Classy House Studios

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Useful Tools

giovannivigliotti3D

I designed this beautiful Easter bunny that comes out of the egg as a surprise... it's very simple to print, quick and you'll have fun breaking the egg to find the surprise! No support is needed, choose your favorite color and start printing!!! Happy printing and happy Easter to everyone! Follow me if you liked it and leave a like!!

easter bunny surprise egg

Holidays

LoboCNC

This simple disc launcher prints quickly and easily in a fun kit card format. Just snap a disc into place and the launch it by pushing it forward through the gap in the fork. It flies surprisingly far! I've also included a plate with the separate parts if you want to print them separately, or for when you (inevitably) lose the discs.&nbsp;Assembly The launcher consists of just 3 parts: the springy launching fork, the two-fingered grip, and the thumb pusher. To assemble, first put the pusher piece over the grip as shown in the 2nd photo. Then tilt the fork into the rear hook as shown in the 3rd photo. Finally, just snap the fork flat, locked into place by the front hook as shown in the 4th photo.&nbsp;To load the disc, pull the plunger all the way back with your thumb, and then tilt the leading edge of the disc into the front inside edge of the fork as shown in the 5th photo. Then push it flat against the backstop on the plunger as shown in the last photo. Now you're ready to launch!&nbsp;Credit: There are a bunch of similar disc launchers, but the earliest design I could find of this type was from <a target="_blank" href="https://www.thingiverse.com/thing:578799/files" rel="nofollow noopener">davedelay on Thingiverse</a>. Let me know if you know of an earlier version.

Flying Saucer Launcher

Paxton's Prints

Maker1O1

Originally made by squinn and published under CC-BY-NC-SARemixed for AMS, and reworked scaling by me.

Cute Baby Turtle articulated AMS or single color

Jensine's Prints

snakegreen88

I generated a 4 color STL of the snake decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints. The print details and layers filament changes are in the describe note file as well as bellow. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Polylite Black Transmission Distance: 0.3 Polylite Azure Blue Transmission Distance: 3 Polylite Aqua Blue Transmission Distance: 3 Polylite Cloud White Transmission Distance: 6Swap Instructions: Black until layer #6 at 0.56mms Azure Blue until layer #12 at 1.04mms Aqua Blue until layer #20 at 1.68mms Cloud White until layer #23 at 1.92mms The slicer software i used was Bambulab and the printer is the Bambu X1 carbon with AMS&nbsp;keep and eye out if your interested in more HueForge models I plan to upload many more Thanks&nbsp;

HueForge Snake

Hueforge

JamesThePrinter

Your cat must move the sliders to uncover treats. The wells are deep enough to fit most treat sizes or a few pieces of food. Your cat can either eat the treat directly from the well or use their paw to remove it. Two slider designs are currently available - plain or ladybug. Once 3 sliders are placed on the base, simply place the top in position and gently press down to snap it in place.&nbsp;<h5>Print Settings</h5>Although no special settings are required, a higher infill percentage is helpful to add extra weight to the print. This will make it easier for your cat to move the sliders without the entire toy sliding around. If printing the ladybug sliders, use a color change for the last 0.4mm.&nbsp;<a href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Prusament Azure Blue PLA</li><li>Polymaker PolyTerra Lava Red PLA</li><li>Polymaker PolyTerra Charcoal PLA</li></ul>

Cat Treat Toy

Pets

3D design shop

Place your favorite flower in the vase and let the organic design create a beautiful centerpiece in your space. &nbsp;The model can hold water.&nbsp;I Will All so upload af spiral mode 3mf for faster time, but that Will not Hold water.&nbsp;The vase is 179 mm in height and 146 mm in diameter.

AuroraCurve Vase

Decor 

3DPrintable.art

<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>Adorable articulated teddy bear, perfect for a toy, a gift or a decorative item. This bear can stand up and sit down, and its arms and head can move. &nbsp;Works well in single or multi-color prints. Be creative and share your results!&nbsp;Don't be scared but printing this model will require supports:<figure class="table" style="width:95.8%;"><table class="ck-table-resized" style="border:0px solid hsl(0, 0%, 100%);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2023-12-30_3820f9457a368.jpg"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">An example of a finished print with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:70.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border-style:solid;border-width:0px;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously. &nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border-style:solid;border-width:0px;"><figure class="image image_resized" style="width:80.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-02_0dbb0bcdbe4e8.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid hsl(0, 0%, 100%);"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:80.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_1ecd40b55155e.png"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Articulated Teddy Bear (print-in-place)

Toys

TotalChaos

Due to requests I have now created the Tidy System Top Caddy This unit is designed to keep all your most used items on top of your Tidy System for easy access. The Caddy Consists of the below dedicated slots 1. 1x Super Lube holder 2. 2x Glue Stick holders 3. 2x Bambu Scraper holders 4. 5x USB Stick Holders 5. 5x Micro SD Holders 6. 5x Snippers/Pliers Holders 7. 7x SDHC Memory Card Holders 8. 1x Space for odds and bobs The Tidy System can be found using the link below: <a target="_blank" href="https://makerworld.com/en/models/71878#profileId-76020" rel="nofollow noopener">https://makerworld.com/en/models/71878#profileId-76020</a>&nbsp;Hope you enjoy :)

Tidy System Top Caddy - For Your Quick Access Tools

Organization 

NC-Designs

Mickey Mouse Keychain for your keys! Please see my print profile which has the color swap already set up and takes less than 20 minutes to print!