ChevaTomme

BjörnB

I have had great success with this profiles. Both on Bambu lab TPU-HF and some random noname TPU from amazon that actually handles higher speeds.NOTE: always dry your filament before printing. =)&nbsp;Overture High Speed TPU is confirmed working with this profile.

Bambu lab TPU-HF profiles (Printer and filament)

Bambu Lab settings and profiles

T_WITHE

Welcome! I am pleased to share with you the Gardena quick connector set that I designed in various sizes to perfectly meet different connection needs. The set is available with different threads and sizes:<ul><li>External and internal threads</li><li>Sizes: 3/8&#34;, 1/2&#34;, 3/4&#34;, 1&#34; (M18)</li><li>Traditional BSP thread</li></ul>Material Choice For the best results and long lifespan, I recommend the following materials for printing: PETG, ASA, ABS. PLA can also be used, but I strongly recommend the former materials. Sealing Rings Sealing rings can be printed from TPU material as it is flexible and waterproof. However, for the best results, I recommend using factory sealing rings, especially O-rings, to ensure maximum water tightness and long-term reliability.It&#39;s important to note that high pressure can cause leakage or other issues, so I do not recommend using the connector at high pressure! I experienced slight leakage at 6 bar, so please don&#39;t leave negative feedback because of this. Thank you! For supports, if possible, use support material, or use PETG-PLA or PLA-PETG interface layer mode. Thank you for choosing this 3D printable Gardena quick connector set! I hope you find it useful. If you have any questions, feel free to reach out to me! If you have any suggestions or requests, please contact me. This is a revised version of my original model with some additional sizes: <a target="_blank" href="https://www.thingiverse.com/thing:4904221" rel="nofollow noopener">https://www.thingiverse.com/thing:4904221</a>

Gardena quick connector set

Garden

luckyluc.64

I'm Back with a new Smooth AMS. The Generation 2.This guy is a new design of the same concept to solve several issues.<ol><li>Smooth the jumping of the near-empty spool.</li><li>Reduce the AMS forces required to feed the filaments.</li><li>The PTFE tube acts like a fishing line to keep a smooth and even feeding.</li><li>Reduces the friction.</li><li>Prevent the filament from eating the AMS feeding funnel or anything.</li></ol>&nbsp;What new then?-NO ROOM IS TAKING FROM THE SPOOL.-More compact but still as strung. (4.25g per unit and print 50% faster).-It can be printed in PLA, but I strongly recommend using minimum ABS, PETg, or better.-Yes, you can use any monster desiccant box.But I highly recommend my Desiccant box. You don't need to remove the spool when refreshing it.<a target="_blank" href="https://makerworld.com/en/models/69484#profileId-73827" rel="nofollow noopener">https://makerworld.com/en/models/69484#profileId-73827</a>&nbsp;Additionally, I put a PTFE tube cutter guide. Most of the complaints are that the spool pulls back the PTFE because of an incorrect PTFE length. I hope that will solve that issue.&nbsp;&nbsp;I did all the testing with standard PLA and silk PLA and have failures; please use ABS, ASA, PETg, or better. The ones I print for myself are all clear PETG, printed solid. At low light, they are outstanding. Even better than before.On the PETg, I use "Adaptive layer height"(Adaptive 0.50, Smooth 5, Keep Minimum).There are a few excellent YouTube videos for those who never use that function, and the BBL Wiki is fantastic. Here are the steps needed;-Select one of the Smooth AMS,-Select "Adaptive layer height" (near the middle) on the top menu.-Select "Keep min".-Put 0.50 in the [Adaptive] value box.-Put 5 in the [Smooth] value box.-Click once on [Adaptive] (a green to red bar will appear on the right side of the page).-Click once on [Smooth].-Click slice, and you did it.Here is a screenshot of it before it gets sliced.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/464308/2024-01-07_aea78ed1e55a9.png">&nbsp;Also, In some pictures, there's the material flag. You can get it here: <a target="_blank" href="https://makerworld.com/en/models/113769#profileId-122328" rel="nofollow noopener">https://makerworld.com/en/models/113769#profileId-122328.</a>You should see what else I designed to remove a few other little quirks of the near-perfect Bambu Lab 3D Printers.Enjoy less headache.

Smooth AMS Gen2

Bambulab - AMS

Best Nozzle Wiper-Alternate Wiper by Tomme

Edge Rings for Clas Ohlson spools