Crazyb1

KYZ Design

8 sizes of display shelves for your Honeycomb Storage Wall.&nbsp;The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it&#39;s probably not a good idea to use low stiffness filaments such as PETG. I made mine from ASA and PETG-CF in-case they need to go in the sun on a hot day.&nbsp;Otherwise it&#39;s pretty self explanatory :)&nbsp;You are welcome to add print profiles (and keep the points) and make remixes too.&nbsp;Enjoy!&nbsp;If you would like to say thanks, you could buy me a few metres of plastic on <a target="_blank" href="https://ko-fi.com/kyzdesign" rel="nofollow noopener">Ko-Fi</a> otherwise, please post a make and check out my other HSW models in <a target="_blank" href="https://makerworld.com/@KYZDesign/collections/18964" rel="nofollow noopener">this collection</a>.

KYZ HSW Round Shelves - 8 Sizes

stand vanzare

craciun

Lemurensohn

The Mewtwo 120mm PC Fan Cover is an enchanting decorative accessory specifically designed for 120mm PC fans. Featuring the iconic Mewtwo logo, it adds a playful touch to your computer setup.Features:Size: Fits 120mm PC fans.Design: The striking Mewtwo logo provides a unique aesthetic.Material: Made from lightweight and durable PETG, ensuring a high-quality finish and easy installation.Compatibility: Fits most standard 120mm PC fan models.Note: The Mewtwo 120mm PC Fan Cover is a purely decorative item and does not provide additional protection for the fan. Perfect for Pokémon fans and those looking to add a personal touch to their PC. It is intended for private use only and may not be edited or redistributed. Simply download, install, and enjoy the playful look of Mewtwo!

Mewtwo 120mm PC Fan Cover -Playful Decorative Look

calculator

StriK3FoRC3

<h3>This is a Remix, the Original: <a target="_blank" href="https://www.thingiverse.com/thing:4538594" rel="nofollow noopener">https://www.thingiverse.com/thing:4538594</a></h3>&nbsp;&nbsp;<blockquote> I want to apologize for my bad English in advance, I&#39;m not good at writing so much and that&#39;s what mainly keeps me from releasing new stuff</blockquote>if you need a video on how to assemble everything, the original creator has made a couple of videos about it!&nbsp;i completely recreated the Sanlaki VR Gunstock in fusion 360 because there weren&#39;t any easy to modify files that i could find.The main reason was because i wanted to use normal ½&#34; pipes from the hardware store.  in the end i had so much fun recreating it that I also made a custom version for myself, both versions are included in the downloads, one Version is the original vr Gunstock that I recreated as close as possible with some minor tweaks to for better Pritability and to fit normal ½&#34; pipes. (if you have the pipes he suggested you should print his files)And the other version is my custom design I also recreated the controller mounts, I used a 3d scan of the original quest 2 controllers, the 3d printed part is a perfect fit without any movement!Everything is already Oriented correctly, There are no Supports needed EXCEPT for the “Front controller Rotation blocker”  (work in progress) ||DISCONTINUED|| currently working on an adjustable stock and shoulder rest, will add it after some more testing. no original part will be edited you can just print is as an addon in the future! Update v1.1: 17.9.22 Added two more spacers to my design, one for the coupler and one for the controller mounts. Made the controller mount spacers because i noticed it wore out and had a 0.8mm wiggle room. As with the other spacers, resize them in your slicer till they fit just perfect. Info to my Remixed Gunstock:Pipes<ul><li>You need 3 Pipes in total!</li><li>The Pipes i used are Metric in length (200mm and 120mm) and ½ inch in thickness if you have different ones that are slightly longer it may still work, you can edit everything with the included step files.</li><li>I also made some optional printable pipes for the stock because a metal pipe isn&#39;t needed there. I included two versions and sizes, i Recommend people that are taller than 1,80m to print the 250mm version. If you are worried about instability when printing this tall, you should print the one with included supports. Also check if your printer can print this high (that&#39;s how i found out my printer hight wasn&#39;t configured properly in the firmware) I also recommend printing the pipe hotter for better layer adhesion (i used PLA and Printed it with 225c).</li></ul>Muzzle<ul><li>Added a hex shape for better grip, the muzzle is necessary when using one of the “Front controller Rotation blocker”, that&#39;s what holds it in place</li></ul>Spacers<ul><li>There are some spacers included, if you have a silicon protector for your controllers you may need them, you can resize the thickness in your slicer.</li><li>“Spacer for stock rotation” is there, so you don&#39;t overtighten the Optional 3D Printed Pipe. You need it if the stock is to loose or to tight when trying to get it straight. Print spacers in different thicknesses (change thickness in your slicer) until it sits perfect.</li></ul>Couplers<ul><li>There are two versions of the coupler, i Recommend to print the one without sling holes. When you screw everything together, only make it as tight as it has to be till the sides line up with the barrel piece.</li></ul>“Front controller Rotation blocker”<ul><li>Is the only part that needs supports on the bottom.</li><li>The part itself is not necessarily needed, but it feels better if the front controller can&#39;t rotate around the pipe.</li></ul>Sling and Sling Mounts<ul><li>I made my Sling completely DIY, wasn&#39;t really that hard, just some sewing. I used 25mm wide “PP Webbing Strap” or whatever it is called, had that lying around because i once ordered 50m of it for 13€ all 3D Printable Parts from the sling are also included.</li><li>To mount the sling, use some Velcro cable ties, they should be 12mm wide.</li><li>The mounting points are explained in a picture above, everything other that the Recommended places are causing tracking issues, you can of course still try it for yourself.</li></ul>Buttstock<ul><li>i Edited the original a bit so its a couple of mm further down</li><li>i didn&#39;t like how it was just sliding around on my shoulder so i made a optional shoulder rest that you can screw on the back of the buttstock</li></ul>New Controller Mounts<ul><li>I completely remade the Controller Mounts, they are much smoother now and fit perfectly on the quest 2 controllers. Yeah, they are a bit hard to remove, but you can just let them installed when playing other games, you won&#39;t even notice them!</li></ul>I hope i didn&#39;t forget to mention anything, if you have any problems or questions write a comment here or contact me on Discord: StriK3FoRC3#9233 You can also Join my <a target="_blank" href="https://discord.gg/Fhm6XFVCZN" rel="nofollow noopener">Discord Server</a> Parts list (DE Amazon):(Depends on your Configuration, two pipes have to be metal and one can be 3D Printed.)<ul><li>1-3x <a target="_blank" href="https://www.amazon.de/gp/product/B00HYXWH0W/" rel="nofollow noopener">200mm ½ inch Pipe</a></li><li>0-1x <a target="_blank" href="https://www.amazon.de/gp/product/B000VT7HZ6/" rel="nofollow noopener">120mm ½ inch Pipe</a></li><li>2x <a target="_blank" href="https://www.amazon.de/gp/product/B08JC9SCRT/" rel="nofollow noopener">32mm x 6mm 95lbs/43kg Magnets</a> The magnets are the most expensive part, you don&#39;t need to buy the ones in the link above. Maybe you find them cheaper, just the Dimensions are important.</li><li>(Optional) <a target="_blank" href="https://www.amazon.de/gp/product/B07K2DSFY7" rel="nofollow noopener">25mm wide Webbing Strap for DIY Sling</a></li><li>(Optional) <a target="_blank" href="https://www.amazon.de/-/en/gp/product/B0839B49FB/" rel="nofollow noopener">Velcro cable Ties</a></li></ul>That&#39;s it, not much i know. My Gunstock contains out of 1x 120mm metal pipe, 1x 200mm metal pipe, one 250mm 3D Printed pipe and two magnets, all the other stuff is 3D Printed! The final cost of my Gunstock was just about 10€ Incliding print material. i printed not just one, two of my friends also wanted one. Ask your friends too, so you can split the cost of the magnets :)  <a target="_blank" href="https://www.paypal.me/StriK3FoRC3Creator" rel="nofollow noopener">Donate if you want, need more Filament for other Projects/Prototypes ;)</a> if you Have any Problems Contact me on Discord: StriK3FoRC3#0001 You can also Join my <a target="_blank" href="https://discord.gg/Fhm6XFVCZN" rel="nofollow noopener">Discord Server</a>

VR Gunstock For Quest 2 (Sanlaki remix)

Deltaprints

A cactus plant pot with two levels in an octagon design.

Octagonal Cacti Planter "Double-Decker"

plante

Ziggy

Customizable Heart Ring HolderWhether newlyweds or long-time lovers, this decorative ring holder is the perfect display for your wedding bands. Simply customize the text on the “blank heart” model for any couple in your life! &nbsp;Designed to be standing 75-degree angle, the rings rest on a slight ramp allowing gravity to hold the rings in place. &nbsp;If you want to support me or get a commercial license to sell this product, please join my Patreon membership:<a target="_blank" href="https://www.patreon.com/ZiggyZigDesigns" rel="nofollow noopener">www.patreon.com/ZiggyZigDesigns</a>

Customizable Couples Heart Ring Holder

nunta

Fidget

planes01

<h3>Model</h3><h3>Overview</h3>SR-71 kit card that was created to showcase a true aviation engineering marvel and is an inspiration for kids and adults of all ages in pursuit of science, technology, engineering, and math (STEM). This particular model uses color and sliced 3D format to really bring a highly contoured airplane to life upon assembly. The kit format is great for gifting the model to engineering clubs, friends, family, or coworkers that enjoy building and showcasing aviation engineering history. The kit includes a stand that is assembled to display the model.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<h3>Profiles</h3><ul><li>Small Kit with Frame<ul><li>small plane kit with frame ideal for gifting to others</li></ul></li><li>Large Kit with Frame<ul><li>large plane kit with frame ideal for gifting to others</li></ul></li><li>Small Model Pieces<ul><li>small plane without frame ideal for assembly right off the printer</li></ul></li><li>Large Model Pieces<ul><li>large plane without frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown:<ul><li>Bambu Lab PLA Black</li><li>Overture PLA Cement Gray</li><li>Overture PLA Space Gray</li><li>Esun PLA+ Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connector between engine halves<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_81f8b94fa9812.jpg"></li></ul></li><li>Press engine halves together<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_499c3e2a6c543.jpg"></li></ul></li><li>Insert engine into fuselage (snaps together). Note LHS &amp; RHS engine positions below!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_5e37007ed5a03.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_2572f2daa805a.jpg"></li></ul></li><li>Insert outboard wing into engine (snaps together)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_582fe33443f7.jpg"></li></ul></li><li>Insert vertical tail into engine (snaps together; recommend to insert aft end of vertical tail first and then press down on forward end)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_02853c5841433.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-25_3244aa356b7fb.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;<h3> FAQ</h3><ul><li>How do you make the airplane kit card models?<ul><li>Fusion 360! All of my models are created by me in a CAD environment. I love to design &amp; print my creations!</li><li>Here is a view of this SR-71 model showing sketches &amp; bodies!</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-03-05_8bcb3d1b0e6e1.png"></li></ul></li><li>How can I learn how to make kit card?<ul><li>Learn the tools &amp; keep exploring! (YouTube is a great starting place)</li><li>The basic steps:<ul><li>Create sketch for each of the major components: wing, fuselage, vertical tail, joints, etc..</li><li>Create solid bodies using those sketches (extrusions, lofts, etc…)</li><li>Add any details like blends, fillets, chamfers</li><li>Create the stand over the center-of-gravity (note the maker point on the image above!)</li><li>Fine tune tolerances in the joint (here is where a lot of 3D printing prototyping comes into play!)<ul><li>Fun Fact: This SR-71 had 6 prototypes before publishing to the community</li></ul></li><li>Add kit frame</li></ul></li></ul></li></ul>

SR71 Kit Card

Avioane

T.giovanzana

New pen/tools holder for your desk!&nbsp;Glue the grenade to the stand for a better stability or it may fall down (it depends to the pen or tools you put inside)&nbsp;I recomend to print the grenade in military green as my pics.Choose the stand you prefer, single or multi color.&nbsp;You may also like:<a target="_blank" href="https://makerworld.com/en/models/490558" rel="nofollow noopener"></a> <a target="_blank" href="https://makerworld.com/en/models/419407" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458424/design/2024-04-24_ba5e02b80ac75.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/434889" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458424/design/2024-04-24_ec655a8400992.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/423547" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458424/design/2024-04-24_9c2b130036c3.webp"></a>

Grenade MK2 pen/tools holder with stand

Arme

Bam!

Works with first layer detectionNo interference with stock plate, I only have one 3rd party plate (IdeaFormer PET Carbon pattern plate) works fine as well.&nbsp;Use PETG ASA ABS to print ( material that can withstand high temp)&nbsp;1.Remove the original wiper2.Cut an A1 silicone wiper in half or 6 rows and install it on top of the new wiper holder3.Remove the purge chute screws4.put the printed part in5.screw the 2 screws back into place6. Make sure the front(the side with silicon wiper) of the printed part sits flat on the front lip of the purge chute&nbsp;&nbsp;I noticed that after printing is completed, the nozzle parked on the right edge of the wiper during filament retracting. You can avoid this by changing one line in the end G code(see picture 3). By doing so nozzle will park a little bit to the right. This is optional use at your own risk.

X/P Poop Chute Nozzle Wiper Mod 

imprimanta

ghostchili3d

A simple and fun way to hold toothpicks.

Cactus Toothpick Holder

Bucatarie

RTX_Nitrox

Discover the craftsmanship of our 3D-printed Glock 19 replica, an ideal accessory for enthusiasts, collectors, or anyone seeking a realistic firearm alternative for everyday use.

Glock 19 gen 5 v2 with slide

Arme + Accesorii

Muunk Studio

This is a Tesla Cybertruck Kit Card designed by Muunk StudioThe Kit Card took advantage of Tesla Cybertruck's paperfolded-like exterior design, and it is printed flat, folded to an angle, and assembled. It allows to have no layer line and smooth surface finish on most of the parts.   There are three 3mf. files uploaded:<ul><li>Single Color Kit Card - has all parts included and only prints in single filament  </li><li>[Part 1] 2 Color Filament - printed in two different color filament and does not have all parts included. Must Print [Part 2]</li><li>[Part 2] Platform Part - prints in single filament color and must have [Part 1] printed to complete the assemble.</li></ul> Pre-folding along the scored line of surface helps when assembling.Please be careful when assembling, as fitting channels are small and fragile. Every parts should snap fit, EXCEPT for the Window detail. Window is not a snap fit, you have to use glue for window.&nbsp;Please follow the instruction below, for any question shoot me a message or comment below.And as always thank you and enjoy.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_ba3f8a4c42c9b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_2fd546df155e3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_cac77df71344a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_278a4f85300c2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_f45d1e3220b5d.jpg"></figure>

Tesla Cybertruck Kit Card_Designed by Muunk Studio

masini

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Pokemon

Manatee3D

Statue of a Helldiver from Helldivers 2 found in the game files. Art done by the art team for Helldivers 2. I simply converted the file into a printable object.

HellDivers 2 Statue

Helldivers

Tommy Gun

This is a remix of the amazing design from <a target="_blank" href="https://makerworld.com/en/u/182631518" rel="nofollow noopener">laisch</a> Please give him a follow and check his stuff out !!!&nbsp;I only made this remix to have a longer handle for my bigger hands and to have place to put a small hole and be able to hang this beast !!&nbsp;Enjoy people with bigger hands will understand lol also gives a little longer reach, not that it change anything but for my preference.&nbsp;Thanks for rating and make sure to go and follow Laish !!! https://makerworld.com/en/u/182631518&nbsp;Cut two pieces roughly about 10x20x20mm and press them into the spongeholder.&nbsp;For the pullback mechanism you can either print the provided spring in TPU, or use small hair rubberbands. The spring also works in PETG but looses its strength from time to time&nbsp;

Carbon Fiber bigger hands Rod Cleaning tool

Imprimanta 3d util

SirPrintAlot

V-buck based on the Fortnite design, there are print profiles for 3 color or single color.

Fortnite V-buck

Fortnite

Langa__

Changed the size a bit...didn&#39;t hold on to the back (maybe you still need to help with a drop of glue,2 out of 12 didn&#39;t work for me) and is now a little thicker and therefore easier to remove from the print bed&nbsp;&nbsp;

Dummy 13 Angel Wings

Dummy 13

Lotus

100% Customizable Car Plate Keychain, add your own plate number effortless.&nbsp;Open the print profile using Bambu Studio, find the EDIT ME object and edit the text, font family and size easily.

Car Plate Keychain - Customizable in Bambu Studio

Masina

fay3dlab

This is the new ship for my suspended star wars collections..This time its the Tie Interceptor.. I fully modelled everything using Tinkercad..<figure class="image image_resized" style="width:53.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735962/2024-03-20_31a58700f3377.png"></figure><figure class="image image_resized" style="width:58.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735962/2024-03-20_851afb31ec719.png"></figure>In order to print the ship vertically.. i had to modify the back thrusters and extend it to lay flat with the wings.. &nbsp;For the frame.. I thought this time im going to make a minimal frame for the ship so the tie interceptor details can be seen from any angles..The LED strips channel also is simple to install.. nothing fancy needed.. just insert the the LED strips to size and you're done..i used the new bluetooth LED strip for the lights.. it looked amazing.. There were more animation options when you use the bluetooth controller.. i connected it to my phone and it had a ton of color combination and animation options..<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/735962/2024-03-20_9926bdc1cb3fc.gif"></figure>If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light <a target="_blank" href="https://s.click.aliexpress.com/e/_oEk0hDa" rel="nofollow noopener">https://s.click.aliexpress.com/e/_oEk0hDa</a>&nbsp;As always i also prepped the 3mf files for multicolor prints as well.. and remember when printing suspended models.. set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..&nbsp;I hope you guys have fun printing this new version of the suspended ornithopter<figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Tie Interceptor

Lampi

angrelou

Hello everyone, thank you so much for the support I received on the previous design.As a token of appreciation and to enhance your set, I created this design featuring Darth Vader&#39;s ship from Star Wars.The ship is designed to be as close to the original as possible.When you paint it, I&#39;ve added an Easter egg (I hope you find it, if not, send me a message).1.- Remember to calibrate the bed before making this design. 2.- It is designed to use a bit of force and not require glue.If you liked the design, check out my profile and subscribe, you won&#39;t regret it.&nbsp;UPDATE 05/11/2024I uploaded a new star wars ship design, which is the tie interceptor TAKE A LOOK <img class="image_resized" style="width: 33.83%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000223450/design/2024-05-11_3d019ad8ab1ff.jpg">&nbsp;

Darth Vader Tie Advanced X1 Kit Card

Kit Card

NagyBig

The pack was meant for decorative purposes.&nbsp;All parts are interchangeable, insert core and glue it.&nbsp;Original upload date: 2023 Dec. 14Updated Jan. 11, Core pieces.

Kunai pack

Cutite

Bolt3DDesign

"A sleek, 3D printed Karambit knife featuring a curved blade with a futuristic, geometric handle. Its intricate design showcases the precision of 3D printing technology, highlighting the marriage of traditional weapon aesthetics with modern manufacturing techniques."&nbsp;Custom Karambit KnifePause at a certain height to change the color&nbsp;*UPDATESorry new to MakerWorld but you will need:2-M4 18mm or 16mm Screws2-M4 Nuts

KARAMBIT TRAINERS CUSTOM

Kids

Ladamtla

This is a Cat head with tail light switch design&nbsp;Single color, EU/US version

Cat head with tail light switch design

Cats

BT3D printing

Fortnite logo multicolor keychain 3mf file for Bambulab printers with AMS. Already colored in Bambu studio, facing down to the buildplate.For commercial license please join my patreon:<a target="_blank" href="https://www.patreon.com/BT3DDeusCat" rel="nofollow noopener">patreon.com/BT3DDeusCat</a>

Fortnite keychain

brelocuri

kevr102

Another Drill Dust Collector, this is bigger than the previous 2 collectors I have Printed.This can be printed as shown in the Print Preview Screen Shot it just fits on one plateTo assemble, push the handle into the 2 slots on the Top piece and glue, these are a tight fit, then align the top assembly to the bottom, ensure it fits correctly, apply some glue to the edges and hold the 2 components together with elastic bands or similar until the glue sets.The drill hole has align target points to assist with drilling and the hole also has a chamfer to deflect the majority of the debris into the catch area.These are a very useful addition to the tool cupboard.Thanks for Looking.

Drill Mate Dust Collector

Makers Manifest

This is a cool Love sign with a spinning heart! This is a print in place model that required no supports and it spins really well too!&nbsp;Happy valentines day!

Love sign with spinning heart for valentines day

love

FLOWERS GEAR

“OFFICE” Post-it note Box / OFFICE便利贴盒

office

MICHAL_3Dtisk

VALENTINE ROSE with Stem "I LOVE YOU" 

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

flexi

WC Funny Sign&nbsp;I applied double sided tape to the back of the model. Model printed face down

WC Toilet Funny Sign

Funny

mail.iou

Collapsing Katana 天鎖斬月 (BLEACH -Tensa Zangetsu)This is a telescopic sword inspired by the sword "天鎖斬月" used by Kurosaki Ichigo in the Japanese manga "BLEACH". This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts. The handle is capped to facilitate future maintenance and blade replacement.However, the disadvantage of this is that the printing time will increase. If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini: https://makerworld.com/en/models/114630&nbsp;Notice It is recommended to use PLA+、PETG for printing. If your filament has insufficient strength, please increase the fill overlap to more than 40%.&nbsp;Assembly instructions: 1. Place the blades in order.2. Close the handle cover.<img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-03-09_3962f81c0b1a2.png">&nbsp;3. Insert two pins to secure.<figure class="table"><table><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-03-09_49b8dafec3343.png"></td><td><img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-03-09_d90619ba279ab.png"></td></tr></tbody></table></figure>&nbsp;4. fixation of chains Glue is required to secure the chain to the cover of the handle.<img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-03-09_851405b7d869e.png">&nbsp;Remark: 1. If the pin is too loose, you can apply removable glue, such as Styrofoam, to the tip of the latch to facilitate removal during future repairs. 2. Since the flow rate of each brand of filament will vary, the pin may be too thick or too thin. If you encounter this problem, you can adjust the Z height of the pin and print the two pin parts separately. 3. If it is difficult to align the exit hole when the pin is inserted into the tool holder, you can use a blade to push in the direction of the hole to facilitate alignment of the exit hole.<figure class="table"><table><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-02-24_383d366365265.png"></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-02-24_08d21962ae4eb.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669172/2024-02-24_4f45d2e261b7f.png"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;

Collapsing Katana 天鎖斬月 (BLEACH -Tensa Zangetsu)

Sabii

DPJRodrigues

Introducing the Magic Finger Guillotine Trick - a sleek and simple 3D-printable design that replicates the classic finger guillotine illusion. These files allows you to easily print and assemble your own finger guillotine, ready to amaze audiences with its captivating illusion. Download now and add a touch of mystery to your magic repertoire.&nbsp;Tolerances are very important for a sleek assembly. I didn&#39;t use any glue since it was all snap on.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/PTIPii9JvtE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/PTIPii9JvtE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Assembly instructions:<figure class="media"><div data-oembed-url="https://youtu.be/--fE99wdV3M"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/--fE99wdV3M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;╭─━━━━━━━━━━━━━━━━━━━━─╮ Buy me a ☕️ or a 🍺 <a target="_blank" href="https://www.buymeacoffee.com/dpjrodrigues" rel="nofollow noopener">https://www.buymeacoffee.com/dpjrodrigues</a> ╰─━━━━━━━━━━━━━━━━━━━━─╯Checkout as well some of my other designs<figure class="image image_resized" style="width:70%;"><a href="https://makerworld.com/@dpjrodrigues/collections/1121520" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000230117/design/2024-04-23_aefa99af589f2.png"></a><figcaption><a target="_blank" href="https://makerworld.com/@dpjrodrigues/collections/1121520" rel="nofollow noopener">https://makerworld.com/@dpjrodrigues/collections/1121520</a></figcaption></figure><figure class="image image_resized" style="width:70%;"><a href="https://makerworld.com/en/models/204911" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000230117/design/2024-03-08_61dc2e040488e.gif"></a><figcaption><a target="_blank" href="https://makerworld.com/en/models/204911" rel="nofollow noopener">https://makerworld.com/en/models/204911</a></figcaption></figure>

stand vanzare

craciun

calculator

vr

plante

nunta

Fidget

Avioane

Arme

imprimanta

Bucatarie

Arme + Accesorii

masini

Pokemon

Helldivers

Imprimanta 3d util

Fortnite

Dummy 13

Masina

Lampi

Kit Card

Cutite

Kids

Cats

brelocuri

Tags

love

office

love

flexi

Funny

Sabii

Magic