Christopher907

Vanadium14

This box is meant to hold 100 sleeved MTG cards (give or take a few) along with a commander in front inside of a top loader sleeve. I also included holes on the sides of the container for magnets (total of 4, 1.66mm thick, 11.95mm diameter) that can be press fit. Holes can be adjusted easily using meshmixer, or I'd be happy to provide the STEP files upon request if you'd like to adjust it in CAD.Edit: The magnets are measured to be slightly smaller than advertised, but nominally they are 12x2mm (<a target="_blank" href="https://www.amazon.com/dp/B07GX7Z4DF/ref=cm_sw_r_apan_glt_i_76C6KBDT2KZJ24RTG00T?_encoding=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.com/dp/B07GX7Z4DF/ref=cm_sw_r_apan_glt_i_76C6KBDT2KZJ24RTG00T?_encoding=UTF8&psc=1</a>)Happy printing!

Magic the Gathering Commander (EDH) deck box

Magic The Gathering

Praus8577

Birthday Crown printed for my niece. Used Sunlu Rainbow PLA

Birthday Crown

Toys

MN Design

Hole Drawing Template&nbsp;This template helps you construct your own models that require mechanical connections.  The vertical grid shows the hole diameter in millimeter increments and the horizontal grid shows the corresponding tenths increments.  This means that every diameter from 1mm to 10.9mm is displayed in tenth increments.  If you print the template with your own printer, you can measure the real diameter based on the print. This makes it easier to achieve the desired printing result.&nbsp;The STL file corresponds to the image from the CAD program.&nbsp;Have fun with your future Projects!

Hole Drawing Template 1-10,9mm

Art supplies 

Sethi84_P1S

<h2>Summary</h2>A plan is to make the complete Armor.(Scrap that)COMPLETE ARMOR IS DONE CLICK THE LINK TO SEE THE MODEL <a href="/thing:2613924" rel="nofollow">https://www.thingiverse.com/thing:2613924</a> Helmet - is ready but will not have enough time till hallows Eve to Print. if any of you guys do Please share the Pics.Render images using Keyshot.Update 1: Added 2 halves of the model for easy printing.&nbsp;

Sauron Armor - Helmet

LotR

elikoll

I think every Super Mario fan has to print this for his Crocs.Show me some pictures of your finished prints.

Super Mario Mushroom Croc Charm

croc charms

JamesThePrinter

<figure class="image image_resized" style="width:35.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-26_de27ba4fb5d07.gif"></figure>This gift box uses a double slider-crank mechanism to lock its lid in place. The mechanism is a simpler version of my <a target="_blank" href="https://makerworld.com/en/models/13129" rel="nofollow noopener">Mechanically Locking Container</a>, but with a Christmas spin (pun intended) that was inspired by <a target="_blank" href="https://thangs.com/designer/frikarte3D" rel="nofollow noopener">frikarte3D</a>. Just rotate the snowflake to unlock the gift inside!Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;Files needed:<ul><li>Lid</li><li>Container</li><li>Outer Linkage (Print 2)</li><li>Mid Linkage (Print 2)</li><li>Inner Linkage</li><li>Snowflake Knob</li></ul>&nbsp;Print SettingsNo supports necessary. Print all pieces in the orientation that they come. Be sure to print 2 mid and outer linkage pieces. If you have issues with mid linkages breaking, PETG may be a better option.&nbsp;Lid Assembly InstructionsWith the lid upside down, insert the inner and outer linkages. The orientation of the outer linkages matter. One face is flat, while the opposite has a slight taper. The flat side should be against the lid. The tapered side should face the container.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-27_zry1fclk9ecl.png"></figure>With the inner linkage in a horizontal orientation and the outer linkages sticking out about 5mm past the outer edge of the lid, the mid linkages should snap into each piece. Some force is required. Be sure that you press them straight down - if they are tilted during pressing, they may snap.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-27_87qjfx0q6vu7.png"></figure>The snowflake knob will need to be glued in place on top of the inner linkage. Place the knob onto the inner linkage and ensure that the linkage moves smoothly. Once happy with everything, use a small amount of glue to permanently connect the knob and inner linkage. If you use too much, it may run out onto the lid and lock everything in place.Tip: If you flip over the entire assembly while drying, glue cannot leak out.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-27_0qpe31eciqrf.png"></figure> <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Dark Red PLA</li><li>Bambu Lab Crimson Red Sparkle PLA</li><li>Bambu Lab Matte Dark Green PLA</li><li>Bambu Lab Bambu Green PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>

Mechanically Locking Gift Card Box

Christmas

Faran3D

<h3>Welcome to my Fallout Nuka Cola Series!</h3>This is a series of replicas of the Nuka-Cola drinks from Fallout with the classic rocket shape and fins, and logos and colors matched to the ones you find in game!&nbsp;Nuka Cola is immediately recognised for its red label with white logo and the brown refreshing beverage it contains. Nuka Cola Caps are a currency in the wasteland, so this is an integral part of any fallout fan or cosplay collection.&nbsp;Printing is absolutely straightforward - no supports or anything is needed and this is an AMS print so little to no post processing is required. I've replaced the Nuka Cola logo on the bottle with a wrapped version and decreased the amount of silver on the cap as it was messy.&nbsp;As with all AMS prints it is more economical to print several copies rather than just one, so print a few copies at the same time and use them to decorate several places or give away a few!&nbsp;Please like and rate this print, your support is appreciated!

Fallout Nuka Cola AMS Bottle and Cap

Fallout

teddi.stanescu

Toploader and slab holder for pokemon cards.Tested with PSA, CGC and cardmarket slabs.

Pokemon card PSA CGC etc slab holder + toploader holder

Whadup

Items you need:<ul><li>2 x “4mm x 30cm” paracord.</li><li>*4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).</li><li>*2 x “12mm” wiggly eyes.</li><li>Super glue (for the eyes and magnets).</li></ul><blockquote>*If you do not have wiggly eyes and magnets, I have included a 3D printed option - Eyes (black and white part) &amp; a Connector.</blockquote>&nbsp;Suggested print settings for the Main Body:<ul><li>Layer height 0.2mm.</li><li>Infill 30%.</li><li>Position the print in a way that the joining face is facing downwards.</li><li>No supports are needed.</li></ul>&nbsp;Suggested print settings for the Eyes:<ul><li>Layer height 0.2mm.</li><li>Infill 15%.</li><li>Position the print (both white and black) in a way that the chamfered side is facing upwards.</li><li>No supports are needed.</li></ul><blockquote>Affix the assembled eye to the main body with the chamfered side of the white part facing downwards.</blockquote>&nbsp;Suggested print settings for Connector:<ul><li>Layer height 0.2mm.</li><li>Infill 50%.</li><li>Perimeters: 5.</li><li>Refer to the image for print orientation.</li><li>No supports are needed.</li></ul><blockquote>Choose the body (both sides of the body are identical) where you&#39;d like the connector piece to stay, and insert the longer end all the way in.</blockquote>&nbsp;&nbsp;Changelog<ul><li>7 Nov 2023: Version 2: Fine-tuned the magnet inset cavities. No changes to the print orientation or support settings.</li></ul>&nbsp;For more interesting zipper pull charms, be sure to track this tag (<a target="_blank" href="https://www.printables.com/search/models?q=tag:zipperrific" rel="nofollow noopener">Zipperrific</a>).&nbsp;We&#39;ve even conjured up a little <a target="_blank" href="https://makerworld.com/en/models/39927" rel="nofollow noopener">home</a> for our zipper pulls – because they deserve a stylish rest when they&#39;re not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They&#39;re not just zipper pulls; they&#39;re your new tiny, table-top pals! 🌟<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000039919/design/2023-10-13_g3jwdujm5upu.jpg"></figure>&nbsp;NOTE Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.

Zipper Pull - Ghost (Pac Man)

Nifty

printchallenge

I modelled and printed some pikmin characters and used them to show the difference between resin, FDM and multi material printing.For more info on how I printed them you can watch this video:&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/RSrX33Ppvew"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RSrX33Ppvew" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;

3 Pikmin Characters!

nintendo 

vellanix

This is a IKEA Skadis board that fit on A1 Mini.The size is 180x180

IKEA Skadis board for A1 mini

organization 

Jangyy

<div><h1>Summary</h1><div>Design to use TPU 95 filament.In Cura set the infill to 10%, pattern to concentric, outer walls to 3. To get a more rubbery turkey</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>Yes</div></code></pre> Resolution: <div>200</div> <pre><code> Infill: <div>10</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=ESUN+TPU+95" target="_blank" rel="nofollow noopener"> ESUN TPU 95 </a><pre><code> Notes: <div>In Cura set the infill to 10%, pattern to concentric, outer walls to 3. To get a more rubbery turkey</div></code></pre></div>

Sleeping Turkey (Bath Toy)

Thanksgiving

TheBasedDoge

Subaru Keychain - AMS Ready

key chains

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

Cable Chain PTFE Clip for X1. P1P, P1S 

Bambu Lab

Filar3D

A super cool and Stylish case with a 3D printed Sliding mechanism. I use it for sunglasses, but it can be used for anything.&nbsp;Does not need supports.

Fully 3D Printed All purpose Sliding Lid Case

container 

agepbiz

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=jj3vnPYccS4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/jj3vnPYccS4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Simple and clean looking Xbox Controller Standfits 8x3mm anti slip rubber pads (optional)&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;Printsettings: No raft Support Structures for best results where the rubber pads are 0,1-0,2mm layer height

Minimalistic Xbox Controller Stand

Xbox

IndomReps

Milwaukee M18 Tool and Battery Mounts&nbsp;*** Update 1 - 10/28/2023 ***<ul><li>Revised tolerances of model so that fit is a little bit looser and releases from the battery a lot smoother.</li><li>Revised thickness of batteries mounting face so that the larger High Output batteries can be mounted flush to a surface without the battery interfering with the mounting surface.</li></ul>&nbsp;Tool mount will work with most tool types, intended to be underhung mount but can be side mounted if it suites a certain tool. The battery mounts will work with any M18 battery and can me mounted in any orientation as it uses the batteries locking mechanism to hold it into place. Use 2 #8 screws to attach them to whatever you want.&nbsp;I've printed these out of PLA and Pro PLA with no issues with strength but might want to use PETG or ABS if you want to use these in something like a work truck or other environment that might get really hot in warm weather.

Milwaukee M18 Fuel Tool & Battery Mounts

shop

nkopman

This is a work in progress scx24 chassis.It has a slight angled skid and fully customizable skid plate angle to allow better break over angle.There is a version for all wheelbases ( I have not tested the deadbolt or gladiator version)Its fully printed and based of of original mofo rc ugly af chassis

Scx24 Lcg chassis

RC cars

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>