Cheetah

HackMan

Flow calibration cube, print it with 0,45mm Extrusion width, vase mode, check the wall with caliper and adjust you flow rate.You need 0,45 width, if your caliper show 0,43, make 0,45/0,43 (your value) = 1,05, so adjust your flow rate to this value.&nbsp;Check my Bambulab collection tool :https://makerworld.com/fr/u/3122702332/collections/188290

Flow Calibration Cube

Kalibrierung - Tests

EngGraph

<h2>Ich bin ein stolzes Mitglied der <a target="_blank" href="https://www.3dd-akademie.de/" rel="nofollow noopener">3D Druck Akademie</a>. </h2>&nbsp;Zwar bin ich kein Anfänger im 3D-Druck, aber ich benötige immer wieder kompetente Unterstützung von Experten und erfahrenen Mitgliedern.<h3>Namhafte Experten stehen dir zur Seite. </h3>Jeder kennt AM3DPro und Stefan von CNC Kitchen. Andreas und Stefan sind nicht nur auf den Werbeplakaten zu sehen, sondern sind jeden Tag aktiv dabei und arbeiten intensiv mit der Community zusammen.&nbsp;In der 3D Akademie habe ich meine Community gefunden. Meine Kollegen und die Experten helfen nicht nur im Bereich 3D-Druck, sondern auch bei 3D-Scan und 3D-Modellierung. &nbsp;Der Umgangston ist sehr freundlich und in den meisten Fällen werden die Lösungen innerhalb einer halben Stunde gefunden.Neben Videokursen gibt es auch Videocalls, bei denen mehr als 500 Teilnehmer alltägliche Probleme im 3D-Druck besprechen und Erfahrungen austauschen können.&nbsp;Dieser Schlüsselanhänger ist für Mitglieder und diejenigen gedacht, die es noch werden wollen. Damit könnt ihr jeden Tag stolz zeigen, welcher professionellen Community ihr angehört.

3D Druck Akademie - Schlüsselanhänger  - Keychain

3D-Druck-Akademie

angrelou

Update 02/11/2024Thank you for your feedback. I've uploaded a new 100% horizontal design so you'll have fewer issues.Optimal tee height for maximum driver and fairway distance2 ¾" tallIf you liked the design, check out my profile and subscribe, you won't regret it.

Classic Golf Performance Tee 

Family

Terminatordeux

<h2>Save the Birds from eating in the trash.</h2>Hello,Birds need to eat too,They comonly eat our trashs and they die of it.“If it's not good for you, it is'nt for them neither”so why don't they like to change sometimes and have some fast food.Here is ma version on a ‘Bird friendly FLY IN’.Very simple to print and set up.No need of an AMS.Printed in Red and Silk gold and white PLA.Please consider to leave a like and a comment, if you print it, i would to see them in action.<img src="https://makerworld.bblmw.com/makerworld/draft/425135/2024-01-19_5e7e45204a839.jpg">&nbsp;The first of a kind is already in use in my garden, and my flying neighboors loves it.

Bird feeder Mac donald's, "FLY IN"

Animals

glenngri

Tool to remove the hitch cover from the rear of a Tesla Model Y

Tesla Model Y hitch tool

TESLA Y

Sylosis3d

I present to you my Christmas Ferris wheel which will brighten up your Christmas decor.She runs on these wheels.&nbsp;You will need 4 608 RS bearings and glue to assemble certain parts&nbsp;for all parts except the decor I advise you to print in 0.2 with 5% infill, this is sufficient&nbsp;A 25x25 plate is necessaryIf you reduce the size of the wheel the bearings will no longer fit&nbsp;11/27: add a V2 of a wheel

Christmass Big Wheel

Christmas

Lechadias

<h2>765 pieces of Corner Brackets</h2>SUPPORT ME ON CULTS 3D! Download the models <a target="_blank" href="https://cults3d.com/en/3d-model/tool/765-pieces-of-corner-brackets" rel="nofollow noopener">HERE</a> I am delighted to present to you this extensive package containing 3D printable fastening elements. These sophisticated and functional components allow us to realize the most creative and practical projects. The package includes a variety of fastening elements in different types and sizes, which can be useful in a wide range of applications.  These 3D printed fastening elements enable us to undertake a wide range of projects at home, in the office, or even in industrial environments. Thanks to the diverse selection, everyone can find the elements that best suit their needs. We can easily locate and apply the elements from the package using the Excel sheet, allowing us to create unique solutions tailored to our own designs.  I trust that this extensive package will provide inspiration and joy to all those seeking to undertake creative and practical projects. Take advantage of the opportunities offered by the 3D printable corner bracket elements in the package and create something unique and enduring!&nbsp;<h3>How to use it?</h3><ol><li>Download all .zip files and extract thats.</li><li>Open the Excel sheet and use filters to find your needs.</li><li>Use Article No. to find your file in the folder.</li><li>HAPPY PRINTING :)</li></ol><img src="https://makerworld.bblmw.com/makerworld/draft/817122/2024-04-04_d41c8767a410e.png">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/817122/2024-04-04_cc863ab8e52f6.png">  <h3>Printing information</h3>Use this position to printing:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/817122/2024-04-04_e87206823334d.png">&nbsp;Nozzle: 0.4mmLayer high: 0.2mmPerimeters: min 4 wallsBottom and Top layers: min 4-5Infill: 20-30%Gap fill: optional, but recommendedSupport: no&nbsp;Filaments: PLA, PETG, ABS, Nylon, ASA&nbsp;<h3>Thanks and follow me!</h3>Thank you very much for downloading and liking. Please follow me so you don&#39;t miss out on the next gigantic packages I&#39;m planning to create!

765pieces of Corner Brackets Vol.1

Haushalt

3Devil

2D pictures to decorate the walls in the home. If you like it, please LIKE and FOLLOW. I will gradually upload more and more created images to the wall.Thanks for downloading and rating.3Devil.

2D decoration 2 cats on window

Cats

mbo-tech

!!! This is not my original model - I just shared it to be available here !!!&nbsp;Thanks goes to Thingiverse user Ilias Barthelemy who designed a Raspberry Pi case that looks like the original Loxone counterpart in order to put our Loxberries into the same cabinet as the existing modules.&nbsp;Assembled example in 3D: <a target="_blank" href="https://a360.co/2L2pgVP" rel="nofollow noopener">https://a360.co/2L2pgVP</a>All parts on one ground: <a target="_blank" href="https://a360.co/2JueaEe" rel="nofollow noopener">https://a360.co/2JueaEe</a>

Loxberry DIN case Loxone

SmartHome

Cookiedeluxe

Remix of the insert design made by <a target="_blank" href="https://makerworld.com/en/u/2587783021" rel="nofollow noopener">chrisb</a> for the fantatstic BaBo organizer by <a target="_blank" href="https://makerworld.com/en/u/24485025" rel="nofollow noopener">Willi 3D</a>.&nbsp;The original design is great, but my caliper didn't fit. I therefore remixed the design by adding a cutout for the thumbwheel and by lengthening the inner canal as much as possible while still staying within the outer dimensions of the original. It fits calipers with a length of up to 237 mm now.

BaBo insert large digital caliper

BaBo - Drawer & Inserts

ABDELat

Fast and easy to print Gridfinity Base for <a target="_blank" href="https://www.ikea.com/at/en/p/alex-drawer-unit-white-00473546/" rel="nofollow noopener">Ikea Alex Drawer (36x70 cm)</a>. The printfile contains 5 plates with all necessary parts for 1 drawer.If your looking for bins, I&#39;ve an <a target="_blank" href="https://makerworld.com/de/models/47599" rel="nofollow noopener">ultimate collection</a> for that.<ul><li>Plate 1<ul><li>Grid 4x5</li><li>23x Connector (22 needed + 1 spare) optional</li></ul></li><li>Plate 2<ul><li>Grid 4x5</li></ul></li><li>Plate 3<ul><li>Grid 3x5</li><li>Grid 2x4</li></ul></li><li>Plate 4<ul><li>Grid 3x5</li><li>Grid 2x3</li></ul></li><li>Plate 5<ul><li>Spacer</li></ul></li></ul>PLA printtime: ~3:55h and 116,9g material (single color)PETG printtime: ~4:25h and 115,0g material (single color)&nbsp;I recommend to put the 2 small grids and the spacer in the back of the drawer.The grid can be printed in PLA or PETG. I recommend 0.4mm nozzle and 0.2mm layer height.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;Source: <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity Base</a> <a target="_blank" href="https://www.printables.com/model/535032-gridfinity-ikea-alex-spacer-with-snap-connectors" rel="nofollow noopener">Spacer</a>&nbsp;<h4>A1 mini Edition:</h4>I&#39;ve included a profile for all A1 mini user out there. Basically you&#39;ll need three 4x4-Grids and three 3x4-Grids. The Spacer is cut in half, so it fits the print plate. You don&#39;t need to glue them together. Just use some connectors. The connectors are optional. You just need them if you don&#39;t fill the drawer space all with bins.<h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.

Slim Gridfinity Base for Ikea Alex Drawer

Workflow

DylansLightBoxes

Mandalorian This Is The Way Light box. Easy to print, one plate for the lid and one plate for the back. Simply add a 1m white led strip and you have a great light box! The hole on the back is designed to fit a 20mm wire grommet (easily found on amazon).

Mandalorian This Is The Way Light Box

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>