Criativa 3d Print

giamma933

FILE IS READY TO PRINT&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA ERYONE MANGO Yellow Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to RedAt layer #13 (1.12mm) swap to MANGO YellowAt layer #16 (1.36mm) swap to Jade White for the rest.&nbsp;&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up. If u want to support my work <a target="_blank" href="https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT" rel="nofollow noopener">https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT</a>&nbsp;For request send me dm

LUFFY ONE PIECE HUE FORGE INSANE

massa

curtalexis821

At 380% would be around the actual size of it.Build your own armory 1/4 scale AWM L115A3 Sniper Rifle mock-up model

AWM L115A3 Sniper Rifle 1/4 Scale

uteis

Maty505

As always, this model is prescaled and i do not recommend scaling down unless you use a 0,2mm nozzle. The full size scorpion is about 30 grams. I have printed mine from copper silk pla+ on stock ender 3 with 0,4mm nozzle and it turned out great. The orange one was a bit scaled down  and printed from prusament petg, that one didnt tun out that great but i think thats my mistake as i was printing petg for first time. Im also working on another version that will be suitable for even smaller prints taht will be released in a few days.

massa

top

uteis

Animais