Control3D

SASSy Design

A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior. Print information:<ul><li>Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)</li><li>Prints very good in any filament</li><li>The model is scalable to your liking</li></ul>Happy printing!

Inverted Hexagonal Plant pot Planter - Vase mode

Cuencos

RJ Design

The Design&nbsp;Building on the well received impossible passthrough illusion. This is Version 2&nbsp;It fixes the problems present in the first Design. &nbsp;No more messy overhang, a good slide straight after printing, and much better bed adhesion. &nbsp;This is a fun piece and can be used as a fidget toy as well&nbsp;Dimensions are approximately: diameter 46mm x 50mm&nbsp;Let me know if you experience any issues.&nbsp;If you enjoy this print consider giving it a boost (It&#39;d really help me out!)&nbsp;Printing&nbsp;The Print Profile should be used if possible. The hour glass object should have auto tree supports enabled to 30 degrees, and a layer height of 0.16mm, the barrel shape should have no supports and a layer height of 0.2mm &nbsp;It is set up to print by object (1 part then the next) &nbsp;&nbsp;My WorkAfter many years in Engineering, I&#39;ve just decided to try and follow my childhood dream of becoming of a Creative Designer.A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that&#39;s where I&#39;m going to focus my efforts.&nbsp;Boosts really help me out&nbsp;To support me even more (not ever required), for information around development of my models (background to come) and for commercial use, i&#39;ve started a patreon here:<a target="_blank" href="https://www.patreon.com/RJ_Design" rel="nofollow noopener">https://www.patreon.com/RJ_Design</a>

Impossible Vortex Passthrough illusion - Version 2

Ilusiones Ópticas

chiz_m

<h3>The most effective, ergonomic and easy-to-use PTFE release tool for the A1 – the EZ A1 PTFE Release Tool!</h3>*** For best results, please see Tips for Success section ***<h3>If you find that this tools works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3>PTFE tubes on the A1 AMS Lite hub is difficult to remove. Per the Bambu wiki, one has to press down the locking ring with a tweezer in order to remove the PTFE tube. I find it too fiddly and I&#39;m afraid that constantly doing so will eventually cause the gantry to sag and affect alignment.<h3>SOLUTION</h3>Design an ergonomic tool that will allow easy release of the tube without pressing the entire hub down using only one hand while allowing the other hand free to pull the PTFE tube.<h3>FEATURES</h3><ul><li>Stable and efficient - less prone to errors as tool attaches to the hub preventing accidental sliding</li><li>Easy to use - Designed with the best user experience in mind! Operate the tool comfortably and naturally by squeezing the thumb and index fingers together</li><li>Less damaging to the printer - during operation of the tool, stress is limited to the filament hub only and not to the entire gantry</li></ul><h3>PRINTING DIRECTIONS</h3><ul><li>Choose between the default profile (better print quality) or the vertically-oriented profile (recommended for smoother operation) which makes the layers on the thumb press perpendicular to the layers of the clamp part which allows for smoother sliding action.</li><li>Use rigid filaments such as regular PLA, PLA+, ASA, ABS, etc. DO NOT USE matte or silk PLA as these filaments are soft and do not provide strong layer adhesion.</li><li>Print as oriented.</li><li>Comes with built-in supports. No need to turn on supports.</li></ul><h3>TIPS FOR SUCCESS</h3><ol><li>If you find the tubes still very hard to pull out, try pressing the tube down slightly to allow the metal locking teeth to release before pulling the tube out.</li><li>Make sure that you have the thumb press aligned in the corner and that it&#39;s pressing only one ring at a time. Otherwise, if it&#39;s hitting other rings, you might not be pressing the ring down enough.</li></ol><h3>HOW TO USE</h3>IMPORTANT: Tool is not meant to be permanently attached to the printhead as it will prevent filament tangle detection to work. Remove the tool after use.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392785/design/2024-04-27_283930b7afd63.png"></figure><h3> </h3>

EZ A1 PTFE Release/Remover Tool

A1 Mods

entroisdimensions_figurine

Vulpix is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 6 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351642681" rel="nofollow noopener">PolyTerra PLA Wood Brown </a>(for body) or <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351904825" rel="nofollow noopener">PolyTerra PLA Pastel Peach</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351937593" rel="nofollow noopener">PolyTerra Sunrise Orange</a> (for wick and tails)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351216697" rel="nofollow noopener">PolyTerra PLA Army Beige </a>(for belly)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351544377" rel="nofollow noopener">PolyTerra Army Brown</a> (for paws and inside of ears)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> (for pupil)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcaol Black</a> ( for eyes)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: Brown, orange, beige, black and white</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Vulpix Multicolor

Pokemon

3DMDesign

Meet Bobby, a cute 3D model of a baby dinosaur that combines cuteness and prehistoric flair. With his big expressive eyes and playful attitude, Bobby is the perfect buddy for any kid or anyone looking to add a little Jurassic charm to their collection.&nbsp;19.04.2024 - Adjusted eye contours to make them more expressive in single colour printing.

Bobby the Baby Dinosaur

Cute

Codyinbody3

Since my wall mount helmet display did so well, I decided to release my standing helmet display stand. This stand can be either as tall or as short as you need and each piece of the rod take a good amount of pressure to fit on but I tend to twist while pushing it on so that way it fits tight and snug. Once its put together it&#39;s solids and sturdy along with having a sleek and slim design to not look like a lot of those other bulky stands that are geared towards a certain genre with emblems or other identifying marking where you can only use the stand for certain helmets. Enjoy!

Helmet Display Stand (Variable/Adjustable Height)

Cosplay

One Maker Show

<h2>Super Mario Mystery Box Lamp 👾</h2><h4>Classic Super Mario Mystery Box Lamp with Punch Activation</h4><h3>What You Need</h3><ul><li>e14 Led Bulb like <a target="_blank" href="https://amzn.to/49pnDso" rel="nofollow noopener">THIS</a></li><li>e14 Bulb Older like <a target="_blank" href="https://amzn.to/3J6cy4Y" rel="nofollow noopener">THIS</a></li><li>a Push Switch like <a target="_blank" href="https://www.amazon.it/InputMakers-interruttori-inchiodamento-artigianato-scolastico/dp/B09PM9NC92/ref=sr_1_6?dib=eyJ2IjoiMSJ9.Qmq2CSRIFb1ByD-DO2wUIGwoIQEDmaYqRMRLhGcaFC2lDnW6lIEjy7Sjna4lXJ4F8WPy8wfdITOFgHtsv1VEA-h8OUEiuB1TjpFX5DuFxm6YH1kpXT2hqV-ZOFmmtmYc9GVh0q6fCanNLXnHELOEPGHl2UkfWLIUk-vxXRwN_hRfyUNTSth3LoHmP_xxQi6HHItYx8nnbA6No2L_V60aY9EIXV70m2uuCC_W6blPjMSTnnqtwHK41GiY4d23_49si3Tr4Dg_vVhoi6m8XdR4R1HCyG4QH8cT7E6iwGYAIj0.eVmAlxNxgxlVOTEdyiwP1uVJNd3_EFm39w-Wyx0TFJY&amp;dib_tag=se&amp;keywords=interruttore+a+pressione&amp;qid=1712225810&amp;sr=8-6" rel="nofollow noopener">THIS</a></li><li>Cable with Plug (long as you desire)</li><li>Glue</li><li>2 little scews</li></ul><h3>READ NOW OR CRY LATER</h3>This is not a simple print, many things can go wrong, be sure that your printer is fully calibrated and clean.Some consideration about filaments and profile plates.&nbsp;• PETG or ABS is the better choice for heat resistance, but if you go with an LED bulb PLA is good as well• For the Question Mark (Plate 1), use a filament that makes a good light effect like <a target="_blank" href="https://azurefilm.com/it/prodotto/filamento-petg-lumos-moon-light/" rel="nofollow noopener">Azurfilm Lumos Moon Light</a> or <a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">Bambu PLA Basic Jade White</a>• To increase the yellow effect on light choose a Hot Light Bulb, like a 3000K Temperature Color• The Springs (Plate 2) are a middle way between Hard And Soft if they are too strong for you, redraw them with fewer curves but don&#39;t change the height needed to stay the same (30 mm)• Plate choice is crucial and depends on the Filaments chosen and the final effect, I like the Textured Plate finish.• Every Plate has a different specs, tested for the better result• On Plate 4 removing support can be tricky, but they are mandatory, you can print the Bottom upside down if you want but the print time increases by 4 times• Infill, My first choice was Grid Infill rotated by 90 degrees to simulate pixel effect in transparency, but after some testing, the grid infill gave some problems so I switched to Gyroid infill which is beautiful enough• Plates 1, 5, and 6 need to be printed twice• A minimum post-processing are necessary and phisiologic<h3>Assemblage</h3>There are 2 ways to assemble the lamp, depending if you want to use it on a table or under a shelf.&nbsp;1) Joint questions Marks and Dots on every Side Face from behind (x4)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_91727ed8cf6c7.jpg"></figure>&nbsp;2) Joint questions the 4 faces<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_13d7f7aa9f00b8.jpg"></figure>3) TIME TO MAKE A CHOICE - Joint Top And Bottom depending on your final use<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_43668328b19ec.jpg"></figure>4) Glue the 8 springs in the basement<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_05dd1ffa1f78f.jpg"></figure>5) Make connection between the Bulb Older, the switch, and the Cable.6) Screw the Bulb Older at the Base and install the Bulb7) Glue the Switch wherever you want in the Base<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_9a29578fbeefa8.jpg"></figure>8) Push the Base on the Cube and rotate it by 90 degree<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_ba69f9c4ba7528.jpg"></figure>&nbsp;<h2>YOU ARE READY TO PUNCH IT</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000413096/design/2024-04-04_c8addc6847b4c8.gif"></figure>&nbsp;&nbsp; __________________________________________________________________________<h3>Hey, If you like my <a target="_blank" href="https://makerworld.com/en/@OneMakerShow" rel="nofollow noopener">stuff</a> Maybe You also like my <a target="_blank" href="https://www.instagram.com/mattia.confalonieri/" rel="nofollow noopener">SHOW</a></h3>

Super Mario Mystery Box Lamp

Super Mario

Printednest

<h2>CARAMEL CRC RC Car</h2>We are very happy to present you our fully printable RC car!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/515569/2024-02-06_e3409802f8714.jpg"></figure><h2>You can find everything about project <a target="_blank" href="https://www.printednest.com/caramel-crc" rel="nofollow noopener">HERE</a></h2> The files and instructions are relatively large, and it will be better for you to browse them at the project page.&nbsp;Step by Step Assembly Guide you can download <a target="_blank" href="https://www.printednest.com/_files/archives/784fe6_acfd1370658c47b19322573a685f7630.zip?dn=CARAMEL_CRC_Manual_v1.02.zip" rel="nofollow noopener">here</a> as *.zip file that contains PDF instructions and Bils of material.<h4>The attached 3mf files are divided according to the material from which the parts should be printed. We strongly recommend printing the first calibration test print.</h4><figure class="image"><img src="https://static.wixstatic.com/media/784fe6_78b543c9e7c44210b554614fff02b7f5~mv2.jpg/v1/crop/x_246,y_0,w_3318,h_3024/fill/w_490,h_446,al_c,q_90,enc_auto/IMG_9359.jpg" alt="IMG_9359.jpg"></figure>&nbsp;&nbsp;3D PRINTED REAR SUSPENSION - We have designed 3D printed adjustable rear central shock absorber and lamellas&nbsp;3D PRINTED FRONT SUSPENSION - Independent 3d printed silent blocks for left and right wheel&nbsp;3D PRINTED TYRES - Double-layered shock-absorbing tyres&nbsp;CRASH PROTECTION - We have front and back bumpers from flexible TPU filament for collision absorptions&nbsp;3D PRINTED GEARED BELT DRIVE - Durable, silent. 3d printed timing belt, pulleys and rear axis system with 1:2 ratio&nbsp;PETG REINFORCEMENT - We have tunnels for additional structural body reinforcement&nbsp;ADJUSTABLE DRIVE HEIGHT - You can change drive height with a few turns of the wheel on central shock absorber system&nbsp;ADJUSTABLE BELT DRIVE - Easy access and adjustable tension of belt drive&nbsp;EASY BATTERY ACCESS - Battery and electronics accessible from the bottom of the car&nbsp;INVISIBLE JOINTS SYSTEM - System of hidden drawers for connecting body parts in robust solid structure&nbsp;EXTENSIONS READY - Tunnels for wiring of headlights and taillights, sound system, sensors etc.&nbsp;NO PLASTIC MELTING - Unique bionic body design allows airflow for cooling of electronics&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=8WZWtma_Zbg&list=TLGGocDJsA5NnIwwNjAyMjAyNA&t=4s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8WZWtma_Zbg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/515569/2024-02-06_9834e968fab6c.png"></figure>&nbsp;What you need:&nbsp;1,35 kg of filament needed for all parts, PLA, PETG, ASA and TPUYour own motor/speed controller, servo, battery and remote controllerscrews and nutsset of bearingsstock timing belt (optional) or you can print your own from TPU&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/515569/2024-02-08_f2eaddaa785ec.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/515569/2024-02-08_1a594bcda60ee.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/515569/2024-02-08_9359d18847e9a.jpg"></figure>For a faster and cooler ride we recommended a Brushless engine. But is more expensive. In our list you can find cheaper version of electronics.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/515569/2024-02-06_3fc7b4bbf5d05.png"></figure>&nbsp;You can also watch this review our Caramel CRC from RC Printer on his YouTube channel&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=8WV-E85U3C8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8WV-E85U3C8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;web: <a target="_blank" href="https://www.printednest.com/" rel="nofollow noopener">https://www.printednest.com/</a>facebook: <a target="_blank" href="https://www.facebook.com/printednest" rel="nofollow noopener">https://www.facebook.com/printednest</a>Printednest Makers | 3d Print Group: <a target="_blank" href="https://www.facebook.com/groups/printednest" rel="nofollow noopener">https://www.facebook.com/groups/printednest</a>twitter: <a target="_blank" href="https://twitter.com/printednest" rel="nofollow noopener">https://twitter.com/printednest</a>instagram: <a target="_blank" href="https://www.instagram.com/printednest/" rel="nofollow noopener">https://www.instagram.com/printednest/</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

CARAMEL CRC RC Car Kit

Vehiculos

Filionix3D

Take shape of your dragon by moving each joint and create your magical creature. Make sure to have a well-calibrated printer for better accuracy. Enjoy discovering the magic of dragons with this unique puzzle!Note: Make sure to print everything at a resolution between 0.16 / 0.12&nbsp;Feel free to print Arachna the robot spider, discover it on my profile: <a target="_blank" href="https://makerworld.com/en/@Filionix3D" rel="nofollow noopener">https://makerworld.com/en/@Filionix3D</a>

Robot Dragon Articulated Puzzle

Articulados

k2thestank

Easy to print and fun to have!Features a slide and lock in Design to hold the Docking station tighter and prevents it from sliding or popping out as easy!<ul><li>You can split the STL's into parts for easier coloring as well if your not using the 3mf file as i have pre-split them in Fusion</li></ul>&nbsp;Stores 12 Game Cartridgestakes approx. 180gramsMaterials: - Crazy GluePrint Settings: - Walls: 3 - Top/Bottom Layers: 4 - Infill: 10% Gyroid Revisions: - Increased size of block for extra game slots and to improve its look- Fixed missing pieces and corrected files that didnt export correctly

Mario Switch Dock - Original System

Nintendo Switch

qiqiji

<h3>Scarf Joint Seam Test - a mini Hex Bit Handle</h3>This is a very simple handle for a 1/4-inch screwdriver bit, intentionally designed with a special shape that serves the dual purpose of being used for new Scarf Joint Seam testing models.&nbsp;Bambu Studio or Bambu Handy does not support this new seams yet. For this time, to testing Scarf Joint Seams, you must use <a target="_blank" href="https://github.com/SoftFever/OrcaSlicer/releases" rel="nofollow noopener">OrcaSlicer 2.0</a>, download Hex_Bit_Scarf_Seams_Test_OrcaSlicer.3mf file and import it to OcraSlicer 2.0 manually (see third picture).&nbsp;PS: Holes for Magnets Ø6x2mm are integrated, nice handy little tool after testing :)

mini Hex Bit Handle (Scarf Joint Seam Test)

Test

SPStudio

AMS Buffer Fix For Failed To Pull Back Filament Error

AMS Mods

EmBy Designs

First in the series.Not suitable for users who consistently remove the SD Card as there is no access hole.&nbsp;2 versions; AMS and non-AMS. AMS - Push the Joy Cons onto the frame. Non-AMS - All parts are push-fit and do not require glue but there is no harm in using a few drops for peace of mind.

X1 Carbon Screen Decoration Nintendo Switch

Multicolor

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

Cosas Útiles

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

StarWars

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul>&nbsp;UPDATE 8 Apr2024I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes, and sometimes make mistakes. Everyone makes mistakes, but it&#39;s important to make things right and work towards improvement.&nbsp;Bento mini is now available with Australia vendor JC-3D. They have improved their ops &amp; logistics. There will also be no more pre-orders to prevent late fulfilment.&nbsp;VENDORS:The US vendor for Bento mini - A collaboration between ThrutheFrame and Voxelpla to offer a complete set (printed in pet-g) with acid-free activated carbon included. For more information, please visit <a target="_blank" href="https://voxelpla.com/products/bento-mini" rel="nofollow noopener">Voxelpla Store</a>.<figure class="image image_resized" style="width:50.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2024-04-08_c831ba7c6a3f4.png"></figure>&nbsp;The AUS vendor for Bento mini is available for sale on JC-3D. It is printed in PET-g and comes fully assembled with activated carbon. For more information please visit <a target="_blank" href="https://jc3dmelb.com.au/products/bento-box-mini" rel="nofollow noopener">JC-3D</a>.<figure class="image image_resized" style="width:50.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2024-04-08_e421349ae0742.png"></figure>&nbsp;<h3>INTRODUCTION</h3>In September 2022, I designed the<a target="_blank" href="https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo" rel="nofollow noopener"> BentoBox</a> air scrubber for the X1C and enclosed P1P (such as<a target="_blank" href="https://www.printables.com/model/356301-arc-bambu-lab-p1p-enclosure" rel="nofollow noopener"> ARC</a>) to be used for printing ABS. This helps to reduce the fumes and VOCs build up within the enclosure. When I decided to build the Voron V0.2, I needed a BentoBox with a smaller form factor. Not an easy project due to the limited space within the V0,2 chamber. It has to be small, powerful and visually pleasing.Meet Bento mini. Small in size, powerful, and looks like a little bento for kids. The front dimension is the same as an iPhone 10. It uses a strong 6028 blower fan to push air thru the carbon pellets. There are 4 mounting holes where brackets can be customized for different enclosed printers.<h3> </h3><h3>What Does the Bento mini do?</h3>It is an activated carbon air scrubber housed within an enclosed printer. By cycling air thru activated carbon pellets within the chamber, it helps to reduce fumes and VOCs when printing filaments such as ABS, ASA and Nylon. This method of filtering air within an enclosure is called multi-pass which results in better filtration.&nbsp;<h3>What Advantages does it have over others?</h3><ul><li>Bento mini uses a more powerful fan (6028 vs 5015) which allows it to push air thru the pellets more efficiently.</li><li>When installed, it collects the hot air from the top and exhausts it at the bottom. This allows proper air convection current which helps maintain a steady enclosure temperature.</li><li>it is cuter.</li></ul>&nbsp;<h3>BOM</h3><ul><li>BHCS M3x6mm - 6</li><li>BHCS M3x8mm - 2</li><li>Brass inserts M3OD5mmH4mm - 7</li><li>6028 Blower fan - 1</li><li>Magnets Ø6x3mm - 2</li></ul>&nbsp;<h3>Where to Buy Your Consumables</h3>( links below are not affiliated unless stated)Acid-free activated carbon:US - Voxelpla offers acid-free activated carbon in a 1lb pack and HEPA filter replacement. You can support the Bento mini project by buying it from this affiliated link: <a target="_blank" href="https://voxelpla.com/thrutheframe" rel="nofollow noopener">https://voxelpla.com/thrutheframe</a>EU - Veetec3D offers acid-free activated carbon in 150gm &amp; 450gm. You can support the Bento mini project by buying it from Veetec3D Store for <a target="_blank" href="https://veetec3d.etsy.com/listing/1545297808/veetec3d-acid-free-activated-carbon" rel="nofollow noopener">Activated Carbon</a>&nbsp;JPN<ul><li>「KOTOBUKI パウーバイオ」はテストしました、酸は含まれていません</li><li>This <a target="_blank" href="https://www.monotaro.com/p/2090/5517/" rel="nofollow noopener">seller</a> in Japan was recommended by a user it has a PH of 9.8.</li></ul>&nbsp;I bought the 24V Dual Ball Bearings 6028 fans from <a target="_blank" href="https://www.aliexpress.com/item/1005003792895461.html?spm=a2g0o.order_list.order_list_main.23.67a01802juygsr" rel="nofollow noopener">GDStime</a> on Aliexpress.Order 5V if you intend to use a standalone power supply. Order a 24V if you intend to use the printer&#39;s PSU&nbsp;<h3>INSTRUCTION</h3><ul><li>Please download the user guide.</li><li>The 3mf file is prepared in OrcaSlicer in a multi-plate project style, it can only be opened with OrcaSlicer or Bembu Slicer.</li><li>The STL files are available in a folder if you require them.</li></ul>&nbsp;<h3>DIMENSIONS</h3><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2023-08-27_3069d2d585eb.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2023-08-27_3eb430cf785c1.png"></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like them and want to contribute to my coffee addiction &amp; help fund the filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated.&nbsp;<h4>Caveat</h4>As with all my designs, it may and may not work for you. So print and install at your own discretion.

Bento mini for Bambu Lab X1C P1P and Voron V0.2

P1 y X1 Mods

makernaut

<ul><li>I wasn't able to find a latest model F1 car for 2023, so I made one from scratch myself in Onshape.</li><li>This is a full, print-in-place, simple Formula 1 2023 car</li><li>Ready to go for printing on your X1C with minimal supports</li><li>Use your AMS + multimaterial to make custom colorways of your favorite Formula 1 teams</li><li>Two options: <ul><li>Print tires on the car (F1_2023_car_all-in-one.stl)<ul><li>This is the file loaded on this model page's print profile. Find the other files in the “raw model files” </li><li>the tyres are slightly flat on the bottom for printability.</li></ul></li><li>Print tyres separately, then glue on (F1_2023_car_body_only.stl + front_tyre.step + rear_tyre.step)<ul><li>tyes are then fully round, and printed layer orientation is a bit better for circularity.</li></ul></li></ul></li><li>The stock files are ~Hotwheels/Matchbox car sized (75mm long), but you can scale them larger, no problem. Just make sure to scale the tyres as well. If printing tyres separately, print them with the axle facing up.</li></ul>