Riffcat

This Headset Hanger fits desks from a height of 5mm to 40mm. Use the Long screw for desks thinner than 18mm.I printed it with a 0.4mm nozzle and a layer height of 0.2mm with PLA on My Ender 3 which worked well for me. Also, I wouldn't use supports as they may mess up the threads and the threads print well without them. I would recommend printing this with more infill than standard prints for rigidity. Some people may need to do some trimming or sanding to fit the thread into the hanger as it is a tight fit but it is designed like that so it is secure. The maximum headset width is 4cm which is enough to fit most headsets like my SteelSeries Artis 1. Also, I would print the threads without supports as they are hard to remove and it prints just fine without them. I have also shared this design on Printables.com for convenience <a target="_blank" href="https://www.printables.com/model/361953-headset-hanger-v1" rel="nofollow noopener">https://www.printables.com/model/361953-headset-hanger-v1</a>. By the way if you can see any issues with this design or anything that can be improved then please tell me your ideas in the comments section as I read all of the comments on my designs. Thank You.UPDATE (V1.5) I have kept the thread the same so that if you were struggling with the screw before, you can keep the thread and print a new screw. I have adjusted the tolerance on the screw and have moved it by 0.1mm which will make a huge difference while still keeping snug. I have shown some images of the changes I made to the screw which may be helpful to some people. I have also added the CAD fusion files to this design with both new screws so people can make remakes of this design. Thank you for the support and feedback.

Headset Hanger V1.5

Useful

mail.iou

update 04/05/2024If you want a printing method that is easy to maintain, you can consider my redesign:Reverse Blade Collapsing Katana - Rurouni Kenshin<a target="_blank" href="https://makerworld.com/en/models/414234" rel="nofollow noopener">https://makerworld.com/en/models/414234</a>&nbsp;update 01/12/2024 This knife is a one-piece printed design. If you are not sure whether the filament you bought can print this work well, you can refer to my new creation &#34;Nichirin Samurai Sword&#34;. This work uses a split printing design to facilitate future maintenance and blade replacement. Nichirin Samurai Sword : <a target="_blank" href="https://makerworld.com/en/models/135353" rel="nofollow noopener">https://makerworld.com/en/models/135353</a>&nbsp;Reverse Blade Sword miniThis is a smaller version of the Reverse Blade Sword, with a total length of about 80cm, suitable for A1 mini printers or people who don’t want to print too much. If you want to experience the full size, please go to <a target="_blank" href="https://makerworld.com/en/models/111322" rel="nofollow noopener">https://makerworld.com/en/models/111322</a>&nbsp;Notice It is recommended to use PLA+ and Textured PEI Plate for printing. If the viscosity of the plate of your 3D printer deteriorates, be sure to use glue to increase the grip to prevent the printed part from falling off halfway and wasting filament.After printing, please remove the support at the end of the knife.<figure class="table" style="width:77.33%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-29_51c8c09c32f62.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-29_60e68ce20b26b.png"></figure></td></tr></tbody></table></figure>Repair of fallen blades This work has been printed and verified on P1S, A1, and A1 mini printers and resized. It is currently tested using three materials: Bambu PLA, eSUN PLA+, and eSUN ePLA-Matte. The blade surface can be freely expanded and contracted without falling off. However, since PLA material is not resistant to high temperatures, if it is stretched and swung back and forth many times quickly, it will cause the blade to be heated and expand, causing the blade to be thrown out. At this time, you can repair it with a simple method. Please use a tape with high viscosity that is not easy to fall off, such as Acetate Cloth Tape. Stick it on the entrance where the blade falls off. The amount of tape can be adjusted to increase or decrease the size of the enlarged hole. Then push the blade down and plug it back into the entrance to repair it.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_59e2edca56a86.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_9ae8cbf98f5af.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_75ce6d29cda6e.png"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;

Reverse Blade Sword mini ( Samurai Sword)

Miscellaneous 

soukup273

A construction kit of the fascinating World War II aircraft called the Lockheed P-38 Lightning. Beautiful as a decoration, its colorful appearance complements my other models wonderfully. Suitable as a gift.<figure class="image image_resized" style="width:58.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/608767/2024-02-08_u4ixqicpardw.jpeg"></figure>The P-38 Lightning was a significant fighter aircraft during World War II, thanks to its unique twin-boom design and outstanding performance. With speeds exceeding 400 mph and long range, it was an ideal aircraft for escort missions and long-range reconnaissance flights. Its versatility allowed it to fulfill various roles including fighter, bomber, and reconnaissance missions. The P-38 played a key role in the Pacific Theater and in Europe, where it proved to be an effective interceptor of enemy aircraft. Despite technical issues, the P-38 earned the respect of its pilots and continued to serve in various capacities, including civilian applications, after the war.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/608767/2024-02-08_afw5mgiq55in.jpeg"></figure>Steps to assembly:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Sps2uiRCMvw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Sps2uiRCMvw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;Try my others models:<a target="_blank" href="https://makerworld.com/en/models/169563#profileId-186186" rel="nofollow noopener">https://makerworld.com/en/models/169563#profileId-186186</a><a target="_blank" href="https://makerworld.com/en/models/168532#profileId-185018" rel="nofollow noopener">https://makerworld.com/en/models/168532#profileId-185018</a>&nbsp;

Lockheed P-38 Lightning Kit Card

Vehicles 

Never Disarm

Introducing the Bambu Lab A1 Mini All-in-One Organizer, a meticulously engineered, multi-utility accessory designed exclusively for the Bambu Lab A1 Mini 3D printer. Embodying functionality without adding bulk, this organizer masterfully utilizes unexploited spaces in the A1 Mini's design, maintaining its compact footprint.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/513275/2024-02-07_9ff0fe7e4be94.jpg"></figure>&nbsp;Key Features: 1. Efficient Filament Waste Collector: Positioned strategically under the print bed, the organizer features a spacious filament waste tray. This component efficiently captures multicolor print scraps, ensuring a clean workspace. The tray, magnetically attached for convenience, can be detached effortlessly for quick disposal of waste.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/513275/2024-02-07_409634ef9af72.jpg"></figure>&nbsp;2. Dual Print Profiles: Acknowledging the A1 Mini's size constraints, the organizer comes with two print profiles: one for the X1, P1P/P1S, and A1 printers, and another tailored for the A1 Mini's smaller build plate, ensuring printability directly on the printer it accessorizes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/513275/2024-02-07_ef68986bcf83.jpg"></figure>&nbsp;3. Filament Color Swatches Drawer: A sleek drawer integrated into the main body conveniently stores Bambu Lab's Filament Color Swatches. This feature allows easy access to 80 color samples, aiding in filament selection and organization.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/513275/2024-02-07_78335511007d6.jpg"></figure>&nbsp;4. Accessory Storage Solutions: The organizer boasts two additional drawers. The lower drawer is perfect for neatly arranging the standard accessories provided with the 3D printer, such as the Unclogging Pin Tool and Allen keys. The upper drawer provides space for up to three Hotends, alongside a section for additional accessories like glue sticks.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/513275/2024-02-07_a8e34139671c8.jpg"></figure>&nbsp;5. Scraper Dock: Atop the main body lies a custom-designed dock for the Bambu Lab scraper, ensuring it's always within reach and neatly stored.&nbsp;6. Assembly Instructions: You only need 5 M3 screws to fix the handles and 2 or 4 magnets (optional) to glue in correspondence with the designated slots. Let me know if you need further information, I'll be more than happy to help<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/513275/2024-02-07_fe130ed6e2d15.png"></figure>Advantages: - Space Efficiency: Adheres to the A1 Mini's ethos of minimal space usage, adding functionality without physical bulk. - Ease of User: Magnetic attachments and ergonomic design allow for hassle-free use and maintenance. - Comprehensive Storage: Offers a one-stop solution for all A1 Mini accessories and waste management.&nbsp;

Useful

Miscellaneous

Vehicles

Printer Accessories