print are genuinely difficult to to get to print right and require good filament calibration and some trial and error. Print profiles simply cannot account of all the different unique variables for each printer and printing environment. The first layer is printed at 0.3mm width, which is significantly less than Bambu Studio's default 0.52mm width. This means good bed adhesion is incredibly important. <ol><li>Make sure your print bed is clean and if you are using glue it is PROPERLY applied. I use the Textured PEI Plate from Bambu Lab, which gives a nice finish, in my opinion, and has good adheasion. Make sure you watch the bed between prints or at least wipe down the plate with isoproply alcohol between prints.</li><li>Turn off the Auxiliary Fan. This coaster model really wants to warp and the excessive cooling from the aux fan will guarantee warping. You can do this in your printer settings at the top of Bambu Studio (or Orca Slicer) and create a new profile named NO AUX FAN or you can manually disable it during the print, but I would reommend changing it in the print profile itself so you don't forget.</li><li>Keep the door closed/barely cracked if you have a P1S or X1C. If you have a P1P or A1 series printer, just do your best to prevent air drafts from passing of your print bed, because that will lead to warping. As always, you know your printer, so just use your own knowledge on how to get successful prints. </li><li>Go SLOW. The first layer has a travel speed of 25mm/s to reduce the amount of stringing and increase the chance of solid contact. I use Orca Slicer when originally making these, which has an option to slow down the first few layers, whereas Bambu Studio does not have this option. Your mileage may vary here and this is going to depend person to person and printer to printer, so apply your own knowledge of your printer and environment. </li><li>Increase bed temperature. PLA typically prints on Bambu Lab printers at a default 55 degrees celsius. I bumped this up to 60 degrees and basically eliminated warping from my prints (if you look closely in the pictures you can see warping on some of the coasters, those were earlier prints as a refined the profile and printing environment). </li></ol>If you follow these tips, you will maximize your chance at a succssful print. While some of these coasters are very easy prints and broad details that any printer can handle, others are quite intricate and require a skilled printer to get good results with. I would watch the first layer go down and stop it if I noticed an issue.&nbsp;I request that people DON'T upload other profiles, because what works for you will not work for someone else. I gave the best possible profile already to ensure success, but it may require manual tweaking from the individual users to get the print they want.&nbsp;If you have any brand requests, questions, or printing advice, please leave them in the comments or DM me. &nbsp;Thanks and happy printing!

Stackable Beer Brand Coasters

coasters

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

Camping 

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

business 

Archer

Description:A mini bartop arcade machine printed with a 3D printer is a compact and stylish device designed to provide an authentic retro gaming experience.&nbsp;Features:<ul><li>Compact Design The arcade machine features a bartop-style compact design, meaning it is small enough to be placed on a table or counter. Its reduced size makes it perfect for limited spaces, such as living rooms or desks. </li><li>4:3 Screen The arcade machine's screen features a 4:3 aspect ratio, providing an authentic retro gaming experience. This is ideal for classic games that were originally designed with this proportion, avoiding distortions and maintaining visual fidelity. </li><li>High-Quality Sanwa Controls The control system incorporates a joystick and buttons from the Sanwa brand, renowned for offering some of the best controls in the arcade machine market. Sanwa joysticks are known for their smoothness and precision, providing a precise and comfortable gaming experience. </li><li>Connections and Connectivit It includes 2 USB ports for easy connection to other devices and peripherals such as additional controllers. </li><li>Wide Game Compatibility The machine is compatible with a wide variety of retro games thanks to its versatile design. It can emulate systems such as NES, SNES, Sega Genesis, MAME, and more, offering users a broad selection of classic titles. </li><li>Customizable LED Lighting The arcade machine can include customizable LED lighting to add an attractive visual touch. The LEDs can be adjusted to different colors, creating a retro and modern atmosphere at the same time. </li><li>Integrated Sound System with Powerful Subwoofer The mini arcade machine features an integrated sound system that includes a powerful subwoofer. This subwoofer speaker enhances the sound quality by providing deep and powerful bass. This feature contributes to a more immersive gaming experience, bringing retro sound effects and music to life with exceptional audio quality, adding an extra element of realism to the gaming experience. </li><li>Assembly Manual Complete manual that provides detailed instructions for the assembly of the machine, covering both the assembly of the printed parts and the connection of the electronics.</li></ul>&nbsp;&nbsp;&nbsp;Links to electronic parts (Click on the images to go to the link) Updated 27-12-2023The links only work from the website, the Handy app only opens the images<ul><li>LG Display LCD 4:3 1024x768 9.7" LP097X02 KIT Select item “AudioDrive A and LCD” <a target="_blank" href="https://www.aliexpress.com/item/4000525667758.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_61893dad990928.png"></a></li></ul>&nbsp;<ul><li>Power supply 12v 2A 24W <a target="_blank" href="https://www.aliexpress.com/item/1005004233586635.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_6ad9178c79acd.png"></a></li></ul>&nbsp;<ul><li>Power supply 12v 12.5A 150W Select item "DC12V 12.5A 150W" <a target="_blank" href="https://www.aliexpress.com/item/1305959941.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_8836fcf9d1b12.png"></a></li></ul>&nbsp;<ul><li>12V to 5V step down with micro-usb output connector Select item: Micro USB <a target="_blank" href="https://www.aliexpress.com/item/1005004983394160.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_68139de302446.png"></a></li><li>Audio amplifier board <a target="_blank" href="https://www.aliexpress.com/item/1005006187401293.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_1bbf3fb3261df8.png"></a></li></ul>&nbsp;<ul><li>Zero delay Arcade USB encoder <a target="_blank" href="https://www.aliexpress.com/item/33019816294.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_927dbe52287ed8.png"></a></li></ul>&nbsp;<ul><li>Speaker Line 3.5mm Aux Audio Noise Filter Ground Loop Noise Isolator Recommended filter to eliminate noise generated by the Raspberry Pi itself, placed between the Raspberry Pi and the audio amplifier. <a target="_blank" href="https://www.aliexpress.com/item/1005001604545947.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_fed070810def08.png"></a></li></ul>&nbsp;&nbsp;<ul><li>Subwoofer 3" 25W Select item 4 Ohm 25W Speaker <a target="_blank" href="https://www.aliexpress.com/item/32570614680.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_69bcee0cb8757.png"></a></li></ul>&nbsp;<ul><li>Speakers 30x70 5W <a target="_blank" href="https://www.aliexpress.com/item/4000127737256.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_237fe53d26f22.png"></a></li></ul>&nbsp;<ul><li>Dual USB extension <a target="_blank" href="https://www.aliexpress.com/item/32869652188.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_ba81b6469a7198.png"></a></li><li>Power plug connector with switch fused <a target="_blank" href="https://www.aliexpress.com/item/32880955914.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_62b27496b6b0c8.png"></a></li></ul>&nbsp;&nbsp;&nbsp;Installation software guide:In the following video, you can see how to correctly set up your microSD card with the Batocera environment.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=NOdN5yiUKOE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/NOdN5yiUKOE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;Warning: There is an error in the materials list. The power supply described as "Power supply 12V 3A 36W S-36-12" is incorrect. The correct model for the power supply is "Power supply 12V 2A 24W S-24-12.

Printed mini arcade machine

Arcade 

mercadogarzas

Detroit Lions Classic 3d logo 180mm x 180mm&nbsp;Use with:“V” connector model<a target="_blank" href="https://makerworld.com/en/models/143573#profileId-156082" rel="nofollow noopener">https://makerworld.com/en/models/143573#profileId-156082</a>&nbsp;Chain from “Billrobland"<a target="_blank" href="https://makerworld.com/en/models/25960#profileId-22348" rel="nofollow noopener">https://makerworld.com/en/models/25960#profileId-22348</a>&nbsp;Need about 30 chain links to fit adult male.Split key ring&nbsp;Check out my ACORN link system with Bobbles to make you chain medallion even better<a target="_blank" href="https://makerworld.com/en/models/172187#profileId-189065" rel="nofollow noopener">https://makerworld.com/en/models/172187#profileId-189065</a>&nbsp;&nbsp;models can be shrunken down to 15=14% to make earrings&nbsp;alternate logos will be made later

Detroit Lions Classic 3d logo 180mm series

Football

Crafty Sven

No supports needed. Make sure that the bed is clean and the first layer adheres properly, glue is recommended.&nbsp;Good luck and happy printing ! ^-^&nbsp;I suggest trying the non AMS version 1st to see if you like the design and size. &nbsp;You can scale this up to 150% !

Ancient Guardian Articulated from Zelda 

zelda

tufactoria3d

This is my design of a mechanical heart using the software HUEFORGE. Perfect for a gift or decor your room. Please print at 0.08 layer height. The file also includes the .amf with all the color changes but also here you have the note:&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Gray At layer #9 (0.8mm) swap to Light Gray At layer #14 (1.2mm) swap to White for the rest.&nbsp;

Mechanical Heart HUEFORGE

hueforge 

BODY3D

As you liked my waste eater : <a target="_blank" href="https://makerworld.com/en/models/92332" rel="nofollow noopener">https://makerworld.com/en/models/92332</a>I had the idea of creating another one but this time with Kirby !<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/vaVUMW5bYIc"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=vaVUMW5bYIc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/vaVUMW5bYIc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Since he eats everything, I thought it would be perfect :) It will make a very good waste eater for your A1 or A1 Mini or as a candy container or something else ^^ Very simple to print, no supports required. In total 6 colors, Pink, Dark Pink, Red, Blue, White and Black. And only 1 multicolor print for the eyes :) I hope you enjoy !&nbsp;Happy Printing !&nbsp;All my links : <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener">https://beacons.ai/body3d</a>

Kirby Waste Eater

for ashley 

Cjwelcome

Introducing yet another 2024 glasses pack!😎 These are not your average pair of glasses with 2024 atop their frames. These sick a$$ shades come in a variety from originals, 2024, H-N-Y style and then an interactive Ball Drop style you can wow the party as you count down 3-2-1!!! Roll in the new year with a hot fashion statement or get made fun of in front of the whole party for being a 3D printing nerd😅 Oh Well! Multi color the text as you please for print and be sure to have a safe and Happy New Year celebration! &nbsp;Using a simple lighter, heat the elbow section of the frame arms and then give it a 15°-20° degree bend to fit more comfortably behind your ears.(CAUTION: Use lighter if you are experienced individual aware of flame and hot plastic hazards)

Not Your Average New Years Shades Pack 2024 EDITION

fay3dlab

This is my entry to the flying object competition.. So i have been brainstorming of a design i can make for the competition and i knew i will make a suspended model for it.. But to make it different than my usual suspended model i need to add another element.. that's where the tensegrity comes in.. Tensegrity is basically a model that is floating solely by the tension integrity from the weight of the model itself.. in other words.. the X-wing will look like its floating and only supported by the suspended strings.. Like all my suspended model.. it will be printed in one piece except for the 4 back thruster engine.. that needs to be installed after print.. Once printed.. you need to be very careful when getting it off the bedplate since unlike other suspended model.. this one is held by very little strings.. the wings are held by 10 strings in total..&nbsp;I have also prep the model so that you can easily paint parts for multicolor prints.. <img src="https://makerworld.bblmw.com/makerworld/draft/378390/2023-12-02_24f73bb26f471.png"> I've made the model small in size cause of the weight of the x-wing that the strings will have to bear.. and so that our A1 mini owners can join in the fun of printing this suspended tensegrity modelOne important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended tie adv fighter

Suspended Tensegrity X-Wing

star wars

wuguigui

<h2>Summary</h2>Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now.Updated 20230605I separated the body into 2 parts, now it is available for small printers( print size less than 10X10X10cm)Also, I removed the nostril, because, in the early TV cartoon series, they don't have any nostrils on the face; The front shell and the front body parts have a snap groove now， which can help you to assemble them easily.But I kept the old version, you can download the new version parts with the title "1.1"Updated 20230530Sorry guys, someone has an issue when assembling the part"Part-Shell-Front" to the body, Then I found the part is wrong, and now I reupload the part"Part-Shell-Front", Please download it again.Teenage Mutant Ninja Turtles, the memorial of the Post-80s generation.I designed a model kit version of the four cute turtles, It imitated the frame structure of the model kits, can prevent edge warping during printing, and can also recall the fun of assembling the model kit. Most of the sprues adopt hidden designs.You can try to print it with no support, 0.1 mm layer height is recommended.Follow the "Assembly Instructions" to make it. Watch the video to get more information.You can get the fun from the assembling.Click "Like" if you like it, or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a> thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KjEl-mLZMsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KjEl-mLZMsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Teenage Mutant Ninja Turtles 

model kits

JF-699

Teaching myself how to use Fusion 360. I've always loved the Power Rangers, and wanted to make a Lightbox to show off my appreciation for the rangers. This is my very first project. Please let me know what you think. Bottom hole and back hole for a choice in where the cords go through, or to mount on wall. Print picture will be uploaded soon. &nbsp;I did a very small test print to please the makerworld uploads. I will print the lightbox at a later date with the correct colors.

Power Rangers - Green Ranger - Light Box

Power Rangers

neil3dprints

Please note this was a collab with Bambu Labs.The printer was provided free of charge for this project. Update 27/12/2022.I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also added a small L or R on the left and right side parts to help people distinguish between them for the MOD installation.I've also added step and stl files for blank ‘Round Side Parts’ in case anyone would like to add there own logo to them.Check out Uncle Jessy's build!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Gv7w95ECAoE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Gv7w95ECAoE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is your new best friend!!!The companion cube mod is a must have for any Bambu Lab P1P owner. And any portal fan.This is purely a aesthetic MOD. You do not need to touch the electronics at all!I've provided a detailed assembly guide as a downloadable PDF. Just download this as you download the STL's. And please please please follow the instructions. It's not a complicated build. Allot of it is common sense. But there will be some instructions that would prove useful to follow in a particular order. I also recommend giving it a quick read before you start printing all of the parts.You will also require superglue for this build.I recommend a couple of spools of grey PETG. A couple of white pla. And a small amount of pink pla. Just refer to the sheet below<figure class="table" style="width:462pt;"><table style="border:1px double var(--input-border);"><tbody><tr><td style="border-bottom-color:rgb(191, 191, 191);border-bottom-width:1px;border-left-color:rgb(191, 191, 191);border-left-width:1px;border-right-color:black;border-right-width:1pt;border-style:solid;border-top-color:rgb(191, 191, 191);border-top-width:1px;height:33pt;padding:0.4em;vertical-align:top;width:462pt;" colspan="3">As a reference each 1 KG spool carrys an average of 330 meters</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Totals</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Required Material In Meters ( Approx )</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Grams ( approx )</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">White - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">618.48</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1843.07</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Grey - PETG</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">390.93</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1192.34</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15.75pt;padding:0.4em;vertical-align:top;">Pink - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">47.72</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">142.21</td></tr></tbody></table></figure>All parts are printable on a Bambu Lab P1P.But I did print on the slowest setting on the P1P.If you would like to use an AMS with this MOD, I've been informed you can so with the below additional MODs installed.To sit the AMS unit on top of the printer with the Companion Cube Mod installed.<a target="_blank" href="https://www.printables.com/model/397718-p1p-ams-legs-companion-cube" rel="nofollow noopener">https://www.printables.com/model/397718-p1p-ams-legs-companion-cube</a>To help guide the PFTE tube.<a target="_blank" href="https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket" rel="nofollow noopener">https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket</a> PTFE Tube Y-Splitter. <a target="_blank" href="https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec," rel="nofollow noopener">https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec,</a> this way you can run either AMS or spool.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through Prusa Printers and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Companion Cube P1P Mod ( Bambu Lab )

bambu printer mods

Dingus Dude

To be sure you're always downloading the most up to date file, use my “DD” profiles. See changelog below for detailed updates.&nbsp;BetterBoxPrint In Place Double Storage Customizable Divider Parts BoxNot just for Bambu Lab parts! Makes a great jewelry box, too!&nbsp;This is another version of my Print In Place Hinged Box and part of my BetterBox series!Check out the rest of the lineup below to find the ones that fit your needs!<figure class="table" style="float:left;width:35%;"><table class="ck-table-resized" style="border:2px solid hsl(0, 0%, 100%);"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45645#profileId-47422" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-28_e2af4207409738.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45645#profileId-47422" rel="nofollow noopener">Customizable Dividers</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/22697#profileId-20609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_f53e9d31a992f8.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">Original Bambu Parts Box</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45918#profileId-47727" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_50d65c4b44a158.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45918#profileId-47727" rel="nofollow noopener">Empty Storage Box</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-Now back to the box that you came here for-&nbsp;FEATURES:&nbsp;Print In Place Hinged Box&nbsp;Compartments:<ul><li>Fully customizable! Use all the included dividers or print any of the ones you want plus more. Whatever you want to store, this box can accommodate. Please share how yours is arranged! There are litterally HUNDREDS of variations! Mix and match divider colors to help organize!</li></ul>Flip Top Lid:<ul><li>Allows for double the storage! The Flip Top prints on a separate plate and is super easy to install. When the Flip Top snaps closed it sits tight to the top dividers so even the tiniest screws won't fall out or move to another compartment! In short, your parts STAY where you put them!</li></ul>&nbsp;Flip Top Installation:<figure class="table" style="float:left;width:50%;"><table style="border:2px solid hsl(0, 0%, 100%);"><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-31_5a34a1d06579c.gif"></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"> </td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Box Dimensions175mm length107mm width (not including hinge and latch)61mm height (closed)&nbsp;&nbsp;&nbsp;Of course it's not necessary but if you want to add to my <a target="_blank" href="https://paypal.me/davebarbier?country.x=US&locale.x=en_US" rel="nofollow noopener">beer fund</a> it would be much appreciated! 😄&nbsp;

BetterBox - Flip Top Storage Box

useful 

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

dragons

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

AMS Feeding Funnel Wear Protector!

martin.taichl

This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates.Here you can see a video about the project includin an assembly. Please ignore the colour differences on the model. It needs to be painted anyway ;) <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=3eFA0s0bt1A"><iframe src="https://www.youtube.com/embed/3eFA0s0bt1A" frameborder="0" allowfullscreen=""></iframe></div>&nbsp;Enjoy.Category: Vehicles

Puddle Jumper from Stargate

stargate 

Lilac Rage

<h3>Homer Backing Into the Bushes Meme Christmas Ornament</h3>Back in my day we would look at our memes in only 2 dimensions, which was the style at the time.&nbsp;----------------If you like my stuff, check out my patreon<a target="_blank" href="https://www.patreon.com/LilacRage" rel="nofollow noopener">https://www.patreon.com/LilacRage</a>-------<h3>Instructions:</h3>Print face down on the build plate.Colors used in the print:&nbsp;<ul><li>Bambu Basic Yellow</li><li>Bambu Basic White</li><li>IIIDMax Tan</li><li>Generic PLA Black (Random Amazon Brand)</li></ul>&nbsp;----- Be careful using other print profiles than the one provided. I had to slow down the first layer and tweak a few things in order to get the first layer to adhere well. The individual ‘pixels’ are quite small and unless your filament is dry and well tuned, you may have issues with the first layer. I also HIGHLY recommend using a textured PEI plate for the best surface finish and better adhesion.&nbsp;___________ <a target="_blank" href="https://makerworld.com/en/u/2064416831/collections" rel="nofollow noopener">Check Out The Rest of my Ornaments Here</a> ___________ Post Your Makes in the Comments! &nbsp;

Homer Meme Ornament

simpsons 

3DCrabClawCreations

This is the “Lost In Triangulation Lamp". Makes a great side table lamp with a nice modern look.Easy assembly with click in place parts for easy gluing.Uses a RGB LED strip wrapped around a post inside for lighting.&nbsp;Items to print:3x Front Cover1x Frame3x Feet1x LED Holder&nbsp;USE THE PRINT PROFILES PROVIDED FOR THE FRAME/FRONT COVERS.Happy Printing :)&nbsp;&nbsp;

Lost In Triangulation Lamp

lighting 

toothletmetoday

Get ready for Christmas with this simple Christmas tree fairy light holder. Easy to print. You can use what filament you want. Perfect fit with a cheap 2m/20led fairy light. You can hide the cables and the houseing of the flat battery in the base of the modell. &nbsp;I used this lights from amazon but you can find on aliexpress too. &nbsp;<a target="_blank" href="https://www.amazon.de/-/en/Waterproof-Decorations-Christmas-Weddings-Barbecues/dp/B0BKT562RQ/ref=pd_ci_mcx_mh_mcx_views_0?pd_rd_w=lxeOG&content-id=amzn1.sym.f81e69b0-8d25-4d0a-a0ba-d47e95a31f14%3Aamzn1.symc.ca948091-a64d-450e-86d7-c161ca33337b&pf_rd_p=f81e69b0-8d25-4d0a-a0ba-d47e95a31f14&pf_rd_r=X3T94G9298PNNKHRN3K6&pd_rd_wg=6uAvl&pd_rd_r=e5f120d1-c75a-4aa9-b927-d1b287b68e6c&pd_rd_i=B0BKT562RQ" rel="nofollow noopener">Amazon</a><a target="_blank" href="https://www.aliexpress.com/item/1005005284339594.html?spm=a2g0o.productlist.main.107.15521948KKWWJE&algo_pvid=95e5371c-674f-4829-8a4b-004fb06b3b69&algo_exp_id=95e5371c-674f-4829-8a4b-004fb06b3b69-53&pdp_npi=4%40dis%21USD%211.32%210.81%21%21%211.32%21%21%402101ea8c16982238877861349e3844%2112000032487576233%21sea%21HU%21172681489%21&curPageLogUid=5uesu0qD7LdR" rel="nofollow noopener">Aliexpress</a>&nbsp;If you want to print this modell, you can use my 3mf file. It has the correct orientation and position for the max size. I'll appriciate you if you use the bambu handy for starting your print.&nbsp;As a request, I made a star shape holder too. Maybe if you interested in, you can check it on the link. <a target="_blank" href="https://makerworld.com/hu/models/53070#profileId-54897" rel="nofollow noopener">link</a>&nbsp;--------------------------&nbsp;2023.11.01 edit…&nbsp;Some people requesting that, so I made a version with a bigger base where you can hide 2*AA or 3*AA battery boxes and the unnecessary wire of the light. I have a battery box wich has the switch on the top of the box not on the side, so i made a clearance for this type of boxes too. I made the hook a slightly bigger, so you can mount easily that rope type lights (what you can see on the picture) or you can use a longer light (3m long works very well too) becouse you have more space on the hook to mount the wires. The 3mf file contain the correct and i think the only orientation what you can use to printig in the biggest possible size on a bambulab printer. &nbsp;--------------------------&nbsp;2023.11.03&nbsp;For request i added for the 3*AA battery box the wire channel to the base front and i adjusted the orientation the modell because the X1 users can have issue with the starting routine goes into the modell's first layer.&nbsp;Thanks!

Christmas tree with fairy light

Christmas 

TBone_427120

This lampshade is designed for the <a target="_blank" href="https://makerworld.com/sv/models/13717#profileId-13429" rel="nofollow noopener">Bambu Led Lamp 001</a> kit ←- Follow this link to get the model for the base that holds the electronics and that this globe shade locks into.&nbsp;This is a moon lithophane model for the LED Lamp kit base built using NASA SVS data.&nbsp;Before printing, it is highly recommended to test and calibrate the filaments. Test Prints are provided in a profile to test the trickier parts of the print, in particular the top of the moon. Printing the sliced off moon top will give an idea if the flow rates need to be calibrated or if the layer heights need refining.Both of these are eSun PLA, and both were printed using the same eSun PLA+ profile. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_e7cbdab0e3545.jpg"> The one on the left (&#34;creamy&#34;) needed different flow rate settings to avoid the gaps in the thin walls. Moral of the story: spend the extra 20 minutes to at least run the Auto Calibration for a new filament (and Manual isn&#39;t so bad to do either particularly if you print on the textured plate).&nbsp;The extra big brim is out of an abundance of caution. There is nothing worse than being ten minutes from the end of a 17 hour print and hearing *CRACK* followed by a spaghetti detected notification. If the test print indicates your filament needs a small center support for the top of the moon, “Normal/Snug” supports will work best. Use Manual supports (Auto will result in a ton of exterior supports for the base of the moon) and paint a small dot in the underside of the top of the Moon. The latest version of the model has been made a little thicker and is more forgiving for printing with most filaments. The part that interfaces with the lamp kit base can easily be made a different filament to match the LED holder material or just for variety. Just set the base filament for the “ModifyBaseSettings” modifier. Doing will require only one filament purge, no prime tower is necessary.<figure class="image image_resized" style="width:41.3%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_33ea3c815b5ef8.png"></figure>&nbsp;If using the modifier to make a material change at the base, make sure to pick two filaments that have good adhesion to each other.Because the print requires supports in the base and cleanly removing those supports is important for a snug fit to the lamp kit base, a test print is provided to make sure the filament and support settings will release cleanly. Normal snug supports provided the best results (tree supports required much more effort).&nbsp;<figure class="image image_resized" style="width:17.23%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_f00e2d2199c81.jpg"></figure>&nbsp;If you do use the center support, when removing don&#39;t pull at individual folds from the bottom. Use something to grab on multiple folds as far up as possible (a pair of kitchen tongs works well) and twist.<figure class="image image_resized" style="width:17.52%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_c2509972a68348.jpg"></figure>Twisting will put less stress on the top of the sphere and less risk of pulling away the moon surface. If you have wisps of filaments, resist the urge to use a heat gun because the variable thickness of the shell will contract non-uniformly under the heat. This is the result using a heat gun on a lithophane:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_a27a97fbc55ec.jpg">&nbsp;

Moon Globe for LED Lamp 001

space

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018045/design/4fb50df1-8c36-4d0c-88ec-bcc8e5122b9c.jpg"></figure>___________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________This is a kit card of Minecraft Turtle in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol><h4>Printing Reminders</h4><ul><li>Print as oriented, with NO supports needed.</li><li>If you&#39;re printing in multiple colors, please note that due to several color swaps, it would take longer to print.</li></ul><h4>Difficulty Level (Easy, Medium, Hard)</h4><ul><li>Printing: Medium - Bed should be leveled well to ensure small parts stick well to the build plate. Requires printing slower during the first few layers. May require lots of filament swaps if printed in multi-color.</li><li>Assembly: Easy - Parts should fit really easy. The flippers are intentionally designed to be loose and wiggly. See pictures for correct orientation of the flippers.</li></ul>

Minecraft-inspired Turtle Mini Figure Kit/Keychain

keychains

jajaum3d

🌟 Support My Work & Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more. See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files. Santa Claus and Mrs Claus Candle holder. For LED candles only No glue or extra parts needed, just print and play.<h4>Printing</h4>All files in STL to print without any support. The files are already in the best orientation to print and can be printed with your standard 0.2mm layer config. In the pictures, they were printed using 3 walls and the new lightning infill. There is a single color piece of them too. See the pictures for assembling instructions, but it's really straight forward.<h4>Tip</h4>Print the buckle and the connectors together, they are small and printing together will give time for them to cool down properly while printing. 😎

Santa and Mrs Claus candle holder

BuildyBryce

A fidget toy designed to resemble the Bambu Lab AMS.&nbsp;Each filament spool ratchets and makes a satisfying sound when spun!&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-10-17_7116972d255e.gif"></figure><h2>Try Out My Other Fidget Toys!</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/61927#profileId-64376" rel="nofollow noopener">Filament Fidget</a></li><li><a target="_blank" href="https://makerworld.com/en/models/62596#profileId-65217" rel="nofollow noopener">AMS Keyring Fidget</a></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-11-12_b34757f51518f.jpg"></figure><h2>Assembly Instructions</h2>Step 1: Cut a 60mm length of 1.75mm filament.<figure class="image image_resized" style="width:66.3%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-10-17_a548fc97a5865.jpg"></figure>&nbsp;Step 2: Attach the lid and base of the AMS together using the 60mm filament as a hinge.If the filament doesn&#39;t fit, ensure there is no support material in the hinge. If it still doesn&#39;t fit, adjust your print settings and try again (or use a drill/lighter).<figure class="image image_resized" style="width:66.02%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-10-17_4b2d515b33dea.jpg"></figure>&nbsp;Step 3: Assemble the 4 filament spools.The 2 halves should snap together firmly without glue.<figure class="image image_resized" style="width:66.11%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-10-17_6f3b91703aaf7.jpg"></figure>&nbsp;Step 4: Put the spools into the AMS and use the square bar to lock them into place.<figure class="image image_resized" style="width:66.05%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-10-17_056db6aadbe33.jpg"></figure>&nbsp;Step 5: You&#39;re done!If the filament spools don&#39;t rotate properly. Ensure that the ratchet piece is facing the correct direction, or flip the spools around.<figure class="image image_resized" style="width:66.11%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000043249/design/2023-10-17_4ca1d03ef553d.jpg"></figure>&nbsp;

AMS Fidget Toy

fidgets

Whopper Printing

This fun model is print-in-place and prints entirely without support and folds together right off the build plate. No assembly!&nbsp;This model is designed to fit small LED tealights inside (but you can change the source of light to anything you want)! Optionally, I've designed an insert that when lit from the back, takes the design to another level!&nbsp;The wheels are locked to the body of the model during printing in order to ensure nothing comes off the print bed during printing, but can be broken free and rotated after printing.&nbsp;If you would like to support me, consider these options:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Printer Poop Projects

Commercial Use Ok

beach

office

croc

kit card

Pokemon

to print

games

movable

coasters

Camping

business

Arcade

Football

zelda

hueforge

for ashley

NYE

star wars

model kits

Power Rangers

bambu printer mods

useful

dragons

AMS

stargate

simpsons

lighting

Christmas

space

keychains

Christmas

fidgets

Halloween