ChristianRH

Madre

Jardin

kriativu 3D

keychain spiderman

Llaveros

krazi201

Some simple "Star Wars - Grogu” earrings (might work as keychain as well → would use PETG instead of PLA in that case).&nbsp;Please use my print profile and a 0.2 nozzle to get a decent result.Print on textured plate to have a nice surface finish.&nbsp;The colored layers are only 0.5mm in total to keep down printing time.As a result of this you might see black shadows through bright surface colors from black top layers (1mm in total).If you like to have brighter colors just change size/ratio of assembled objects as you wish.

Star Wars "Grogu" Earrings

Aretes

EDDIEB3D_

.2 layer height needed for best resultsColors usedElegoo BlackSunlu Yellow

Suspended Batman Logo 

Batman

Codyinbody3

I've had a ton of you reach out asking what I use to hold/mount my helmets on my wall and I designed this to hold my helmets on the wall.&nbsp;To get a good grip you can either print the top portion (half ball) in TPU or do it the easy way I did it and use a couple strips of electrical tape to give it good friction. Enjoy!

Helmet Hanger Mount

Repisas

Tejidos

Can be scaled up but not down..2 layer height required for best results&nbsp;

Superman String Art

String Arts

Superman

Cillu

Model made by me on siemen NX, they are two pieces, which must be made on different plates. I didn't use any brims or supports, I used 0.16 as layer but it can also be made with other thickness. Container volume: 220x120x70mm.&nbsp;-&nbsp;Check out the smaller version of the tissue box <a target="_blank" href="https://makerworld.com/en/models/151747" rel="nofollow noopener">https://makerworld.com/en/models/151747</a><figure class="image image_resized" style="width:31.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/509724/2024-02-01_5ea9e5e3509c9.jpg"></figure>

Tissue Box Brick (Big version)

Cajas

primewelder

Deadpool paper towel holder in the style of l3go man. can free stand on the bench top of mounted to ta wall using the bracket.&nbsp;if you would like to sell my design please sub to my pateron account

Deadpool paper towel brick man holder

Baño

jakubhroch

Contains 2 versions<ul><li>AMS ready fro multicolor print</li><li>STL version for classic layer color change</li></ul>

Harry Potter - Remus Lupin keychain - 4 colors

Harry Potter

Lucky 13 Toys

<h3>Dummy 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product. Too many people are doing that already!&nbsp;Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;Yes, Dummy 13 is now on MakerWorld.&nbsp;<h3>Please read before printing:</h3>This is a work in progress. It has been collecting virtual dust while I work on other projects, so I've decided to release it now in a “beta” state. I don't have a timeline for when the final version will be finished, but the current files are fairly complete - just lacking some perfectionist polish. Please understand that there is some room for improvement here. I welcome your feedback to help make this design the best it can be.&nbsp;What's finished right now: Design of all parts, except for minor tweaks based on feedback. Basic instructions.&nbsp;What's not finished: Parts on runners for better adhesion without brims. More detailed instructions. Fusion 360 and STEP files for Printables Club members (please note that these will not be available until the design is finalized). Any updates based on feedback.&nbsp;Can I sell it? Yes, Dummy 13 is distributed under a CC BY 4.0 license that does allow commercial use, provided that you provide proper attribution.&nbsp;If you'd like to say thanks and help support future development, you can make a one-time donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here</a> :)&nbsp;---&nbsp;<h3>Introducing Dummy 13!</h3>(…working title.)This is another variant on <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>, and I actually started designing it before <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13</a> or <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13</a>. As you can probably tell, my goal here was to bring some more humanlike proportions to the figure, while also improving the way everything fits together.&nbsp;My hope is that this will be an easier print than the original Lucky 13, though still a step up from Mini and Easy.&nbsp;<h3>Printing</h3>As with the original, Dummy 13 is made up of an inner "frame" with a layer of “armor” over top. You can use the material of your choice for the armor, but you should print the frame with a strong and sturdy material like ABS, ASA, or PETG. I mostly use ASA.&nbsp;PLA is not recommended for the frame. If you print the frame in PLA and complain that it broke or went floppy, I'm going to be like, “yeah dude, I told you not to.”&nbsp;All parts print without supports and you should not need to reorient anything. Bed adhesion is the toughest part of this print. For better adhesion try slowing down your first layer, printing external perimeters first, and adding a brim if needed. Use 0.15mm layers (0.2mm first layer).&nbsp;You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself. If a part starts with “2x” or “4x,” print that many copies. There are also a couple extra bits (a simple staff accessory and an adapter for the <a target="_blank" href="https://www.printables.com/model/563861-lucky-13-display-base-20" rel="nofollow noopener">display base</a>) that are included separately.&nbsp;Recommended print settings (100% scale, 0.4mm nozzle)<figure class="table"><table><tbody><tr><td rowspan="2">Material</td><td>Frame parts</td><td>ABS, ASA, or PETG</td></tr><tr><td>Armor parts</td><td>Any</td></tr><tr><td rowspan="2">Layer height</td><td>First layer</td><td>0.2 mm</td></tr><tr><td>Other layers</td><td>0.15 mm</td></tr><tr><td colspan="2">Infill</td><td>20% rectilinear</td></tr><tr><td colspan="2">First layer speed</td><td>25% of default</td></tr><tr><td colspan="2">Elephant foot compensation</td><td>0.15 mm</td></tr><tr><td colspan="2">Supports</td><td>None</td></tr><tr><td colspan="2">Brim</td><td>As needed (depends on bed adhesion)</td></tr><tr><td colspan="2">Additional settings</td><td>☑ Print external perimeters first</td></tr></tbody></table></figure>&nbsp;<h3>Assembly</h3>Follow this video for assembly instructions. Pay attention - some parts look very similar!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Rwu3UP0cHZw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Rwu3UP0cHZw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h3>Customizing</h3>Dummy 13 should be compatible with most handheld accessories made for my other designs. Check out Lucky 13's <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">remixes page</a> for a good starting point!&nbsp;&nbsp;This design has already been stolen and stripped of attribution a hundred times over. Please don't add to that.

DUMMY 13 Printable Jointed Figure (beta files)

Dummy

clavo

Bought some filament of XINGTONGZHILIAN. The spools have a diameter of 18.3 cm and are wound up to the upper edge which causes an issue when the AMS rewinds the filament (filament jumps from the spool).Existing designs waste to much filament. So I have designed a filament-saving (very) tight-fit adapter that increases the diameter to 20 cm. Also added a lip on both inner sides so that it snaps into place.&nbsp;Notes:<ul><li>Printed with PLA (Overture PLA Matte). </li><li>Settings: .2 mm layer hight, .4 nozzle, 4 walls, 15% gyroid infill. → less than 20g per adapter (40g per spool)</li><li>To attach, place the adapter on one side and then press over the spool from both sides.</li><li>And it should be obvious that you need two adapters per spool ;)</li><li>Should also work with other spools that have a diameter of 18.3 cm</li></ul>

XINGTONGZHILIAN Spool (183 mm) Adapter for Bambu Lab AMS

Adaptador

TKB-3D

Windowed AMS Silica Box to see if you need to dry your beadsEasy to fill with the screw on Funnel included in the design&nbsp;-----THE ORIGINAL PRINT PROFILE HAS BEEN THOROUGHLY TESTED WITH MANY FILAMENT BRANDS. IT HAS CUSTOM FIRST LAYER AND OTHER CUSTOM PRINT SETTINGS. I DONT NOT RECCOMEND USING ANY OTHER PRINT PROFILES. ----&nbsp;requires 1.5inch round 1/8 inch thick acrylic disc.  (38mm x 3mm for the metric people)you can buy them here<a target="_blank" href="https://www.amazon.com/dp/B09MFNLKWT?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B09MFNLKWT?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;

AMS Windowed Silica Box

Bambulab

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Brick Stackable Desk Boxes

Fenix3D

Kitty Love Valentine Keychain

Kitty

Quirkys3dprinting

Axolotl keychain

Ajolotle

making with mogel

Sharing this wonderful model from <a target="_blank" href="https://www.printables.com/@FuzzySpuffy" rel="nofollow noopener">Three Dimensions </a>.

Spiderman Keychain - Best With Bambu and AMS

Spiderman

BT3D printing

Multicolor Pikachu in a heart keychain 3mf file for Bambulab printers with AMS. Already colored in Bambu studio, facing down to the buildplate.For commercial license please join my patreon:<a target="_blank" href="https://www.patreon.com/BT3DDeusCat" rel="nofollow noopener">patreon.com/BT3DDeusCat</a>

Multicolor pikachu keychain in a heart

Pokemon

OldSpice3d

Yoshi head keychain, various colors available, just chose the color you want in Bambu Studio

Nintendo Yoshi keychain/keyring

Mario Bross

3DLabHN

a series of keychains from my favorite anime, I have several pending and I will update the publication&nbsp;they are all colored

One piece keychains

One Piece

Indibles

Hello, I would like to introduce you to my L-EGO fridge magnets or other appliances.In the profile, there are added negative parts in the shape of magnets that I used (8x2 mm), thanks to which there will be a hole for inserting the magnet.In the object tab, you can change the size of the negative part according to your magnet. Alternatively, delete my object and add, for example, a cuboid or a cube.&nbsp;I have two versions.&nbsp;1. The version that has holes from the bottom, in which case I recommend giving the exact size of the magnet and pounding it with a hammer, or 0.1 mm larger and sticking it with glue.&nbsp;2. The version that allows for embedding the magnet inside the Brick. In this case, the pause in the profile is set at a height of 2.2 mm (my magnet has dimensions of 8x2 mm). In this case, I recommend using a larger tolerance, I myself used an increase in the opening by 0.2 mm in diameter. Since they will be closed, there is no risk of them falling out and there is no need for glue. Just keep in mind that in this case the magnets have less power.&nbsp;&nbsp;<h3>No need to use supports.</h3>

Brick fridge magnets LEGOS-like

Lego

Just_Josh

Deadpool 3 is coming and Wolverine is back… The merc with a mouth catches some claws to the jaw. Remember the moment with this awesome model that can also hold your headset!

Deadpool and Wolverine bust or headset holder

Stands

Shaggys3D

If you want commercial access please sub to me at Patreon.com/LightBoxGaloreI will be doing the ps5 and nintendo switch ones as well soon when i can get the controllers in hand.Not yet satisfied with the back pieces they still need some adjusting but the front is pretty good now that ive been gaming for a couple days with it for testing with no issues.After printing i rec sanding the holes especially for the joysticks so its smooth and wont damage the joystick.

Xbox Series S/X Controller Faceplate

Controles

glenngri

Classic Star Wars Celebration Design inspired LED lightbox.&nbsp;&nbsp;Setup for a AMS and 2 colours.&nbsp;Colours used:PLA BlackPLA White

Classic Star Wars Celebration Design

Star Wars

PRINT3DGIFTS

Made this perfect fit for the Bambu Lab A1 Mini. Prints without support and only takes one plate! Enjoy and don't forget to post your makes!

T-Rex Skull A1 Mini perfect fit!

Dinosaurios

The_Trap__

Holder for pliers compatible with the Multiboard system. Standard screws with a flat or normal head are still required. I will upload a second print profile with suitable screws. These can also be found on the Multiboard project page: <a target="_blank" href="https://www.multiboard.io/parts-library/bolts" rel="nofollow noopener">https://www.multiboard.io/parts-library/bolts</a>&nbsp;There is also a YouTube video in German about my Multiboard build and my own adapters that I have constructed:  <figure class="media"><div data-oembed-url="https://youtu.be/apn3iB0Im8s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/apn3iB0Im8s" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Deutsch:Halter für Zangen kompatibel mit dem Multiboard System. Es werden noch Standardschrauben mit flachem oder normalem Kopf benötigt. Ich lade ein zweites Druckprofil mit passenden Schrauben hoch. Diese können auch auf der Projektseite von Multiboard gefunden werden: <a target="_blank" href="https://www.multiboard.io/parts-library/bolts" rel="nofollow noopener">https://www.multiboard.io/parts-library/bolts</a>&nbsp;Weiterhin gibt es ein YouTube Video in deutscher Sprache zu meinem Multiboard build und eigenen Adaptern die ich konstruiert habe:  <figure class="media"><div data-oembed-url="https://youtu.be/apn3iB0Im8s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/apn3iB0Im8s" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Multiboard - Pliers Holder

Organizadores

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #11 (0.96mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

One Piece - HueForge

HueForge

Surin Ondro

Superman support your education load :-)&nbsp;Let me know if you need something update.

Madre

Jardin

Llaveros

Aretes

Batman

Repisas

Tejidos

String Arts

Superman

Cajas

Baño

Harry Potter

Dummy

Adaptador

Bambulab

Cajas

Kitty

Ajolotle

Spiderman

Pokemon

Mario Bross

One Piece

Lego

Stands

Controles

Star Wars

Dinosaurios

Organizadores

HueForge

Libros