CorneliousJD

MottN.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, consider giving it a boost to support the creation of more cool stuff! Thanks!</boostcontent></boostme><ul><li>Update 2023_11_15: added links to finger tracks XL for anyone struggling to get the print to work.</li><li>Update 2023_11_13: Updated files to chamfer some additional corners on the tread to feel nicer.</li><li>Update 2023_11_10: Updated models and print profile. Model is optimized to print better and the track will be much more reliably free running.</li></ul>&nbsp;Everyone needs some tracks to drive around with their fingers!This is a very satisfying and fun fidget, and also my first print in place model :)&nbsp;When first printed each track joint may take a tiny bit of force to free up; after that the tracks should run freely with little effort.&nbsp;To remove track:If it continues to be difficult to run, or has a sticky spot, you may have to remove the track to completely free up.This also makes for an easy multi-color model; print in two colors and swap tracks! (Don&#39;t risk this if your material doesn&#39;t have good layer adhesion like some matte or silk PLAs, you will break the track pegs.)&nbsp;To remove the track, hold with the connected side of the track body down, and with your fingers apply pressure on the wheel hubs to bend slightly inwards. This should provide enough clearance that the track can easily be removed.Replacing the track is slightly more difficult but follow the same basic strategy of flexing the track body.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-13_dd9789575054a8.gif"></figure>&nbsp;PrintingThe model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.&nbsp;If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it&#39;s not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.&nbsp;&nbsp;Print in the orientation shown below or as in the print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-07_d1b42cc880c0e.png"></figure>&nbsp;If you want to print several different colors, you can fit 5 on the build plate in print by object mode. Then just print overnight or come back in ~10 hrs. I&#39;ve uploaded this profile as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-10_af9cff3ff21ad.png"></figure>&nbsp;Related cool stuff!If you are having trouble with durability of the pins or tracks, or just not being able to get things to free up, check out the Finger Treads XL model. It has bigger pins and is a little more forgiving because of its larger size. It&#39;s big enough its not quite as good of a fidget, but still a very satisfying print in place model and fun to play with.&nbsp;Get it here: https://makerworld.com/en/models/65624#profileId-68957&nbsp;Size comparison below - XL version top.<figure class="image image_resized" style="width: 32.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_b4cf6d1a056c8.jpg"></figure>&nbsp;&nbsp;&nbsp;If you have printed a bunch of these and need something to do with them, check out the Benchy-Dozer!https://makerworld.com/en/models/85433#profileId-91329<figure class="image image_resized" style="width: 41.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_c16db6c5576808.jpg"></figure>&nbsp;

Finger Treads Fidget Track - Print In Place

Fidgets

Dsema

I'm always playing this with my friends, so what better than giving them this Easter egg :)

Egg with 'The Circle Game' hand :)

Gifts

SOME Studio

Updated with hole for hanging.&nbsp;This tool helps removing <a target="_blank" href="https://multiboard.io/" rel="nofollow noopener">Multiboard</a> snap fit inserts. It consists of a medium thread with a handle that can be used to leverage the snap insert out.

Multiboard Snap Removal Tool

Multiboard

Benjamin Kott

<h3>Organizer Box (Fully Parameterized) with Fusion 360 Source Files.</h3>Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/_2nHOIhereM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_2nHOIhereM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall thickness</li><li>Punchhole Diameter</li><li>Punchhole Spacing</li><li>Corner Radius</li><li>Save space on the top and bottom</li></ul><h3>Customizing Tips:</h3><ol><li>If you adjust the width and length, it can be helpful to adjust the corner radius before making changes.</li><li>If you adjust the corner radius, ensure that the desired size fits your desired width and length.</li><li>If you want to create a round object. please ensure the width and length are matching. Configure the corner radius to ½ - 0.01 of the width or the length. Example: You have a width of 80, set the corner radius to 39.99.</li></ol><h3>Why another box model?</h3>There are a lot of box models already available, but all I found were static,or have features or design aspects that did not fit my needs.&nbsp;I need a model flexible, that can easily adapt to any size I need - and also would be approved by my wife.Maybe I also wanted to play around with repeating auto-calculating patterns in Fusion 360, okay okay - you got me.&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates:</h3><ul><li>20.02.2024<ul><li>Added 20x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214791" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214791</a></li><li>Added 10x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214795" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214795</a></li><li>Added 15x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214801" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214801</a></li></ul></li><li>01.01.2024<ul><li>Added 2 new cylindric versions<ul><li>10x10x13cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126695" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126695</a></li><li>8x8x10cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126713" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126713</a></li></ul></li><li>Changed extrusion for the holes in the Fusion 360 model</li></ul></li><li>24.12.2023<ul><li>Fixed baseplate calculation in the Fusion 360 model</li></ul></li></ul><h3>More Fusion 360 Parameterized Models</h3><ul><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/114250" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_519e073d57512.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">Stackable Storage Boxes</a></td><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/147775" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_fb6186fdc76a4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">Boxes Diamond Edition</a></td></tr><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/392542" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-24_bbcd7d56b5ac1.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/392542" rel="nofollow noopener">Stackable Boxes</a></td><td style="width:50%;"> </td></tr></tbody></table></figure>

Organizer Box / Boxes

Functional

planpa3d

I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.Just can’t wait to see the Movie being released this year!!Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.NOTE: This version does not include the Switch game holder insert, the hex pieces to hold the spikes, nor the spiked pieces themselves.If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,<a href="https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer" rel="nofollow">https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer</a>&nbsp;I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm<a href="https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow">https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1</a>&nbsp;All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together. The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.With the trim printed and assembled, it should be glued to the completed bottom shell.When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on.&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here…<a href="https://www.patreon.com/planpa3d" rel="nofollow">https://www.patreon.com/planpa3d</a>&nbsp;Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…<a href="https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert" rel="nofollow">https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert</a>&nbsp;Happy Printing,Jeremiah&nbsp;

Turtle shell container

Gaming Props

JKtech3D

Remixed the original cardboard spool adapter design to secure to the spool utilizing the holes using a press fit design. It is also clipless to allow for easier removal and should be appropriately sized to apply enough friction on the outer edges.Confirmed capability with Overture and Inland cardboard spools and probably other similarly designed spools.

Overture and Inland Cardboard Spool Adapter for Bambu Lab AMS

X1 Accessories

krazi201

Some simple “Super Mario Mushroom” earrings (might work as keychain as well → would use PETG instead of PLA in that case).&nbsp;Please use my print profile and a 0.2 nozzle to get a decent result.Print on textured plate to have a nice surface finish.&nbsp;The colored layers are only 0.5mm in total to keep down printing time.As a result of this you might see black shadows through bright surface colors from black top layers (1mm in total).If you like to have brighter colors just change size/ratio of assembled objects as you wish.

Fidgets

Gifts

Multiboard

Functional

Gaming Props

X1 Accessories

Crafts