Ckalp

喵喵mya

层高0.1，首层0.1， 100%填充打印 标签区域尺寸为30mm*40mm,2mm圆角&nbsp;原始文件中有F3D文件，可以使用Fusion360进行二次创造&nbsp;色卡本身需要需要使用0.1的层高，起码要保证首层是0.1层高，100%填充，收纳盒对打印配置要求不高，默认即可，盖子推荐使用透明PETG材料打印&nbsp;为了适配gridfinity，添加了一个长度更短的版本，这个版本的收纳盒附带了gridfinity的模块，底部可以预留了4x2mm的磁铁的槽位，如果不需要这个模块，也可以将它移除&nbsp;&nbsp;0.1mm layer,0.1mm first layer,100% infill&nbsp;The label area size is 30mm*40mm with 2mm rounded corners&nbsp;Click the Raw Model Files button to download the F3D file, Edit with Fusion360&nbsp;The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing&nbsp;To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/316654/2023-12-28_d7e7bab1f51b.png"></figure>

打印耗材色卡 Filament Sample Card 

Imp3D Util

ThreeD-Michael

This is an enlarged version of my <a target="_blank" href="https://makerworld.com/en/models/62629" rel="nofollow noopener">“Sturdy Soap and Shampoo Dish”</a> with more room for shampoo bottles and soap bars.Inside dimensions: 156 x 76 x 22 mm.There are versions for 18, 20, 22, 25 and 28 mm shower rails.&nbsp;Assembly:Please follow the scheme above (last picture).The hooks (for washcloths ) are optional. They attach with a screw thread, and depending on your print configuration, once tightened, they may not line up as properly as in my photos. This can be corrected in a number of ways:<ul><li>if the hook rotates too far, it can be fixed in the right position with some glue in the thread,</li><li>if the hook does not rotate far enough, sanding down a few hundredths of a millimeter at the end of the screw may help,</li><li>another alternative would be (when printing the hook) to vary the "X-Y Contour Compensation" parameter in Bambu Studio by a few hundredths of a millimeter for a tighter or wider fit.</li></ul>Please also check out my other <a target="_blank" href="https://makerworld.com/en/u/77030249/collections/88971" rel="nofollow noopener">designs for your bathroom</a>.

Extra long Shower Shelf for Shampoo and Soap

Salle de bain

Defense

ShakaStudio

Textured Faces Series :Stoned : <a target="_blank" href="https://makerworld.com/en/models/45876#profileId-47671" rel="nofollow noopener">https://makerworld.com/en/models/45876#profileId-47671</a>Sliced : <a target="_blank" href="https://makerworld.com/en/models/93257#profileId-99667" rel="nofollow noopener">https://makerworld.com/en/models/93257#profileId-99667</a>Stoned Again : <a target="_blank" href="https://makerworld.com/en/models/116838#profileId-125606" rel="nofollow noopener">https://makerworld.com/en/models/116838#profileId-125606</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346291/2024-01-02_a32aada044af5.jpg"></figure>&nbsp;This model has been carefully designed to look great with 3 colors or 4 colors. Only filament swaps! No AMS necessary.&nbsp;This does not need an AMS to print, but it does make it easier.If you have an AMS, print directly from the provided print profile.If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm&nbsp;3 Colors :Start with Black At layer #9 (0.88mm) swap to Grey At layer #20 (1.76mm) swap to White for the rest.&nbsp;&nbsp;4 Colors :Start with Black At layer #9 (0.88mm) swap to Grey At layer #15 (1.36mm) swap to Tough Cream/ Vanilla Cream At layer #20 (1.76mm) swap to White for the rest.&nbsp;

Sliced - Hueforge Filament Painting

Hue Forge - Filament painting

Waikikiprod

<h3> ENGLISH (En français plus bas) </h3>Discover this small articulated tank printable directly without support ! Its wheels and the turret can rotate !<figure class="image image_resized image-style-align-right" style="width:31.5%;"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_mtpzli09rih9.jpg"></figure>This model needs to be printed on the right side, a support for the barrel is already integrate.An ingenious system will allow you to print the pivot link of the turret without any supports.Before printing you must ensure that :<ul><li>Your bed level is well adjusted and cleaned</li><li>Your cooling is sufficient</li></ul>If you break the wheels of the tank you can print the <a target="_blank" href="https://www.printables.com/fr/model/454359-spare-wheel" rel="nofollow noopener">spare wheel created by Bubutech</a>This model is inspired by the superb work of <a target="_blank" href="https://www.printables.com/fr/social/16057-agepbiz/models" rel="nofollow noopener">agepbiz</a> and its famous print in place vehicles.&nbsp;Variations are available : <figure class="table" style="width:96.54%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/fr/models/13845?profileId=13638" rel="nofollow noopener">Multicolor Version</a></td><td><a target="_blank" href="https://makerworld.com/fr/models/13843?profileId=13637" rel="nofollow noopener">M1 Abrams print in place</a></td><td><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place !</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13845?profileId=13638" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_d1d5b4e3047de8.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13843?profileId=13637" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_bf88528f0493a8.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_e3c5e70492a2c.png"></a></figure></td></tr></tbody></table></figure>&nbsp;Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure><h3> FRANCAIS </h3>Découvrez ce petit tank articulé imprimable directement sans support ! Ses roues et la tourelle peuvent tourner !Ce modèle doit être imprimé sur le côté droit, un support pour le canon est déjà intégré.<figure class="image image_resized image-style-align-right" style="width:30.49%;"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_jqardfay1afr.jpg"></figure>&nbsp;Un système ingénieux vous permettra d'imprimer la liaison pivot de la tourelle sans aucun support.Avant d'imprimer, vous devez vous assurer que :<ul><li>Votre niveau de lit est bien ajusté et nettoyé</li><li>Votre refroidissement est suffisant</li></ul>Si vous cassez les roues du tank, vous pouvez imprimer la <a target="_blank" href="https://www.printables.com/fr/model/454359-spare-wheel" rel="nofollow noopener">roue de secours créée par Bubutech.</a>Ce modèle s'inspire du superbe travail d'<a target="_blank" href="https://www.printables.com/fr/social/16057-agepbiz/models" rel="nofollow noopener">agepbiz</a> et de ses célèbres véhicules imprimés en place.Variations are available : <figure class="table" style="width:96.54%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/fr/models/13845?profileId=13638" rel="nofollow noopener">Multicolor Version</a></td><td><a target="_blank" href="https://makerworld.com/fr/models/13843?profileId=13637" rel="nofollow noopener">M1 Abrams print in place</a></td><td><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place !</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13845?profileId=13638" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_d1d5b4e3047de8.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13843?profileId=13637" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_bf88528f0493a8.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_e3c5e70492a2c.png"></a></figure></td></tr></tbody></table></figure>&nbsp;Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Tank toy - Print in place !

Maquettes

mathieu.hebert

Have fun determining what perimeter offset you need for your close fit assembly.  Ps; The offsets (0.05, 0.10, 0.15 …) are on the radius, the total gap

TOLERANCE TEST 0.05MM INCREMENT

Test

Settlers

A cute little Kitten figure&nbsp;You can find more <a target="_blank" href="https://makerworld.com/en/@Settlers/collections/1109767" rel="nofollow noopener">similar models here</a>&nbsp;Feel free to share photos of your prints!&nbsp;<figure class="table"><table style="border: 3px dotted rgb(153, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">These cute models are self-made creations which are free to use in any way you desire. Enjoy!</td></tr></tbody></table></figure>&nbsp;&nbsp;

Cutie Kitten

Figurine

pietro.cailotto01

I made this piece to facilitate the alignment of the pei plate for the neptune 4/4pro printers. You just need a little glue to glue it to the bottom of the plate. It is low to make sure the nozzle doesn't hit it. I made it full length to have more grip with the glue and to make sure it would stay in place over time, which wasn't the case with the simpler separate corners.

Neptune 4 corner plate

MOD & Tools - Elegoo N4P

Atreides

coat of arms of the Russian empire

coat of arms of the Russian empire

Deco Mural

neddy990

<h2>Knife Cat Keyring / Magnet / Wall Art</h2>Prints face down, I've also included a larger model without the hook/loop which can be used as a fridge magnet or scaled larger for wall art, do not scale the Z axis.&nbsp;I used flexible magnetic paper on the back of the larger print to turn it into a fridge magnet.

Knife Cat Keyring / Magnet / Wall Art

Magnet

Makidev

They are many metric bolt models out here, but not much imperial ones, so here&#39;s some!&nbsp;This is a kit of 3D printable bolts and nuts. I made sure that the fit was good between the bolt and the nut, but I also made sure you could use a 3d printed one on a metal one. &nbsp;I&#39;ll add more length, sizes and nut types over time, but let me know in the comments if there is one you&#39;d like me to add to the presets and I&#39;ll prioritize it.&nbsp;I&#39;ll include the f3d files in case you want to customize it, but appologies in advance, for some reason, I decided to use millimeters instead of inches.&nbsp;UPDATES:2024-05-18: Some files were mixed up. I deleted, re-uploaded and reorganized them.

Imperial bolts and nuts

Quincaillerie

Ben Brandt

If you like this fidget toy, check out my improved <a target="_blank" href="https://makerworld.com/en/models/453711" rel="nofollow noopener">4-button Quad Toggle fidget</a>! PopKeys is a “toggle” fidget with a mechanical twist… Pressing any key will release any/all other keys. Pressing the key down far enough will lock it down into place. Try pressing different combinations to lock down one, two, or all three keys, then press again to pop them back up. Good noisy fun for the key-pressing fidgeter.&nbsp;This was inspired by old cassette tape players, where pressing one play control button would release another. I always enjoyed that mechanism, so I designed this fidget toy around that concept.&nbsp;Most of the parts (except springs) work well with PLA. PLA parts seem to move with less friction. The mechanism is driven by all 3D-printed springs, one to keep keys locked down, and a larger spring under each key. The springs work best when printed in PETG as the material is naturally more “springy”. PLA can work OK, but if pressed down too long they may not bounce back to their full height.&nbsp;Assembly is simple and requires no tools or extra hardware (see the animated GIF assembly video included in the post&#39;s images).

PopKeys - The Triple Toggle Fidget Toy

Gadget

nicodeimos

Ring hole: 4.8mm.Model size: 32mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Rammstein and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Bands Rammstein keychain

Porte Cle

Cj 3DPRINT

Works with LED Lamp Kit-001 bambu lab. <a target="_blank" href="https://eu.store.bambulab.com/fr-fr/products/led-lamp-kit-001" rel="nofollow noopener">https://eu.store.bambulab.com/fr-fr/products/led-lamp-kit-001</a>Size XYZ : 120/120/160&nbsp;I printed it in :<ul><li>Polymaker PolyTerra PLA marble white for up </li><li>PLA BAMBU LAB Brun latte mat (11800) for base</li></ul>&nbsp;Please put a like it&#39;s always a pleasure and follow me and sharing your prints 🙏🙏🙏.&nbsp;Printing instructions :use my print profil0.2mm layer height2 walls10% infillno support

Lamp LowPoly LED Lamp Kit-001

Lumiere

user_2195532720

After three revisions and constant design trial and error corrections, this cute refrigerator magnet is now released. You need to use a 5mm*3mm round magnet, which can be purchased on Amazon.

Cute cactus plant potted refrigerator magnet

Pot Plante

Halfway_Engineered

This credit card sized tool allows for measuring of metric screws and nuts, and includes a built in protractor. Additionally, the four corners are marked for filet radiuses between 1 and 4mm.&nbsp;Print the top 0.4mm in a second color if you would like contrasting labels.&nbsp;Pairs nicely with a <a target="_blank" href="https://makerworld.com/en/models/227005" rel="nofollow noopener">US imperial screw gauge</a>&nbsp;If this design is helpful to you, consider checking out <a target="_blank" href="https://makerworld.com/en/u/138618028" rel="nofollow noopener">my other free models</a>

Metric screw and nut gauge card with protractor

Outils

PadLab

Hi there,this part can be used to help you hiding cables. Use double sided tape and a zip tie.

Zip tie mount

Attache

T3D Objects

Flowers pen holder/ toothbrush holder or anything else you would like to use it for!

Flowers pen holder/ toothbrush holder

Bureau

T.giovanzana

New pen/tools holder for your desk!&nbsp;Glue the grenade to the stand for a better stability or it may fall down (it depends to the pen or tools you put inside)&nbsp;I recomend to print the grenade in military green as my pics.Choose the stand you prefer, single or multi color.&nbsp;You may also like:<a target="_blank" href="https://makerworld.com/en/models/490558" rel="nofollow noopener"></a> <a target="_blank" href="https://makerworld.com/en/models/419407" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458424/design/2024-04-24_ba5e02b80ac75.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/434889" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458424/design/2024-04-24_ec655a8400992.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/423547" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458424/design/2024-04-24_9c2b130036c3.webp"></a>

Grenade MK2 pen/tools holder with stand

Organisation

Fyrby Additive

V-Spooler

Bobine Spool

Kit Crafters

<h2>Customizable Prize Wheel!</h2>Create your own fun with this Prize Wheel that incorporates <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">Make My Sign</a>! This spinning attraction features 8 slots for you to put in your own custom prizes/punishments and is fully assembled without glue or tools. 3D printed screws and threads connect everything together securely and everything is printed without supports.&nbsp;This model was designed with the A1 mini in mind, and so the pieces have been created to be printed by any Bambu Lab printer. Here are the following parts you need to print, if you don't want to use the provided profiles:<ul><li>4x Wheel Quarters</li><li>16x Screws</li><li>8x Connectors</li><li>3x Long Screws</li><li>3x Nuts/Threads</li><li>1x of every other file provided</li></ul><h3>How to Make a Symbol Sign:</h3>Below is an image on what the base of the sign should be. You'll need to adjust the size of the sign to be 50mm x 50mm. The other size/dimension settings should stay the same, while the color and imagery are completely up to you!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/202953/2023-11-25_692351e883ebd.png"></figure>If you have any questions, please let me know; I really appreciate all the support I've gotten here. Feel free to comment/message me if you have any ideas for models!&nbsp;Enjoy spinning away the night!

Customizable Prize Wheel

A Voir

lefty3d

dont worry be happy lightbox&nbsp;check my patreon for commercially use

dont worry be happy lightbox

Weed

Madtrap

I couldn't find any good stem splints near me so decided to design my own. This modular stem splint will fit your plants from seedlings to harvest. Use these splints to plane your plant (super cropping) without hurting or damaging the stem. This will reduce the stress of the plant instead of other methods used in the community.&nbsp;What is in the file:<ul><li>70 deg Splint</li><li>90 deg Splint</li><li>4mm hook</li><li>6mm hook</li><li>8mm hook</li></ul>How to assemble: Use 1 splint and attach 3 hooks on it with middle hook facing toward the angle. Repeat.Alternatives: If you want to use this on BIG or small seedings, scale down the print to the size that fits your needs. Do a test print to check if the tolerances are good enough. 3D printing settings:Printer: Bambulab p1p Filament: Pla Layer height: 0.2 mm Infill: 10-15% No support No brim (unless you have issues with bed adhesion) Me and my brother spend time on this for our own enjoyment and just want to share our work with the community.If you like any of our models we would appreciate a comment or upvote on the model you like. Also, always feel free to contact us if you have any suggestions for new or current models. If you want to buy us a coffee use our <a target="_blank" href="https://paypal.me/madtrap" rel="nofollow noopener">Paypal</a>

Super cropping (Stem Splint)

Grow

FlorinV

Update 08.12.2023: Thank you all for the appreciations! Because of that, I worked on a version with folding temples. Here is the new improved model for who wants them folding (and other changes, like one plate print with embedded logo, a bit more strength etc):<a target="_blank" href="https://makerworld.com/en/models/86474#profileId-92689" rel="nofollow noopener">https://makerworld.com/en/models/86474#profileId-92689</a>&nbsp;Enjoy !<ul><li>easy and fast to print</li><li>easy snap in of the temples</li><li>smooth fit on the nose</li><li>You can see through them, but looks all black</li><li>THUG logo :)</li></ul>&nbsp;

Thug Life Glasses 

Fun Humour

m-holler

This design is by mohammad reza taherizad and I have printed this with all my 3D printers so far because I just love this model. I created a .3mf file because the original .stl files had some errors. Thanks again to: <a target="_blank" href="https://www.thingiverse.com/taherizad/designs" rel="nofollow noopener">https://www.thingiverse.com/taherizad/designs</a>

heart hand love hand

Déco

sam2803

adaptation of gridfinity top tool cover to support two top loaded spools.