Cfd923

Freddie

Mini Flexible dinosaur&nbsp;I printed on the A1 mini @ 80% and looks pretty good. Please let me know if you have any issues with the print, this is my first flexible model I&#39;ve created and I&#39;m still learning.

MINI FLEXI DINO

craft show

BamBam Design

Old Treasure:Mixed with Meshmixer 2019 from “Cute Mini Octopus” & “More Realistic Ball-Joint Articulated Octopus”&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/198873/2023-11-16_71e4146864dd7.png">

Realistic Octopus

Dino’s and stuff

NotJoel

Mini mushroom keychain. Use a small amount of glue for the white dots and eyes. Tweezers help to insert the eyes into the socket. No supports are required for the mushroom top.

Mushroom mini keychain

Madeline

Kaleb08

Print in PETGas it will wear out fast in pla if you have any questions, feel free to ask merequires tree supportsinfill, 15%

Articulated Groot

statues characters

Kit Crafters

Build your own Formula 1 2023 racecar with this incredibly easy to print model!&nbsp;Modelled after the 2023 hybrid era cars, this model kit card has spinnable wheels and a flexible front wing like the real racecars.&nbsp;Easy to assemble and is put together with pressure and friction fits.&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/22058#profileId-20000" rel="nofollow noopener">Mario Kart Model Kit</a> as well!

F1 2023 Model Kit Card

the boys

Cake3d

Hey there, I've designed this model to store my most common used tools, glue, consumables and parts for my printers. Slots for an isopropyl bottle, Elmer's and Bambu supplied glue at the left side but coincidentally the centre cut out for the top glass knob is the perfect size for Elmer's too. Plenty of slots on the right for scrapers, pliers, tweezers, unclogging pins and snips including a dedicated slot for the Bambu scraper that comes with the Printer. Middle and front has room for spare parts. This model has been very popular on Printables and downloaded over 6000 times so I must've done something right.After some suggestions from some people on the Bambu FB group I've added the ability to install a small LED light and cable management underneath the storage to improve the much needed lighting in the printer but currently it only allows a small light bar approx 190x25mm. I do plan on rearranging and removing some slots to allow for a bigger light bar in near future so if you have suggestions for a popular or common light bar please comment and I'll try make it fit. I'd also consider requests/suggestions for specific tool or part slots.The Model fits the dimensions of the X series perfect but also works great on P Series, it sits over the glass door knob and hugs each side of the AMS so will not move and cannot be knocked off. Cut outs are for the X1C touchscreen and the pointless buttons.It's split into two parts that lock together (no tools screws or glue required) so that this can be printed within the X and P series build dimensions. <figure class="media"><div data-oembed-url="https://youtube.com/shorts/gx0XCUPGt9c?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=gx0XCUPGt9c"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/gx0XCUPGt9c" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>I've also more recently designed a similar storage optimised for the P Series but is still a great alternative for the X Series but it has some extra features such as phone/tablet stand, much bigger and modifiable modular slots that you can swap to suit or make specific tool holders. Link to that model is > <a target="_blank" href="https://makerworld.com/en/models/38428#profileId-37257" rel="nofollow noopener">https://makerworld.com/en/models/38428#profileId-37257</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/264669/2023-12-13_687eb38f33a71.jpg"></figure>&nbsp;PRINT SETTINGSI highly recommend you print using my STRONG and NEAT print profile as it's tried and tested. My Settings used are below to make this strong and solid but if you want to save an hour or two you do you, top/bottom layers and walls can be reduced to save time and plastic. you're looking at 10-12 hours print time with exactly 0.5kg filament used. I personally printed both parts separately as it is a long print however both parts can be printed at the same time on one build plate and worked great, my print profile contains build plates with both on and also with them separated one part per plate. I recommend eSun PLA+ silver for a good match for the X series printers and Filament PM PLA+ matte black for the P series. I've included build plates of the model in parts or together just pick which you want.4 walls (.4 nozzle)0.2 layer height6 bottom 6 top layers15% gyroid infillTURN OFF AUX FAN TO AVOID WARPING -brim not used in this profile, use brim if you want but it'll probably make joining the parts together more difficult if the brim isn't removed fully.This is designed NO SUPPORTS REQUIRED, no issues when I printed mine some bridging wasn't pretty but it's all hidden underneath, clean from above and strong. &nbsp;&nbsp;Hope you love the model, all I ask in return is you hit like if you do. I would love for you to share your make on here and leave a review it means a lot to me. &nbsp;&nbsp;&nbsp;User Lakopet has created an adaptor to allow this storage to fit perfectly to the side of the printer, rather than on top.<a target="_blank" href="https://makerworld.com/en/models/15641#profileId-16038" rel="nofollow noopener">https://makerworld.com/en/models/15641#profileId-16038</a>&nbsp;Please also respect the license - this is for personal use only.

Top Tool Storage for Bambu Lab X1C X1 P1S P1P printers with AMS

printer stuff

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

dragons

ATTV85

PLA of diferent colours 20% infillBase part…….1xParts 1 - 7……3xBox fot tetris without lid <a target="_blank" href="https://makerworld.com/cs/models/98222" rel="nofollow noopener">Tetris balance game box by ATTV85 - MakerWorld</a>Box for tetris with lid <a target="_blank" href="https://makerworld.com/cs/models/102143" rel="nofollow noopener">Box for tetris game with lid by ATTV85 - MakerWorld</a>Dice <a target="_blank" href="https://makerworld.com/cs/models/102146" rel="nofollow noopener">Tatris balance game - dice by ATTV85 - MakerWorld</a>&nbsp;

Tetris balance game

games

Sevro

Update 02.12.2023In print profile I changed in the head wall generator form arachne to classic. Now it is easier put head on body. &nbsp; Flying dragon inspired by dragons from Game of Thrones.Print settingsWings has only one layer so printer have to be good calibrated.First layer have to be perfect for good flight.I use PLA but you can experiment with other filamentsPEI sheet ensure best quality because after print and cool down the whole dragon body can be remove without bendsIf you have other types of sheets and adhesion is very large, remove dragon body carefully because if you bend it to much the flights might be not too good.&nbsp;Body printing:<ul><li>0,2 mm layer,</li><li>Use organic, tree support because legs need it. Be gentle with removing support, because foot of the leg can break off.</li><li>You can change color by use color change option in slicer. You can do it on second layer</li></ul>Head printing<ul><li>0,2 mm layer</li><li>100 % infill for good balance. It's weight should be around 3 grams. It may be little difference due to various density of PLA filament</li><li>Print with position as it is. Tilted 45 degree</li><li>Raft 3 layers</li><li>Support on bed only, grid style ( no tree, organic)</li></ul>InstructionOnce printed, press the head onto the body. It should fit tight without glue.Bend up the tail a little and throw dragon like dart or paper plane.<figure class="image image_resized" style="width:426.335px;"><img src="https://media.printables.com/media/prints/625290/rich_content/7db060b4-efac-4518-9dc7-c9a47ff48fdd/thumbs/cover/800x600/jpg/img_20231025_184027.webp"></figure><figure class="image image_resized" style="width:424.332px;"><img src="https://media.printables.com/media/prints/625290/rich_content/97a4ada9-c0c8-427d-88df-c7e3c61ab022/thumbs/cover/800x600/jpg/img_20231025_184023.webp"></figure>For good flight there should be very little of wind.If you flight outdoor then dragon rarely fly straight because every blow of wind can change it direction so a lot of space is needed.&nbsp;If you like this model check out my other flying models&nbsp;Have fun