CharlesS

uni3Dworld

High density model of Hands bowlFormat STL and OBJCreated in blenderMaterial PLA2 perimeters10 % infillNo Supports

Hands Bowl

vase

Linzy

Let BinLink can set under deskuse 6X M4 screw

BinLink  under desk

Rangements

grizzie17

Easy to print hitch covers. A blank template is included so you can add your own designs. A simple latch is included to keep everything in place.<h3>Printing</h3>PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design

Hitch Cover Blank Templates

Camping

A3Dprints

Bestway or Intex pool hose holder

Bestway or Intex pool hose holder 

Cours exterieur

3DNoviceDiY

3 different connectors for 65mm square drain/guttering. Easy print with only one of them (67.5 degrees one) requiring minimal supports on the inside. Print them from PETG with as many walls as you can.The pipes will be a snug fit and you should add some silicone/glue to keep it all in place. Feel free to print and sell any physical products.

65mm Square Down Pipe Guttering Connectors

rain collector

niltsh

Updated @ Jan, 22nd, 2024&nbsp;I've noticed some feedback that my default profile does not perform well on A1 series, mainly because of the overhang of the barrel and main body.As I don't have a A1/A1 mini printer to verify, please be cautious if you would like to challenge on A1/A1 mini. And I would appreciate if anyone could share his/her A1 profile if succeeded.&nbsp;-----------------Story continued from <a target="_blank" href="https://makerworld.com/zh/models/39368#profileId-38480" rel="nofollow noopener">https://makerworld.com/zh/models/39368#profileId-38480</a>&nbsp;Once the kids know what their dad is capable, their dad got mind blown. So this time, I started from scratch and made them happy again.&nbsp;This model works as the thumbnail GIF demonstrated.The total range is around 7~8m, effective range is around 3~4m, should not worry about breaking your window, but I won't recommend to try it.&nbsp;The assembly manual is in the thumbnails, should not be hard for you as you have already own a printer.&nbsp;As I am not a glue fan, this time I adjusted the fitting relatively tight, especially when installing the “hand support”. My suggestion is applying some lubricant and use a small hammer gently.----------------------There are 3 parts need to be prepared separately<ol><li>bow string: the rubber diameter no more than 2 mm should be OK. I bought from <a target="_blank" href="https://www.amazon.co.jp/dp/B00A9MM86S?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">here</a> </li><li>rubber ring: I used the same rubber ring with my katana, the folding diameter is 60mm</li><li>PTFE tube: you could cut from your AMS. I did that.</li></ol>----------------------I am not a aerodynamics expert. Although I tried several approaches, I could not find a better bullet shape rather than ball shape. I really hope anyone would like to help to design a good bullet shape.&nbsp;

Hybrid Crossbow / 弩 - 神机

toys

Yanneck

Spulenadapter für Jayo & Sunlu Pappspulen, um diese im AMS von Bambulab zu nutzen. Dieser Adapter läuft in meinem AMS bereits seit mehreren Spulen problemlos und lässt sich in etwa 15 Minuten pro Seite (inklusive Kalibrierung) drucken. Dieser Adapter sollte für alle Spulen mit einem Durchmesser von etwa 195mm passen.Lasst doch gerne einen Kommentar oder eine Bewertung da, dann kann ich meine Konstruktion weiterhin optimieren.&nbsp;Coil adapter for Jayo & Sunlu cardboard coils to use them in Bambulab's AMS. This adapter has been running in my AMS for several spools without any problems and prints in about 15 minutes per page (including calibration). This adapter has been running in my AMS for several spools without any problems and prints in about 15 minutes per page (including calibration). This adapter should fit all coils with a diameter of about 195mm.Please feel free to leave a comment or an evaluation so that I can continue to optimise my design.

Jayo & Sunlu Cardboard Spool / Coil Adapter for Bambulab AMS

3d printer mods

dfreshkremer

Snowman “coal” and realistic carrot nose. You will have to glue the spikes to the coal and carrot nose. Use the coal for the eyes and buttons down the front of the snowman. I have the z-seam set to random, which gives the carrot a nice texture. If you'd like the best quality on the coal, it is best to download the raw files and use adaptive layer height (smaller layer height towards the top), however for something like this, it's not completely necessary. PLA would probably be fine for these since it'll be used in the winter, however, I have also added a PETG print profile. If you print this and use it for a snowman, please post a “make” so I can see how it looks! Thanks!

Snowman Accessories

Jeu exterieur

xuhao3e8

Here shows my own design, the Aurora, or 极光. It's an incredibly cool FPV cruiser that offers high speed and agility.<img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_07413e4f4b99.png">The design of Aurora is inspired by the IJN J7W Shinden and XP-55, with the addition of modern aircraft elements.Including full-span canard, strakes (although they serve mostly as decorative elements), and winglets.It comes with a <a target="_blank" href="https://www.printables.com/model/567442-dji-o3-air-unit-ptz" rel="nofollow noopener">servo gimbal (included in this model, remix from FLY_101</a>) and cooling system for the DJI O3. So great if you wish to use a headtracker on it.&nbsp;The flying speed is fast, with a cruising speed of 70kph (20m/s), and it can easily reach 100-130kph, pulling 3-4g maneuvers. A large area is required for flying, and it is completely unsuitable for park flying. When the flying speed exceeds 100kph, noticeable vibrations occur in the gimbal, severely affecting the flying experience, necessitating targeted optimization in the design. Here are some basic details:<ul><li>Wing Span: 1030mm</li><li>Weight (4s 18650, no gimbal & FPV system): ~1000g</li><li>Weight (with 4s18650 battery, with gimbal & FPV system): 1170g</li><li>Estimated endurance time: 30-45 minutes (theoretically, still testing)</li><li>Cruising speed: 20m/s-30m/s, 70km/h to 110km/h</li></ul>Tested avionics:<ul><li>Flight Controller: SpeedBee F405 Wing with BZ182 GPS.</li><li>ESC: Any 30A ESC is OK</li><li>FPV system: DJI O3</li><li>Servo: Kingmax KM0940MD*4 (for flight control), and GDW DS014MG*2, 280deg/180deg (for servo gimbal)</li><li>Motor: SunnySky X2216 KV1400</li><li>Propeller: APC/Gemfan 8*6-9*6, this may push you to 100kph or faster.</li><li>Battery: Sony VTC6 18650 4s1p</li></ul>Extra components:<ul><li>Carbon fiber pole:<ul><li>2*6x4x550</li><li>1*6x4x585</li><li>1*6x4x935</li><li>3*3x250</li><li>1*3x150</li></ul></li></ul>Four 6mm (diameter) x3mm (height) magnets for battery and flight controller canopy.&nbsp;The core design concept of Aurora includes:<ul><li>Appealing aesthetics</li><li>Decent endurance time</li><li>Relatively high speed.</li></ul><h2>Printing</h2><h3>Suggest print material:</h3>Fusrock/Bambu PLA Aero.I use Bambu PLA-Aero white for Wing, and FuskRock Gray PLA Aero for Fuselage. Use PLA-Aero from two manufacturer just because colors.<h3>BE CAREFUL GO SETUP CORRECT PRINTING SETTINGS FOR FILAMENTS!</h3>Default setting is for PLA-Aero, change it according to your own filaments. Strongly suggest print Aurora with PLA-Aero.<h3>3D printer</h3>Tested on Bambu Lab X1CC, suggest Bambu Machines with size=256mm<h2>Print profiles:</h2>Fuselage, wings and extra component are placed in different print profiles. They have different slice settings.<h2>Flying Video:</h2>(Click to watch if you see video unavailable)<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=-W8qLUvWbIY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-W8qLUvWbIY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>对于中文用户，可以观看bilibili和简介中的介绍:<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1xj411W7ry/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1xj411W7ry&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1xj411W7ry&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Gimbal system of Aurora is remix from <a target="_blank" href="https://www.thingiverse.com/thing:6193480" rel="nofollow noopener">https://www.thingiverse.com/thing:6193480</a> by <a target="_blank" href="https://www.thingiverse.com/FLY_101" rel="nofollow noopener">FLY_101</a>.You may also use <a target="_blank" href="https://www.printables.com/model/265534-dji-2-dof-gimbal-for-air-unit-camera/files" rel="nofollow noopener">this gimbal on Aurora</a>&nbsp;<h2>Center of Gravity</h2>Flight with current CG setup (the CG icon) is too stable. You may try the following CG at read line, this is optimal CG point according to my latest CFD results and flight test.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-28_43baa86270ef2.png"></figure>&nbsp;<h2>Donation to help me!</h2>Testing and releasing these model aircraft designs is neither easy nor cheap. It requires a significant investment of time and effort. The development cost of this airplane exceeds $1500, and that's not even taking into account my time. If you find my designs practical and useful, please consider making a donation to support my work. Your contributions will greatly assist me in continuing to develop these model aircraft, feel free to buy me a coffee by clicking follow button.<a target="_blank" href="https://www.buymeacoffee.com/xuhao3e8" rel="nofollow noopener"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee"></a>测试和发布航模并不便宜，这架飞机的开发成本超过万元，并且会花费非常多的时间和精力，如果你觉得我的设计非常实用，请捐款支持我，这将对我能够继续开发航模产生很大的帮助：<figure class="image image_resized" style="width:37.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-27_0ec676d5a355f.jpg"></figure><h2>Build Logs</h2>Build logs (in Chinese) for Aurora is available on <a target="_blank" href="https://xuhao1.notion.site/Aurora-1100-8851f194908a4648b1bb22ffa9a7a9cb?pvs=4" rel="nofollow noopener">my notion site,</a> this contains every detail you may want to know about Aurora.<h2>Update since upload</h2>2023/12/21: Update to integrated vertical tail and rudder: do not need manually install hinge. I put the old design of vertial tail in supported files.2023/12/23: Missing fuselage part is added to fuselage.3MF. Servo gimbal is also added to extras.3MF with original author's approval.<h2>Some details</h2>More details will be adding later.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_f29fd3e4a7b4a.png"></figure><figure class="image image_resized" style="width:58.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-22_d5a12ad1a93b4.jpg"></figure><figure class="image image_resized" style="width:56.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_3cd4e9ee5e9cc.jpeg"></figure><figure class="image image_resized" style="width:62.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_b01c294f7d8c7.png"></figure><figure class="image image_resized" style="width:53.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_12f6f67c86d8d.jpeg"></figure><figure class="image image_resized" style="width:54.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_d359d7203dc83.png"></figure><figure class="image image_resized" style="width:55.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_f582829daf851.png"></figure>

Aurora: Fixed-Wing FPV Cruiser

RC models

Fixumdude

Version 2 has thicker stronger bottle neck area based on user feedback. Fun potion bottle shaped like a pumpkin with a screw on stem for the lid for all your Halloween potion needs.&nbsp;Bottles shown were printed in SliceWorx Fall Foliage and BANANAAH! PLA, PolyMaker Gold/Red Silk PLA and Stems printed in Forest Fantasy Green Multicolor HTPLA.&nbsp;Large bottle printed at 100% scale with 0.2 layer height and 15% grid infill on Prusa MINI+&nbsp;Smaller bottle printed at 75% scale with same settings.

Pumpkin Potion Bottle

Halloween

SK07 Skipper07

This is a highly detailed 3D model of a toy toaster. The model is beautifully rendered and showcases intricate design features such as the toaster slots, control knob, and the handle of the lever. The shape and dimensions closely mimic those of a real-life toaster, making it a perfect piece for kitchen playsets or for display purposes. With its basic shape yet accurately representative details, this 3D model is ideal for those interested in product design or toy manufacturing. Designers, hobbyists, or anyone with a keen interest in 3D modelling can utilize this as either a project, a toy, or just for fun. Download and enjoy this 3D model of a toy toaster now! Do note: dimensions and scale may need adjustments to suit your needs.

Toy Toaster 2.4

jouets

mahir.yueceyurt

Hello everyone,This is the first model I upload, I hope you like it!I made these knife handles for my self-forged knife.If you need other dimensions, don't hesitate to contact me.&nbsp;The model does not need to be supported.

Kitchen Knife handles

chasse

Dinozzo28

Danger sign

Jokes

muddtt

A gift box for Christmas goodies. Have a gift to give from your 3D printer this holiday season...or anytime during the year. Fill it with goodies. Should scale to any size you want.***UPDATED: Added GC_Top & GC_Bottom to fit your favorite gift cards!*Part will have to be flipped to print right. Threw in a pic to show proper orientationsCategory: Other

Christmas Gift Box

TRAVAIL | Claudie

laisch

<blockquote>Info: The wrench fits for anglegrinder nuts with 35mm hole circle diameter. But like some comments mention there are also other types of nuts with 28 or 20 mm hole distance. Check your dimensions before you print it</blockquote><figure class="image image_resized" style="width:32.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/165220/2023-11-12_c39e11d978104.png"></figure> Found this Idea in the video of pocket83 and had to do a 3D printed version of it<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=SoMkAkV62v0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SoMkAkV62v0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>The model prints without supports if you use 0.2mm layerheight.&nbsp;For furhter hardware you need at least 2 M5x20mm hex nut screws. You can screw them directly in to the model. If the fit is too tight you can tap the holes before screwing the screws in.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/165220/2023-11-03_tkq9czc274jr.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Quicky (Angle grinder wrench)

tools

rostap

<h3>Arm mounting system </h3>It is a universal set of holders and arms. You can use this system as a notebook holder, tablet holder, monitor holder, camera or any other device holder or you can have it as a shelf holder.If you print a pair, you can made various tables.You can attach more arms togehter. I made some connecting parts and other accessories. There are no limits to imagination. I made it with increased strength and durability. If you add few perimeters the holders/arms can hold pretty good weight. &nbsp;&nbsp;&nbsp;Small light versionHolders reduced x 0.6 and then adjusted (hole sizes, gaps, etc.)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ygt4l1gyz0rx.jpg"></figure><h4>Základní informace</h4><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized image-style-align-left" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_1vuk35qftkm3.jpg"></figure>&nbsp;</td><td>&nbsp;You can adjust the angle in ten degrees. Screw and nut fit on both sides. &nbsp;&nbsp;&nbsp;</td></tr><tr><td>You can tight and loose from both sides no matter where the nut is. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_5bbkp2ve4kgr.jpg"></figure></td></tr><tr><td><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_l4f3cs4r4hsf.jpg"></figure></td><td>There are various nuts and screws. Of of them counts with the allen screw (hex bolt) M8x40&nbsp;</td></tr><tr><td>You can also print the crew which can be tight and loose without gear- with the printed hex bolt screw. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7dyjbvq16pqm.jpg"></figure></td></tr><tr><td><img src="https://media.printables.com/media/prints/165239/rich_content/5d2096ce-0223-4834-ade9-1fd6b3aec194/resize_img_6432.jpg#%7B%22uuid%22%3A%2292583698-0623-4e34-94da-bb853c30ae47%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"> <img src="https://media.printables.com/media/prints/165239/rich_content/4dd49cb0-b7a2-4690-8a96-9c03407d2c2e/resize_img_6427.jpg#%7B%22uuid%22%3A%225c571a00-83c6-45bf-a6bb-97f04a44ed33%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"></td><td>The holes for key in the screw and two arms have the same size as the holders in Honeycomb storage wall (https://www.printables.com/cs/model/152592-honeycomb-storage-wall). That means that you can hang different accessories on the arms. </td></tr><tr><td>There are various of arms. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_bdrw6oh1oh1y.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_u06b8t58ztlv.jpg"></figure></td><td>ClampI made 3 different types - <ol><li>for the screw M5/M6 mounting spacing for holders 30x30mm</li><li>for the screw M5/M6 mounting spacing for holders 40x40mm</li><li>for the screw M5 mounting spacing for holders 40x40mm</li></ol>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_t3u1ipn1agdd.jpg"></figure></td><td>VESA rotating holder - 75mm</td></tr><tr><td>Combination for possitioning along the axis Z<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7m1sfrwcw20k.jpg"></figure>&nbsp;&nbsp;</td><td>System - high table for tablet holder <img src="https://media.printables.com/media/prints/165239/rich_content/228c6e5e-a2a4-41ce-a79e-962f4006c973/resize_img_6430.jpg#%7B%22uuid%22%3A%22da81a7de-4dd3-453e-96dc-6c179e6bc32e%22%2C%22w%22%3A1512%2C%22h%22%3A2016%7D"></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_11nh0grq3czm.jpg"></figure></td><td>There are holders for three tablets. Bottom width<ol><li>196 mm</li><li>250 mm</li><li>305 mm</li></ol>screw spacing 30mm</td></tr></tbody></table></figure><h4>Basic arms</h4>The only difference is the grid<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_0qsfmal86eys.png"></figure>&nbsp;<h3>Holders</h3>A few basic handles<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_wjg38olir4sz.png"></figure>&nbsp;<h4> </h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ej2zf1avpe73.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_2ujybj6hyhzb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_3i0br0eesaay.png"></figure>&nbsp;I printed small parts on the Prusa Mini, the arms on the Ender 3.&nbsp;My printing settings<ul><li>material: PETG</li><li>perimeters: 8 and more</li><li>infill : 30% and more</li><li>layer height 0.3 (with nozzle 0.6 layer height 0.4) (screw and nuts only 0.2mm layer height) </li></ul>&nbsp;

Multifunction Arm mounting system

maison

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).