Tissue Box made for use with roll of toilet paper. The magnets are 8mmx3mm neodymium. There is a pause in the print for the side panel/main box where you insert the magnet. The main box and side panel are separate 3mf both should be in the downloads. When you insert the magnet watch the print with a finger on the pause button to make sure the print head doesn't pick up the magnet. I didn't have any problems with mine but just in case. make sure you have the magnets facing the right direction

Blooket Mega Bot or what ever that is. My son asked me if I could model one for him and this is what I came up with.

Designed a quick wall mount with hidden screws for the filament laying all over the floor in our print room. I ended up only putting in the top screw because I screwed it into a stud in the wall and it is holding just fine. I included the FreeCad files in case anyone wants to adjust the screw sizes used to screw into the walls. I used what I had in the garage to make the design. #10 wood screws 2 inches long and a two 1 1/8 dowel rods.

After making the corner perches for the cage the cleanup was 100% easier so I wanted to try and make the rods that go across the cage too. These rods make about an 18 inch rod to fit the 17 inch cage width. I included the FreeCad file if you want to make adjustments for different size cages.

Baby cockatiel was having trouble getting to the seed in the seed trays provided with the cage. I don't know if it's the color or just the fact that these are shallower but he eats away with these.

Was originally going to make these platforms out of wood but my wife asked me to 3D print them because they would be easier to clean. They came out great and the birds seem to love them!

Cricut vinyl holder for all the vinyls that were laying around my wife's craft room. I didn't glue the pieces together they were a pretty secure fit when printed on the P1S, but a little Gloop would for sure make this super solid. Also added some clips because my wife wanted to stack multiple on top of each other. This is just a free standing solution because she didn't want to attach anything to the wall for it. I also threw in the FreeCAD models incase anyone wants to make any adjustments.

Any one have any idea why my print time just increased? same print and I haven't changed any settings it. This just happened this morning. There is the pic of the history and the new file sliced.

Is it possible to connect more than one maker world account to a P1S?