Cosmic Debris 3D

fishing

BamBam Design

Kids Workspace - Screwboard for Desk and Wall (V1.1 Changelog @bottom)Designed for the next Maker Generation! 👦👧A very nice toy for childs where they could practice to use different tools for different screws.<ul><li>Use the included mount for the wall, you can simple slide the board above, so you can change quickly to the wall/desk.</li></ul>&nbsp;The Board has 12 threads, all same pitch, but with 3 different fittings & colors.There are 3 types of screws and 3 cool looking tools included for that:<ol><li>Phillips Screwdriver</li><li>Allen key with T-Handle</li><li>Wrench for outer Hex</li></ol><ul><li>The Screwboard has slots for the tools, 3 each at the front & top for desk & wall situation.</li></ul>I designed all parts with lowest possibility amount of color change and waste, but feel free to give it more color.&nbsp;Printed all parts in PLA+, my kids love it!Use some extra walls to make it stable!&nbsp;Step files are uploaded, i am exited to see some cool remixes! Create own tools or other screws and addons as remix as well.I will refer to good Remixes here:<ul><li>Real Bit adapter <a target="_blank" href="https://makerworld.com/models/100671" rel="nofollow noopener">https://makerworld.com/models/100671</a></li><li>Hex Nuts <a target="_blank" href="https://makerworld.com/models/120822" rel="nofollow noopener">https://makerworld.com/models/120822</a></li><li>Side Box <a target="_blank" href="https://makerworld.com/models/131870" rel="nofollow noopener">https://makerworld.com/models/131870</a></li></ul><figure class="media"><div data-oembed-url="https://youtube.com/shorts/L3hPdkHCCbs?feature=shared"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=L3hPdkHCCbs"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/L3hPdkHCCbs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>A like and follow costs nothing.👍Thank you and happy printing!&nbsp;ChangelogV1.1 Geometrical Change only to Base Part (Workspace V1.1.step)<ul><li>Added 2x4 M3 Nut Pockets as mounting holes at the sides for future upgrades</li><li>Added little nose to prevent sliding out to easily</li><li>Extra Wall at stress height (T-Handle & Phillips)</li><li>Extra Profile for ultra stable screws and 2 Parted T-Handle as option</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/770457/2024-01-08_90d21af4456ef.png"><figcaption>Mounting Holes Dimension - If you want to drill V1 or add some additional things.</figcaption></figure>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Kids Workspace - Activity Board for Desk and Wall

kids stuff

JamesThePrinter

Six versions are available:<ul><li>Little Debbie Christmas Tree - Bite<ul><li>Multi-Color</li><li>Single Color</li><li>No Ornament Loop</li></ul></li><li>Little Debbie Christmas Tree - No Bite<ul><li>Multi-Color</li><li>Single Color</li><li>No Ornament Loop</li></ul></li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;&nbsp;Print SettingsMulti-Color Version - To ensure that the sprinkles don't easily break off, I sunk them about 1mm into the frosting. The downside of this is that the first couple top layers of frosting can be messy. To help with this, I used 5 top layers.&nbsp;Single-Color Version - no special settings are required&nbsp; <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li></ul>

Little Debbie Christmas Tree

Christmas Decor

Hello Kitty LED LightBox and Night Light&nbsp;5v usb RGB wireless light strips are sourced from Temu for around $2.50 as well as a USB extension for around $2.50 as well

Hello Kitty LED LightBox

light boxes

agepbiz

<a target="_blank" href="https://youtube.com/shorts/Ss0iSEgnsyo" rel="nofollow noopener">https://youtube.com/shorts/Ss0iSEgnsyo</a>Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free!Both the dump truck and the egg was each designed to be print-in-place without any need for support structures. The dump truck has rotatable wheels and liftable open-box bed. The egg is hingedTwo egg options, one with the print-in-place lock and one for 3x1mm magnets (magnets need glue)&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a>&nbsp;WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>No Support No Raft 0.1mm-0.15mm Layer Height 3 Perimeters/walls on the Dump Truck 2 Perimeters/walls on the Egg 30mm/s printspeed

Surprise Egg #14 - Tiny Dump Truck

surprise eggs

Jorge Rui

<blockquote>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;For a small help use this affiliate link to buy fillament, it will cost you the same. Thanks !<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a><a target="_blank" href="https://shrsl.com/4cpox" rel="nofollow noopener">Complete hotend for the X series</a><a target="_blank" href="https://shrsl.com/4cpoy" rel="nofollow noopener">Hotend with nozzle X series</a><a target="_blank" href="https://shrsl.com/4cpov" rel="nofollow noopener">Other Accessories</a>&nbsp;</blockquote><h2>A note about this model</h2>There is a nes and updated version of this, with a modular approach, based on my <a target="_blank" href="https://makerworld.com/en/models/13415?profileId=13268" rel="nofollow noopener">MMSS</a>, and is available <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">here</a>.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_37429ce72890f.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b69a4d08ab4d8.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_8fb4405968195.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_de4c9a7b9700e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_97413a6c36b6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b12c00384f143.jpg"></figure></td></tr></tbody></table></figure>Nevertheless, this one was my first take on this, and I think it’s nice for you to have something to store your tools and accessories ;)&nbsp;This is a debugged version of the initial release. It presents all the updates and some improvements that have been implemented in the meantime. This version will be updated over time.The entire production sequence was updated in order to translate the comments that were made over time by members. However, you are free to define your own printing strategy. The colored areas are already found as separate objects, therefore it is not necessary to use the painting tool, an exception for the areas where the accessories come reside; in this situation, I chose not to create different bodies, as it is my opinion it would take too long to print, increasing the potential for errors. In this last situation, and if you want, you can simply use the “area painting tool”.<h2>Instructions</h2>ClipsSome examples regarding fits and snapfits. <a target="_blank" href="https://youtu.be/TNyjlRgM0HY" rel="nofollow noopener">(youtube link)</a>&nbsp;Extra material:<ul><li>For the hinges, you will need 2x M4x30 CHC ISO 4762, or a FHC of the same size. If you don&#39;t have that you can print.</li><li>You may want the scrape… you can find it <a target="_blank" href="https://www.printables.com/model/531116-small-scraper-tool" rel="nofollow noopener">here, it is a model that I&#39;ve Remixed</a></li><li>spacer_ silicon_sock.STEP - needed if you have a narrow silicon sock on the hotend (most people will need this)</li></ul><h3>Change Log:</h3><ul><li>(31-08-2023) Revised Latch - More functional<ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li><li>(29-04-2024) Revised Latch - More functional <ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li></ul>&nbsp;

Bambu Lab - Tools and Accessories Box

bambu stuff

wuguigui

<h2>Summary</h2>I designed a 3D print clip without spring, the separated jaw mouth could be optionally chosen according to different usage.This design had another important function is to put pressure on the jaw mouth constantly, so it will not be loose like other 3D print clips.I recommend PETG as the filament because it has better toughness, not bad when using PLA+. But I haven't tried ABS yet, someone could help to do it.If you like it, please click "like“ it:)Thank you!A new one was designed based on this clip, with suction cup: <a target="_blank" href="https://makerworld.com/en/models/12904" rel="nofollow noopener">https://makerworld.com/en/models/12904</a><h2>Print Settings</h2>Printer: snapmaker 2.0 A250 Rafts: No&nbsp;Supports: No Resolution: 0.2&nbsp;Infill: 60% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=snapmaker+PETG+or+PLA%2B" rel="nofollow noopener"> snapmaker PETG or PLA+ </a> any

Clip

household stuff

DonMatis

One Piece wall art for decoration, can be painted with more colours after.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA+ Sunlu Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA Bambu Labs Basic White</li></ul>Swap Instructions:<ul><li>Black until layer #5 at 0.48mm</li><li>Gray until layer #10 at 0.88mm</li><li>Light Gray until layer #19 at 1.6mm</li><li>White for the rest.</li></ul>