CraftyEnelrad

Martin Kozak

Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars!&nbsp;Printing:<ul><li>Depending on the challenge difficulty, you'll need to print up to 4 trucks and 12 small cars. One of the small cars (preferably convertible one) must be printed in red.</li><li>Parking lot can be printed using different colors to highlight lanes and arrows:<ul><li>Option A - use filament color change in a layer. From 0 to 3.8 mm white color, from 4 all the way to the top grey color.</li><li>Option B - use provided 3mf file and AMS.</li></ul></li><li>Asphalt is as separated model for better visual.</li><li>0.2 mm layer height.</li><li>No supports needed.</li></ul>Other hardware and assembly:<ul><li>Besides filament, you'll also need 72 pcs of cylindrical neodymium magnets 5x1 mm (diameter x height). It is not mandatory, but it's much more comfortable to play with magnetic cars. Use superglue to attach magnets to place.</li><li>New travel friendly design - lid now serves as a stand too and is held in place (in both closed and opened state) using 8 pcs of 8x3 neodymium magnets.</li><li>Pieces of filament to connect hinges with lid and parking lot.</li></ul>You can generate challenges using online generator, for example <a target="_blank" href="https://www.thinkfun.com/internal/rush-hour-challenge-generator/" rel="nofollow noopener">here</a>. I attached several example challenges.

Rush hour - logical game with cars

Toys

Chipped Builds

Button Coasters! These coasters are whimsical and cute and they look best in glitter filaments. I mostly used protopasta filaments for these.Blue Filament- https://amzn.to/34VdItkPurple Filament- https://amzn.to/34Mq72UPink Filament- https://amzn.to/2EQ3HDkGold Filament- https://amzn.to/39bTwGWMint Green Filament- https://amzn.to/2Mr4gYu<figure class="media"></figure><h3>Print Settings</h3>Printer Brand:CrealityPrinter: <div>Ender 3</div>Rafts:NoSupports: <div>No</div>Resolution:.2Infill: <div>10</div>Filament:Proto Pasta PLACategory: Kitchen & Dining

Button Coaters

Sewing

JamesThePrinter

Add storage to you marble run - Holds up to 10 marbles.Simply remove the knob as pictured. Slide the holder over the threads while ensuring the back edge fits under the gear - If you slide the back edge under the gear at a 45 degree angle, there is no need to remove the gear for this step.Once properly seated, reinstall the knob.&nbsp;Print SettingsSupports required&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the pictures above: <ul><li>Bambu Lab Matte Marine Blue</li><li>Inland Lulz Green PLA</li></ul>

Marble Holder - Bambu Lab Marble Run

BL Kits

A pair of travel battery cases to hold either 4 AA or 6 AAA batteries. These cases do not use traditional threads. Instead, I have used a 6-start short thread for faster opening and closing.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Prusament Galaxy Silver PLA</li><li>Hatchbox Gold PETG</li></ul>&nbsp;

Travel Battery Case

jamestheprinter

Rocco's Stuff

This is a container with a twist-top mechanical iris opening mechanism. The project requires (10) 5mmx16mm metal dowels, which can be purchased on Amazon. Glue is required - I recommend JB weld. See my Youtube page for an assembly video.<a href="https://youtube.com/shorts/Pkz72YNvrwk?feature=share" rel="nofollow">https://youtube.com/shorts/Pkz72YNvrwk?feature=share</a>NOTE: Video shows process after metal dowels have been glued into pieces “FRAME-TOP” and “INNER RING”

Mechanical Iris Container

VRsculpts

UPDATE:  I have made improvements to my custom-made crochet texture and a higher resolution version of this duck is now available on my Patreon :)  Comparision of old (left side) vs. new texture (right side): <img src="https://makerworld.bblmw.com/makerworld/draft/479856/2024-02-01_64cc4b0c2705c.jpg">&nbsp;A cute knitted/crochet duck! Requires support due to the texture. I have printed them at 100%, 50%, and 15% as shown in the images. Print profile provided is at 50% which is around 2 inches tall standard issue duck.&nbsp;Separated STL's and a Bambu print profile has now been added for printing without an AMS!  Just print the body, duck bill, and eyes separately in the appropriate colors and super glue them together.  Body still will need to be printed with supports, eyes and bill print with no support but will need a brim.&nbsp;Please follow me on Makerworld and if you really enjoy my makes, consider joining my Patreon and support a fellow 3d printing hobbyist! <a target="_blank" href="https://www.patreon.com/VRsculpts" rel="nofollow noopener">https://www.patreon.com/VRsculpts</a> Patreon access also gives you commercial rights to sell any of my designs (free & paid)!

Crochet Ducky

Holiday

make 3D

- Coffee mug/drink can holder -&nbsp;I was tired of always having to be carefull to not spill my office, as I don't have much room on my desk.Therefore I designed this mug/can holder so I can keep my drinks safe!&nbsp;This is a fully 3D printed mug/can holder for most desk thicknesses. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.   I designed the holder so it can be printed without any support material. This way there should be no sides with lower quality finish. Resulting in a very nice print.&nbsp;If you don't have a AMS unit, the main body can be printed in on solid color and the screw an any other.&nbsp;The holder is designed to hold the most common size coffee mugs, drinking glasses and beverage cans.(Not tested with slim cans like Red Bull)&nbsp;<ul><li>The maximum diameter of a coffee mug is approximately 85 mm (The holder has a cutout for mugs with handles.)  </li><li>The maximum diameter of regular can is approximately 66 mm  </li><li>The holder fits any tabletop thickness between 15mm and 30 mm</li></ul>&nbsp;<figure class="image image_resized" style="width:72.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417767/2024-01-15_fe5501b980aad.png"></figure>Assembly is pretty straight forward.The two large parts are joined with a 90 degree twist lock. Please be aware that the twist lock might seem tight if your printer is not well calibrated or if you are using low quality filament with poor tolerances.&nbsp;Please have a look at the short video showing how to assembly if you are in doubt.<figure class="media"><div data-oembed-url="https://youtu.be/9RAvPbI11C0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9RAvPbI11C0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I have made two versions with different qoutes on top:“More Espresso Less Depresso” and “Drink Responsibly” If you do not want any text on top, simply re-color the part within Bambu Studio to be one solid color.<figure class="image image_resized" style="width:70.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417767/2024-01-15_9446cf9a2ade.jpg"></figure>&nbsp;My holders are printed with these filaments:Bambu Lab PLA Matte IvorySunlu PLA+ BlackBambu Lab PLA Basic OrangeBambu Lab PLA Basic Bambu GreenBambu Lab PLA Matte Yellow&nbsp;LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;<h4>Updated 17-01-2024: Added Print Profile V1.1 Increased the span of the opening to allow tapletops down to 10mm thickness.</h4>

"More Espresso, Less Depresso" Office desk mug holder

Download

DeMeshe Node

Couldn't get the original version of the airtag holder to print properly in a format that had a strong bond in the arms, so compeltely re-modeled it to print with layerlines to keep the part strong. Make sure to print on it's end, you'll need support enabled to do this - but you'll get a much stronger part that is less likely to break. Works for flat collars upto 25mm wide, like the origin model.

Dog Collar AirTag Holder - Strong Split

Airtag

marpicio7

silicate case for sunlu s4. the lid attaches to the base with hooks to avoid spilling the silicates into the dryer.this version of the box is a little lower so that its original lid can be inserted.in the center of the lid there is a small hole where with the help of an m3 screw you can remove the box without difficultydo not print in PLA, it may melt. recommended materials, PETG,ASA or ABS. I printed them in ABS

Silica box for Sunlu S4

Sunlu S4

squinn

This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches. The strong & stackable design allows you to meet whatever height is needed.&nbsp;This is an easy print that requires no supports, and the STL is oriented as it should be for printing. Three heights are available at 11 cm, 16 cm, and 21 cm tall (the one shown in the pictures is the shortest of the three). All are 10 cm wide, but this model should also easily support scaling as well if you'd like a different size.

Open Cage Stackable Plant Support Stakes

Garden

NC-Designs

Ever feeling indecisive about where to eat? Find yourself in a “no, where do YOU want to eat” battle with your spouse? Meet the Dinner Spinner!&nbsp;&nbsp;Make My Sign Info&nbsp;This model is powered by Make My Sign from MakerWorld (www.makerworld.com/en/makerlab/MakeMySign). Using Make My Sign and their SVG import tool, anyone can create additional logos or custom text for things like chores, activities, date night, games to play, etc. Most of the SVGs for the restaurants shown came from either <a target="_blank" href="https://worldvectorlogo.com/" rel="nofollow noopener">https://worldvectorlogo.com/</a> or <a target="_blank" href="https://commons.wikimedia.org/wiki/Category:SVG_logos_of_fast_food_restaurants#." rel="nofollow noopener">https://commons.wikimedia.org/wiki/Category:SVG_logos_of_fast_food_restaurants#.</a>&nbsp;To create your own logos or custom pieces to fit in the box, use the following settings in Make My Sign (these settings will minimize the amount of color changes as well):<ul><li>50mm x 50mm Shape</li><li>10mm Corner Radius</li><li>Medium Border with 0mm Offset</li><li>Thicknesses:<ul><li>Base Plate - 1mm</li><li>Text & Sticker - 0.2mm</li><li>SVG - 0.2mm</li><li>Shapes - 0.2mm</li></ul></li></ul>When you download a custom piece, I recommend downloading the 3MF file as it makes coloring much easier (don't color by face but color by part under the “Objects” tab instead). There are also some tricks I learned like using “Negative Part” type and deleting overlapping parts that come with the SVG to get the exact coloring you want.&nbsp;Assembly Instructions&nbsp;Each of the logos snap into place in the back of the dinner spinner. I recommend either:<ul><li>Printing all pieces except the logos, then one logo, and then scale the logo in ~0.1% increments until you get the fit you want. Then print the rest of the logos at the same scale.</li><li>Printing the logos you want and then the fitment test piece. Depending on that fitment you can adjust the scale in ~0.1% increments until you get the fit you want. Then scale the dinner spinner, spinner, spinner axis, and optional backing plate the same amount.</li></ul>There are spots for two 5mm x 2mm thick magnets (<a target="_blank" href="https://a.co/d/8JerZ9a" rel="nofollow noopener">https://a.co/d/8JerZ9a</a>) to be glued in each corner for putting it on the fridge. I ended up adding a third magnet to each corner that sticks out a little bit to make it more secure to the fridge.&nbsp;There is also an optional backing plate that has a cutout for mounting to a wall if wanted.&nbsp;&nbsp;Thanks for viewing, downloading, rating, etc. Any feedback is welcome!&nbsp;&nbsp;

The Dinner Spinner (20+ Logos Included)

Games

Brandido02

I had this wooden planetary geared light switch, but it broke. So, I recreated it. took a month to do because i had to learn how to create gears, but I think I finally got it!No need for any supports!You just need four m2x8 and two m2x6 screws.

Planetary Gear Light switch

Wall

SeizedClutch

This is a great devide to go on your light switch cover to keep a certain light on/off. Especially useful around children or with switches that should not be messed with. Light can still be changed by flexing the tab out of the way. Print in PLA for flexibility

Light Switch Lock

Printed

clehn8ok

Fidget Pill Organizer in Oreo Style, with 7 compartments 28mm x 12mm x 10mm&nbsp;See it in action:<figure class="media"><div data-oembed-url="https://youtu.be/tvKOu8KY6dk?si=vWfUTmmwWsBsnm-K"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tvKOu8KY6dk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;everything is pressfit, but you can use some superglue just to be safe.&nbsp;prints withtout supports, but i'd recommend to print the two disks with support, since it ensures a better pressfit&nbsp;Assembly:<ul><li>Bottom</li><li>press in the white ring</li><li>insert the golden hub</li><li>press the white main body onto the white ring (you can use some superglue between the bottom and the main body, but keep the spring clear)</li><li>press on the top, note the direction of the cutout</li></ul>

Fidget Pill Organizer 

Containers

aim6mac

since i got the A1 mini I wanted to make the footprint of it smaller , now I finally had some time to do it enjoy…&nbsp;recommendations on the spool installation when not using 4 filaments at the same time on the AMS lite3 filaments : 2 in front 1 in back2 filaments : 1 front left , 1 back right or 1 front right , 1 back left1 filament : 1 front left or 1 front right&nbsp;The pins to connect the left feet and the top bar are tight and only go in one way correctly, if the holes do not line up turn them 180° until they do line up, otherwise this will end up with crooked left and/or top bar!&nbsp;8 x M5 x 25mm bolts needed to assemble the whole unit. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=otxYWoVrrcM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/otxYWoVrrcM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

A1 mini AMS LITE space saver (top mount original)

Bambu A1

cube3dworld

&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/342853/rich_content/efaa1eaf-dd18-4b69-8328-6ecf78bbab5a/gif.gif"></figure>You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF.Personalized Christmas Card is suitable for C6 envelope 114x162mm.&nbsp;Tips: - Print STL file if you do not want to edit the text. - Change the color for text in Slicer, it looks better.&nbsp;HowToPrint: - Recommended Layer Height: 0,16mm or smaller - Support: No - Infill: doesn't matter. - Recommended: Change color in Slicer for Text - Brim: No&nbsp;&nbsp;ALL CUBE3DWORLD designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

PERSONALIZABLE CHRISTMAS CARD 

Christmas

lukasglowinski

Lately I have discovered the BambuLab swatches. They are great way to display your filament samples. But what if you have a lot of different filaments from many different brands? In no time you will have the swatch plate full and you will need another one and yet another. That's why I came with an idea of making the swatch plates organizer/case. When printed you will need 4 M3x16mm socket cap screws to put the casing together. The swatch plates will slide nicely in the organizer. You can use original BambuLab swatch plates, but I've also made my version with tabs witch allow for better/easer sliding in and out of the caseing. And also have type of filament writen on them. I've uploaded the step files for my version of the plates so you can moddify and add your own types of filament or if you want arange your filament by brand you can put the brand name on the tabs.Use an accent colour for the names on the tabs if you want them to stand out even more.&nbsp;On request added 5 swatch plates with blank tabs (stl) for the ones who want add own text in the bambu studio slicer.Check out the bigger version of this design <a target="_blank" href="https://makerworld.com/en/models/135375#profileId-146917" rel="nofollow noopener">Bigger case/organizer for Bambu lab swatches</a>

Case/organizer for Bambu Lab swatches

Filament

MottN.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, consider giving it a boost to support the creation of more cool stuff! Thanks!</boostcontent></boostme><ul><li>Update 2023_11_15: added links to finger tracks XL for anyone struggling to get the print to work.</li><li>Update 2023_11_13: Updated files to chamfer some additional corners on the tread to feel nicer.</li><li>Update 2023_11_10: Updated models and print profile. Model is optimized to print better and the track will be much more reliably free running.</li></ul>&nbsp;Everyone needs some tracks to drive around with their fingers!This is a very satisfying and fun fidget, and also my first print in place model :)&nbsp;When first printed each track joint may take a tiny bit of force to free up; after that the tracks should run freely with little effort.&nbsp;To remove track:If it continues to be difficult to run, or has a sticky spot, you may have to remove the track to completely free up.This also makes for an easy multi-color model; print in two colors and swap tracks! (Don&#39;t risk this if your material doesn&#39;t have good layer adhesion like some matte or silk PLAs, you will break the track pegs.)&nbsp;To remove the track, hold with the connected side of the track body down, and with your fingers apply pressure on the wheel hubs to bend slightly inwards. This should provide enough clearance that the track can easily be removed.Replacing the track is slightly more difficult but follow the same basic strategy of flexing the track body.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-13_dd9789575054a8.gif"></figure>&nbsp;PrintingThe model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.&nbsp;If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it&#39;s not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.&nbsp;&nbsp;Print in the orientation shown below or as in the print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-07_d1b42cc880c0e.png"></figure>&nbsp;If you want to print several different colors, you can fit 5 on the build plate in print by object mode. Then just print overnight or come back in ~10 hrs. I&#39;ve uploaded this profile as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-10_af9cff3ff21ad.png"></figure>&nbsp;Related cool stuff!If you are having trouble with durability of the pins or tracks, or just not being able to get things to free up, check out the Finger Treads XL model. It has bigger pins and is a little more forgiving because of its larger size. It&#39;s big enough its not quite as good of a fidget, but still a very satisfying print in place model and fun to play with.&nbsp;Get it here: https://makerworld.com/en/models/65624#profileId-68957&nbsp;Size comparison below - XL version top.<figure class="image image_resized" style="width: 32.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_b4cf6d1a056c8.jpg"></figure>&nbsp;&nbsp;&nbsp;If you have printed a bunch of these and need something to do with them, check out the Benchy-Dozer!https://makerworld.com/en/models/85433#profileId-91329<figure class="image image_resized" style="width: 41.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_c16db6c5576808.jpg"></figure>&nbsp;