WannaRun

It can be securely fastened to the edge of the R3D spool, and its diameter is exactly the same as Bambu spool.It matches Bambu AMS well.套圈可以牢固的贴合在R3D纸盘边缘，直径和拓竹料盘完全一致。能很好的匹配拓竹AMS。

BambuAMS Cardboard Spool Adaptor(R3D)拓竹AMS纸盘套圈R3D版

funny

Lucky 13 Toys

<h3>Dummy 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product. Too many people are doing that already!&nbsp;Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;Yes, Dummy 13 is now on MakerWorld.&nbsp;<h3>Please read before printing:</h3>This is a work in progress. It has been collecting virtual dust while I work on other projects, so I've decided to release it now in a “beta” state. I don't have a timeline for when the final version will be finished, but the current files are fairly complete - just lacking some perfectionist polish. Please understand that there is some room for improvement here. I welcome your feedback to help make this design the best it can be.&nbsp;What's finished right now: Design of all parts, except for minor tweaks based on feedback. Basic instructions.&nbsp;What's not finished: Parts on runners for better adhesion without brims. More detailed instructions. Fusion 360 and STEP files for Printables Club members (please note that these will not be available until the design is finalized). Any updates based on feedback.&nbsp;Can I sell it? Yes, Dummy 13 is distributed under a CC BY 4.0 license that does allow commercial use, provided that you provide proper attribution.&nbsp;If you'd like to say thanks and help support future development, you can make a one-time donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here</a> :)&nbsp;---&nbsp;<h3>Introducing Dummy 13!</h3>(…working title.)This is another variant on <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>, and I actually started designing it before <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13</a> or <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13</a>. As you can probably tell, my goal here was to bring some more humanlike proportions to the figure, while also improving the way everything fits together.&nbsp;My hope is that this will be an easier print than the original Lucky 13, though still a step up from Mini and Easy.&nbsp;<h3>Printing</h3>As with the original, Dummy 13 is made up of an inner "frame" with a layer of “armor” over top. You can use the material of your choice for the armor, but you should print the frame with a strong and sturdy material like ABS, ASA, or PETG. I mostly use ASA.&nbsp;PLA is not recommended for the frame. If you print the frame in PLA and complain that it broke or went floppy, I'm going to be like, “yeah dude, I told you not to.”&nbsp;All parts print without supports and you should not need to reorient anything. Bed adhesion is the toughest part of this print. For better adhesion try slowing down your first layer, printing external perimeters first, and adding a brim if needed. Use 0.15mm layers (0.2mm first layer).&nbsp;You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself. If a part starts with “2x” or “4x,” print that many copies. There are also a couple extra bits (a simple staff accessory and an adapter for the <a target="_blank" href="https://www.printables.com/model/563861-lucky-13-display-base-20" rel="nofollow noopener">display base</a>) that are included separately.&nbsp;Recommended print settings (100% scale, 0.4mm nozzle)<figure class="table"><table><tbody><tr><td rowspan="2">Material</td><td>Frame parts</td><td>ABS, ASA, or PETG</td></tr><tr><td>Armor parts</td><td>Any</td></tr><tr><td rowspan="2">Layer height</td><td>First layer</td><td>0.2 mm</td></tr><tr><td>Other layers</td><td>0.15 mm</td></tr><tr><td colspan="2">Infill</td><td>20% rectilinear</td></tr><tr><td colspan="2">First layer speed</td><td>25% of default</td></tr><tr><td colspan="2">Elephant foot compensation</td><td>0.15 mm</td></tr><tr><td colspan="2">Supports</td><td>None</td></tr><tr><td colspan="2">Brim</td><td>As needed (depends on bed adhesion)</td></tr><tr><td colspan="2">Additional settings</td><td>☑ Print external perimeters first</td></tr></tbody></table></figure>&nbsp;<h3>Assembly</h3>Follow this video for assembly instructions. Pay attention - some parts look very similar!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Rwu3UP0cHZw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Rwu3UP0cHZw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h3>Customizing</h3>Dummy 13 should be compatible with most handheld accessories made for my other designs. Check out Lucky 13's <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">remixes page</a> for a good starting point!&nbsp;&nbsp;This design has already been stolen and stripped of attribution a hundred times over. Please don't add to that.

DUMMY 13 Printable Jointed Figure (beta files)

dummy

Josh-3D

IntroA Case/Stand for your Nintendo Switch, to make it look like a Retro TV!&nbsp;I remember this old TV my dad had when I was a kid, and something struck me, that I wanted that for my Nintendo Switch! A Retro TV styled case to stick it in, for a little added fun when I&#39;m not playing at the big screen. Comes with lots of handy spaces too, to tuck secrets in!&nbsp;The front panel uses magnets to keep secure. There&#39;s a pathway too, to allow for a USB-C cable for power and what have you.&nbsp;There&#39;s a secondary profile included, which has a stand for the TV, to lean it at a more comfortable viewing angle. Not required, but might be desired!<figure class="image image_resized" style="width:29.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_939e426832faf.png"></figure>UpdateAdded a print profile for the original switch! I don&#39;t have an original Switch myself, but a user here helped test the fit and looked good! Will update it if any issues crop up though. I printed a copy to make sure it still prints good and the buttons fit, and they do! Enjoy!&nbsp;Community SpotlightCheck out the <a target="_blank" href="https://makerworld.com/en/models/415649#profileId-317808" rel="nofollow noopener">accessories </a>made by <a target="_blank" href="https://makerworld.com/en/@SteveKeller" rel="nofollow noopener">@SteveKeller</a>! In particular Steve has done a remix of the volume/power buttons for the original, and so make sure to check those out, as I&#39;m willing to bet they&#39;ll have an improved fit (I don&#39;t have the original, so wasn&#39;t able to fully test the fit myself) Lots of other cool stuff too! &nbsp;Tools &amp; AssemblyFeatured Filament:Bambu PLA Basic BrownBambu PLA Metal Iridium GoldBambu PLA Matte Charcoal&nbsp;Tools needed:Hex DriverDrill bit (For clearing out holes on the front panel, for the knobs)&nbsp;Hardware needed:2 M3x8 screws (For the knobs)2 M3x10 screws (For the back)8 4mmx6mm magnets <a target="_blank" href="https://www.amazon.com/dp/B075PMYRFT" rel="nofollow noopener">(Here&#39;s an amazon link to the magnets needed)</a>&nbsp;On the front panel, clear out the holes for the knobs, so you can feed the M3x8 screws in. The holes were capped so the insets on the back side would print cleaner. Once the holes are clear, use M3x8 screws to attach the knobs<figure class="image image_resized" style="width:37.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_be95abb54b4eb.png"></figure>On the back, secure it using 4 M3x10 screws.<figure class="image image_resized" style="width:49.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_a4165b1b7550f.png"></figure>Insert the 3 buttons, making sure they line up length-wise. There will be an additional piece to insert in, to help secure the buttons in place when the switch isn&#39;t installed and the front panel isn&#39;t in.<figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_26af293c328f3.png"></figure>Lastly, insert the 8 magnets into the front panel and main case. Be careful with the orientation of the magnets as you insert them! They are press fit and are a one way operation. The fit is very tight, so you wont be able to pull them out once they&#39;re in. Because they are very tight, it&#39;ll seem tough getting them in, but you can do it! I recommend using a tool or something that you can put the magnet on, to help aid in pushing it in.-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Retro TV - Nintendo Switch Case

michelem

<figure class="image"></figure>I present to you my Perpetual Magnetic Calendar, perfect for adding a touch of design to your home or office.&nbsp;The calendar consists of a wheel that houses the months of the year and the days of the week, supported by a pedestal.The transverse axis has the days of the month imprinted on it, while three markers complete the calendar to always identify the exact day!&nbsp;The marker for the days of the month should be moved every day by sliding it to the corresponding number.&nbsp;The other two markers are magnetic, ensuring a WOW effect for those who consult it. In particular, the magnetic marker for the days of the week may seem ordinary, but the one for the month of the year will surprise you by remaining suspended in mid-air!&nbsp;<figure class="media"></figure>&nbsp;Printing:&nbsp;It is recommended to use preset profiles, making sure to use high resolution for the parts with texts.&nbsp;The pieces are not huge, so you can use a resolution of 0.16mm (0.12 even better) for the whole wheel and the axis where the text is located.You can also use adaptive resolution and set a high one only for the top part where the text is, it&#39;s up to you.&nbsp;Colored text&nbsp;You need to change at least one color for the texts otherwise you won&#39;t see them. With AMS it&#39;s simple and you can use multiple colors to print the wheel texts. if you don&#39;t have an AMS, just add a pause when the texts starts and simply change the filament till the end of the print.&nbsp;Inserting Magnets:&nbsp;For the marker of the month and the days of the week, insert the magnet during printing with a bit of glue.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000109567/design/2023-12-27_bec6b379194dd.jpeg"><figcaption>Month marker with magnet inserted during the pause. I know I have to clean my plate… :-)</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000109567/design/2023-12-27_237ec03a77104.jpeg"><figcaption>Weekdays marker with the magnet, remember to add a drop of glue and wait a minute, so it won&#39;t get attracted by the nozzle</figcaption></figure></td></tr></tbody></table></figure>&nbsp;Pay attention to the orientation of the magnets! The two markers must have the magnet&#39;s orientation opposite to the one you will insert in the holes, so they attract each other.&nbsp;Before you insert the magnet put a bit of glue and wait so the magnet won&#39;t get attracted by the nozzle when you restart the print.&nbsp;Month Marker: Printed with the sphere facing upward. At level 106, insert a pause to place the magnet. The magnet should be oriented with the TOP side opposite to the side of the magnets in the month holes.&nbsp;Days of the Week Marker: Printed with the base of the half-sphere on the plate. At level 20, insert a pause to place the magnet. The magnet should be oriented with the BOTTOM side opposite to the side of the magnets in the holes for the days of the week.&nbsp;By the way, presets profile has everything set up yet.&nbsp;For an extra smooth finish, I would recommend ironing all the top layers of the wheel.&nbsp;BOM and Assembly:<ul><li>21 magnets 5mm x 2mm (diameter x thickness) eg: https://t.ly/i8UwR</li><li>about 10 cm of sewing thread</li></ul>Assembly is simple and intuitive, making sure to respect the orientation of the magnets!The magnets must have the connecting side opposite to that of the respective marker to attract each other. Use a bit of glue for the magnets on the wheel.&nbsp;I would suggest to have the markers ready before you glue the rest of the magnets on the wheel so you can know the correct orientation using them.&nbsp;For the axis of the days of the month, glue may not be necessary, but it can be used to securely attach it to the wheel.&nbsp;Finally, the most challenging task: tying the sewing thread.&nbsp;This step can be a bit tricky as you need to determine the perfect length for all the months.Technically, this length is consistently about 82mm (from the axis hole to the wheel).Begin by tying one end of the thread to the month marker and inserting the other end into the small hole on the axis.Now, thread the other end into the hole on the back support without tying it and wrap the thread around the support twice to have it in pace but still adjustable.Verify that the length is correct by adjusting the marker into the month slots and pay careful attention to the thread length so that the magnets attract each other without touching.Once satisfied, secure the thread with a finger and apply a drop of glue to fix it in place.&nbsp;The WOW effect is guaranteed!&nbsp;A happy 2024 to all makers!&nbsp;UPDATE 03 Jan 2024:<ul><li>Added files and profile to use only 6x3mm magnets</li></ul>&nbsp;UPDATE 04 February 2024<ul><li>Added wheels in different languages (Italian, German, Spanish)</li></ul>&nbsp;

Perpetual Magnetic Calendar

3D日历

Sven97

<h2>1. Model Overview</h2>This unique design is a lamp or trophy inspired by the aesthetic of the Monument Valley game. It&#39;s fully compatible with the Bambu Lamp Kit 001, making it a versatile and stylish addition to any space.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_b42e7a0db9dd9.jpeg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_fe233cb92472b.jpg"></figure>Compatible Hardware Kit: LED Lamp Kit-001. For more details, visit <a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">Bambu Lab Store</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_821c0729d506c.png"></figure><h2>2. Model Specifications</h2><ul><li>Dimensions: 200mm (H) x 120mm (W) x 100mm (D)</li><li>Weight: ~115g</li><li>Material &amp; Color Recommendations:<ul><li>Main body: Black <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_38c02d7479b6b.png"> or White Marble <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_a5e8b8ceb2c27.png"> is recommended for a architecture finish</li><li>Sign: White <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_2f8f0e4215f7a.png"> is recommended for clarity and contrast.</li></ul></li></ul><h2>3. Printing Parameters</h2><ul><li>Layer Height: 0.20mm is recommended to ensure a smooth finish</li><li>Infill Percentage: 15% for optimal balance of strength and material usage.</li><li>Support/Adhesion: No support</li><li>Plate: A smooth PEI Plate is ideal for this print</li></ul><h2>4. Assembly Instructions</h2>The main architecture is designed in 5 pieces connected via hex-shape pins, it can be printed without any support. While the pin connections are robust, adding glue between layers can enhance stability.&nbsp;Assembly Process:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_4c4e2674a949.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_5d7cae2413a6.jpg"></figure>Step 1: Insert 4 pins into the base.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_6bad4f17fc9e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_d764de29a4039.jpg"></figure>Step 2: Assemble the sides and back parts.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_638fc1be8c1da.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_43fd3365ac0c4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_fbc5bbf2eca5f.jpg"></figure>Step 3: Place 3 pins on the top of the side and back parts<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_c133fef77186b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_fd4a658f787b8.jpg"></figure>Step 4: Attach the pillar with its pin<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_e5d569b359d99.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_78f9aec0cd5d1.jpg"></figure>Step 5: Fit the top part into place<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_d079c09aaa92c.jpg"></figure>Step 6: Insert the award sign into place<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_a1ceb0d0866ed.jpg"></figure>Step 7: The LED base, originally from the <a target="_blank" href="https://makerworld.com/en/models/39480#profileId-38673" rel="nofollow noopener">Halloween Jack-O’-Lantern</a> model, can be reused here. So you can save some printing time if you already printed this. Secure it by pushing and rotating counter-clockwise from the top.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_7af9b6bde9a2d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/7c6e827f-3eaa-4a82-a753-60ad23ccd6b4.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_48488126ffd59.jpg"></figure>Additional Customization:<ul><li>Print and add figures like Prince Ida and Crowman at 50% size from <a target="_blank" href="https://www.myminifactory.com/users/FORGE%203D" rel="nofollow noopener">Martin Moore</a>. A bit of glue can secure them to the structure.<ul><li><a target="_blank" href="https://www.myminifactory.com/object/3d-print-monument-valley-princess-ida-23797" rel="nofollow noopener">Prince Ida Model</a></li><li><a target="_blank" href="https://www.myminifactory.com/object/3d-print-monument-valley-crowman-23795" rel="nofollow noopener">Crowman Model</a></li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_108859e1dd2d.png"></figure><blockquote>For Ida model, it seems that the pegs to join them are missing. So I just use a little bit glue during the assembly. For this 50% size, glue is necessary anyway. Please refer comments to get more information for printing and gluing.</blockquote>And TA-DA, there you have it!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_d93268a97db77.jpg"></figure>Sign Customization:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_1798cdfbec431.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_7e51aa4e43de2.png"></figure><h2>5. Gallery of Finished Prints</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_f9a52b11701c7.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_339db12b02702.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_66775ec13f31a.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_faa1a2326fb48.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-29_089875d52190f.png"><figcaption>by <a target="_blank" href="https://makerworld.com/en/u/2761194044" rel="nofollow noopener">@ida.liu21</a></figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-31_4b1e2c922584f8.jpg"><figcaption>by <a target="_blank" href="https://makerworld.com/en/u/1236710988" rel="nofollow noopener">@Jorple</a></figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-25_4c830268a981e.jpg"><figcaption>by <a target="_blank" href="https://makerworld.com/en/u/2005363420" rel="nofollow noopener">@JoveA1mini</a></figcaption></figure><h2>6. Version History and Updates</h2><ul><li>2024/01/10 Update<ul><li>Update document</li><li>Add instructions for customize the sign</li><li>Add finished prints images</li></ul></li><li>2023/12/20 Update<ul><li>Initial upload.</li></ul></li></ul><h2>7. Support Me</h2>Illuminate Your Space with Monument Valley Charm and Fuel Design Creativity with a Coffee<a target="_blank" href="https://buymeacoffee.com/sven97" rel="nofollow noopener">Buy me a coffee</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-05-16_f8a06524896668.png"></figure>

Monument Valley Lamp Trophy with Bambu Lamp Kit

user_2465897483

在原来的基础上增加一个58mm双耳手柄卡口。需要通过胶水的方式固定在原来布粉器上。打印模型后，对 Z 接缝的凸起进行简单打磨，能获得更顺滑的旋转效果。针灸针可以用35mm*25的针灸针。原作者模型地址如下：&nbsp;https://www.printables.com/model/465015-spirographic-wdt-tool/files

funny

dummy

Retro TV - Nintendo Switch Case

3D日历

灯

咖啡配件