I made these are simple files for quickly printing t pins to hold down laser material. I noticed the one I cut out of 3mm plywood were wearing out quickly. These were printed in PLA and tested 20+ times and are still a snug fit. I would suggest printing in PETG as well for better strength, but PLA works fine so far. I dont know if it will work on other model laser beds as I only have Glowforge Pro and tested on. Please let me know what you think of if I should improve upon the files.

My Annual Report

ok here is my second design for the VESKEN cart bin/tool holder. this is smaller, more practical and durable design. please give my design a boost!!! 💕

I had been searching for a little bin to clip to the side of the Ikea VESKEN cart, so that it can free up the space on top shelf (for more spools 😍). I had no luck in finding a design so I decided to design my own. This is my first 3D print design and it was an overwhelming experience to learn! The first one printed with the clip a few mm off center in 3hrs! I am so pleased after that improvements, the print time is now 2 hrs. Lemme know what you all think and where can I improve upon :)