Chaplain

surfing 

Jeff Smith

Updates/Configurable version of this stand can be found at <a target="_blank" href="https://makerworld.com/en/models/413965?fbclid=IwAR2Sa5-zERBZGRC9C6l75A1Z5qode-Uui4HvwtOt7UHAxx6e5TfdupwDNvs_aem_AfDh4rLjKxl4AR1AAzFGl-d1uFvpm_Y3GYhrFJr2gWnSETDZmrRmJOcjY6ztx52BWB7F2wWUU16RCAEamOC5NxUF#profileId-315982" rel="nofollow noopener">Flexable &amp; Configurable Bookmark Stand by Jeff Smith - MakerWorld</a>&nbsp;Wanted a stand to hold bookmarks as I&#39;ve been making a few of them lately. The slots are sized for the bookmarks I make and are 1.25mm deep (15 degree angle as shown in the second picture) and 22mm wide. If you have bookmarks from others, they will likely fit, but might wiggle a little side to side. I&#39;ve included the .STEP file in this upload so those who are capable and so inclined can change it to fit their requirements.

Bookmark Display Stand

Avery 

rookiepharoah

this was uploaded from a free site. this is not my model. i simply wish to share it

baby groot

kids

Pro3DTinkering

***UPDATE*** Since I published this model I have gotten many good reviews and kind words about the model, but also some negative feedback too, they are all precious, because you can do your model even better. After all gathered feedback I realized that the hinge itself was too sensitive to filament stiffness. To eliminate the chance that the hinge will break on first fold only cause your filament differs from the one I tested on I adjusted the hinge and tested on different (Bambu) filaments like: Basic, Matte, Sparkle and Silk&nbsp;The glasses case is printed in PLA filament, and the inserts are from TPU. The case does not require post-processing, so the only thing you have to do is fold it along the hinge (after the model cools down) and insert four magnets 8x3mm; make sure you follow the polarity of the magnets (*please note that the insertion of the magnet require some force, it&#39;s made by purpose to hold the magnet in place)  The most important thing for the inserts is to dry out your TPU filament before printing. Please check the result below:&nbsp;<figure class="media"><oembed url="https://www.youtube.com/shorts/JpKSkhkOII8"></oembed></figure>&nbsp;Feel free to comment and share your prints; it&#39;ll be nice to see them. I would appreciate any feedback!&nbsp;To support my projects and gain access to a Commercial License, please consider joining my <a target="_blank" href="https://www.patreon.com/Pro3DTinkering" rel="nofollow noopener">Patreon</a> community. Your support helps bring more creative designs and exclusive content to life!&nbsp;Thank you,Happy Tinkering!

Glasses case 

neat 

Maker Tom

Large Crate for all the batteries in the household.Fits in drawers.High 52mm&nbsp;Happy printing

Battery Crate XXL AA / AAA / 9V

Danelle’s list

lindnjoe

Warning!! This takes patience to put together. Round Deer and Snowman Lantern with 3 thin layers that fit into a base. The layers have tabs on the bottom that fit into the slits on the base. The front layer with the snowman and deer is printed in two parts, you will need to put those two layers together to make one. The layers are printed very thin at 0.2mm. Be careful when taking them off the heat bed. Slide the tabs on the end into the slits on the opposite end.You can size up or down. For best results size up.I recommend a dab of glue on a couple tabs per section to hold the round layers to the base.3 Layers to print and 1 base. &nbsp;A tea light will sit in the middle. You need patience when putting this together.

Deer and Snowman Round Lantern

decorations 

K2_Kevin

Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!Includes Bambu Studio single and 2 color .3mf files.

Rugged Organizer Large Gridfinity

gridfinity

focusst

a1 mini spool for ams liteabout 1kg should be placedcompatible with a1 mini ams litegood for refills&nbsp;

a1 mini ams lite spool

tools 

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

ToroSpin Turbo - Launcher with planetary gearbox

flying 

kabendesign

Topographic model consisting of a scaled down version Crater Lake (Mount Mazama) with contours that show change in elevation. Two profiles - one painted with three colors, and one unpainted.