Dragons Lair

Coconut

This is a Gel Blaster adapter that I made for my kids&#39; Gel Blasters. It allows you to use a soda bottle or similar to make a larger hopper. I use Propel favored water bottles. They are slim and make a nice size that is not too bulky, but holds about 2500-3000 gels. It works with both the rifle and the pistol gel blasters. Please note…there are a lot of different size threads used for soda and sport drinks. I used a PCO1810 thread standard. If folks want something specific, just leave me a comment.&nbsp;Known compatible bottles my kids have used. ( I am sure there are more).  <ul><li>Propel Flavored water bottles</li><li>Smart water bottles</li><li>Polar Seltzer bottles</li></ul>&nbsp;Funnel Design to help fill:<a target="_blank" href="https://makerworld.com/en/models/490886#profileId-404367" rel="nofollow noopener">https://makerworld.com/en/models/490886#profileId-404367</a>&nbsp;

Gel Blaster GelBlaster Surge Soda Bottle Adapter

Blaster accessories 

朔夜时雨

Perfect DND Dice tower for all types of board games. Supports the D20 dice as well as many other dice!&nbsp;No supports needed2 wall lines15% supportive cubic infill<a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20dice%20tower" rel="nofollow noopener">dice tower</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20castle%20dice%20tower" rel="nofollow noopener">castle dice tower</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20dnd%20dice%20tower" rel="nofollow noopener">dnd dice tower</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20board%20games" rel="nofollow noopener">board games</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20board%20game%20dice%20tower" rel="nofollow noopener">board game dice tower</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20dice%20tower%20for%20board%20games" rel="nofollow noopener">dice tower for board games</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20tower" rel="nofollow noopener">tower</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20dice" rel="nofollow noopener">dice</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20dnd%20dice" rel="nofollow noopener">dnd dice</a><a target="_blank" href="https://makerworld.com/zh/models/search?keyword=tag:%20dnd%20tower" rel="nofollow noopener">dnd tower</a>

dice tower

Dice Tower 

N426

I think there&#39;s something coming out of your tire…

Tentacle Valve Cap

Bikes

JSSL 3D

We were tired of issues scooping pellet litter, nothing else available in our area. This is designed to print strong on a 45deg angle and make quick work of clearing out standard size litter boxes.

Pellet Litter Scoop

Pets

RileyDesigns

This is snake scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. If there are any shapes you would specifically like I'd be happy to make them and upload it as a profile.&nbsp;MeasurementsEach side of the hexagon is 7mm in lengthDistance from center to center to link the chainmail together should be 13.25mm horizontally, and to get the second row of chainmail is over 6.625mm up 11.5mm. Do not reduce the distances lower than that or the scales will fuse together.

Snake Scale Hexagonal Chainmail - Print in place

Chainmail

Slick

The clips are designed to fit most 2 Piece fishing rods allowing easy storage.There are 2.5,4,6,8,10 and 12mm holes however printing in TPU allows accommodation for more sizes inbetween.I recommend using at least 2 clips per rod to ensure they are firmly held. I recommend printing in TPU with 0.2mm Height and 10% infill.

2-Piece Fishing Rod Clip

Fishing

Dengamleninja

Avengers Shelf

Super Heros

Tommy Gun

There it is !!! the green pipe / tube piggy bank is finally arrived !!&nbsp;-simple glue to attach the top and bottom portion :D voila !!!&nbsp;Enjoy !!&nbsp;Let me know if anything&nbsp;Interested in selling my prints :<a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a>

Super Mario Green pipe tube piggy bank

Video Game

Little Maker

It is a multicolor flexi articulated chameleon! &nbsp;Is a print in place model that does not need supports.&nbsp;I hope that you like it!

Multicolor articulated chameleon

Animals

JF-699

I hope you enjoy this simple Home Decor Sign! Happy Star Wars Day! You can make it as large as you want. I had previously set the “flush into object infill” and it messed up the white a little bit. Avoid my mistake and just have your purge separate. Please check out some of my other Home Sign variations. <figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450128/design/2024-05-01_39e032b638fb.webp"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450128/design/2024-05-01_5d94a726217b48.webp"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450128/design/2024-05-01_efc481edea2d98.webp"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450128/design/2024-05-01_e489e065ada39.webp"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450128/design/2024-05-01_82bd9bcd2accc8.webp"></figure></td></tr></tbody></table></figure>

Mandalorian - Home Sign - Standing Decor

STAR WARS

Dragon in the Woodshed

I made this as a way to add my store brand on the back. These have that removed so you can add your own, just use as coins or tokens or add 6x3 magnets into the magnet file.

Dragon coin - as coin or magnet

RANDOM THINGS

Mysstra hueforge

Regalo para el dia de la madre del tradicional gnomo.usando hueforge para su creacionHay dos stl una de ellos con el archivo como veis en la foto, en el otro para un cuadro con el fondo blanco de 200x200&nbsp;Gift for mother&#39;s day of the traditional gnome. Using hueforge for its creationThere are two stls, one of them with the file as you see in the photo, the other for a painting with a white background of 200x200&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm&nbsp;Filaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil pink Transmission Distance: 7.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA smatfil White Transmission Distance: 6 This print uses 4 unique filaments&nbsp;Swap Instructions: Start with negro At layer #6 (0.56mm) swap to pink At layer #16 (1.36mm) swap to Blue Gray At layer #19 (1.6mm) swap to White for the rest.

Mother's day gnome

MOTHERS DAY

SK07 Skipper07

Hello and EVERYONE, THIS IS MY HALLOWEEN HOUSE I HOPE YOU LIKE IT.

Skippers Halloween House

HALLOWEEN

Mr.Jay

Collection of all scanned nativity scene figures.Supports are needed for printing.&nbsp;<blockquote>If you like it, please support me by downloading the files.</blockquote>

Nativity Scene All figures

Christmas 

3DPickles

MINECRAFT keychain

Keychains

Vope

🎉 Get ready to upgrade your hair! 🎉 🌟 Designed with love and crafted with precision 🌟 This hairpin brings timeless charm. Adds a touch of flair to any hairstyle. 💁♀️ Whether you're heading out for a casual day or glamming up for a special occasion, this hairpin is your go-to accessory! 💖 Time to add some fun and flair to your locks! 💃🌈✨

Hairpin - 03

Hair

TheBasedDoge

Modular Sofa Cupholder system for your sofa armrest!I designed this because I didn't have enough room to put a side table, so I had nowhere to put my stuff! Designed for a 100mm arm rest, but can easily be remixed and adapted to any size of arm rest.&nbsp;The attachments are slotted and simply drop into place, no tools needed whatsoever.&nbsp;Features:<ul><li>2 slotted attachment points for accessories to be mounted.</li><li>Two styles of cupholder attachments, one standard and another slotted meant for mugs with handles.</li><li>Basket attachment which I use to keep my remotes</li><li>Flush mount for Qi Charger. I used the $5 ones from IKEA. Very cheap and easy to get anywhere.<ul><li>If you use the top mount Qi holder without the coil, it can also double as a second cupholder spot</li></ul></li><li>Mix and match! With the slot system you can print two cupholders, two baskets, whatever you suits your needs best.</li></ul>

Modular Sofa Cupholder System - With Qi charging!

For The House

Filar3D

Steampunk easters egg container!&nbsp;You can store small chocolate easter eggs or whatever you want :)&nbsp;Assembly Instructions: The egg has 5 parts<ol><li>Top</li><li>Bottom A1</li><li>Bottom A2</li><li>Side gear</li><li>Top Gear</li></ol><ul><li>Glue Bottom A1 to bottom A2</li><li>Insert side gear and top gear into Top (they pressure fit)</li><li>You dont need an AMS. The egg is designed so you can make color changes based on height.</li></ul>&nbsp;Wanna sell my designs? Join my patreon: <a target="_blank" href="https://patreon.com/filar3D" rel="nofollow noopener">https://patreon.com/filar3D</a>  &nbsp;

Steampunk Easter Egg Container

EGGS 

Macroglossum

This is a cute velociraptor figure. Easy to print and easy to paint.He likes long walks and classical music. You gotta watch for your fingers though.

Cute Baby Velociraptor

Dinosaur

Boodl3D

<h4>Some of us don&#39;t like pink hearts and teddy bears on Valentine&#39;s Day….  Lid fits on snug with a thin shadow-line which will allow it to be opened more easily.   </h4><h2>**REQUIRES MULTICOLOR CAPABILITY**</h2><h4>Prints the lid face down for a smooth image on top when removed.  THIS VERSION IS FOR PERSONAL USE ONLY For Commercial-use version, see listing on <a target="_blank" href="https://cults3d.com/en/3d-model/home/skull-heart-box-commercial-use-allowed" rel="nofollow noopener">cults3d</a>!  </h4>Be sure to check out my <a target="_blank" href="https://makerworld.com/en/models/201023#profileId-221397" rel="nofollow noopener">table tray</a> if you like this box!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000154401/design/2024-02-23_a1958be30e91c.jpg"> Or NEW <a target="_blank" href="https://makerworld.com/en/models/432885#profileId-337482" rel="nofollow noopener">Spinal Rose Growth Tray</a>  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000154401/design/2024-04-18_f077d5dccc6d4.jpg">

Skull Heart Box with Tight-fitting Lid

Decor

knobby

Simple ring easy to resize in slicer

Simple ring

Jewelry 

Lolcio

Multifunctional modular hanger, mounted to the headrest. One handle, many accessories. For headphones, bags, cables, Nintendo, phone, iPhne, iPad, magsafe charger, cup holder, hanger and much more, possibilities are endless...The hook is versatile. You can hang a jacket, shopping bag, it can easily support a weight of several kilograms. Thanks to its unique design and safe assembly, it will safely and stably hold items or shopping bags lying around the car. The cup holder will hold a drink from the drive thru, a coffee mug, thermal mug, etc.The mounting is rock solid, it is stiff, it doesn&#39;t hang or lean, it is not afraid of bumps or dynamic driving.<h2>If you need to change the dimensions, please let me know. The holder fits a 12mm pipe diameter because that&#39;s what I have, but it can be easily adjusted to other dimensions. Likewise, if the handle sticks out too far from the backrest or is too close, I can easily change it to one that fits your car perfectly. If anyone has an idea or need, do not hesitate, will also try to design it, to the best of my ability.</h2><h2>Other models: Headphone/Bag/Jacket Holder <a target="_blank" href="https://makerworld.com/en/models/425814#profileId-329514" rel="nofollow noopener">https://makerworld.com/en/models/425814#profileId-329514</a></h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/851063/2024-04-12_3e86d99d0951c.png"></figure><h2>Cup Holder <a target="_blank" href="https://makerworld.com/en/models/425844#profileId-329549" rel="nofollow noopener">https://makerworld.com/en/models/425844#profileId-329549</a></h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/851063/2024-04-13_2721273e4894b.png"></figure><h2>MagSafe charger <a target="_blank" href="https://makerworld.com/en/models/426359#profileId-330184" rel="nofollow noopener">https://makerworld.com/en/models/426359#profileId-330184</a></h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/851063/2024-04-13_3fa6bc6f2ca9a.png"></figure>

All in One Car Modular Headrest Holder Nintendo

For the Car

Filionix3D

Explore the fascinating world of spiders with Aracna, the card kit that brings nature into the palm of your hand. With a flexible and articulated structure, this spider moves realistically, inviting you to observe up close the wonder of arachnid biomechanics.Aracna is the perfect companion for nature explorers of all ages, with agile legs and a body rich in detail. Watch as it gracefully moves through your environment and display it with its web-shaped stand, adding a touch of elegance to your living space.The cards are designed to be printed in A1Mini size as well.&nbsp;Note: I added some extra pins so if you lose them you don't have to print again!!&nbsp;Note : The smaller size of the A1mini's spider web is due to the reduced dimensions of the printing plate. Since the spider took up too much space on the web, a smaller version was designed that cannot be placed vertically like the A1's, but can still be hung on the wall or left on a surface.<img src="https://makerworld.bblmw.com/makerworld/draft/671138/2024-03-06_28048ed93441c.png">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/671138/2024-03-06_0979082105bbc.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/671138/2024-03-06_9dd44edea8f37.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/671138/2024-03-06_e2029f063a33c.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/671138/2024-03-06_d94ac29bcf9c2.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/671138/2024-03-06_fbf94606e6386.jpeg">

Arachna the Robot Spider Nature Explorer Card Kit

Puzzles

Filusion3D

<h4>Summary</h4>These are the three Spiritual Stones from The Legend of Zelda: Ocarina of time (Kokiri's Emerald, Goron's Ruby, and Zora's Sapphire).I made them because I couldn't find any good models of the stones online anywhere - none of them looked accurate. These were ripped straight from the game with the 1964 emulator, the VRML plugin, and Blender. They were then cleaned up in Solidworks to fill in missing surfaces, knit them into a solid, and orient them to print well.<h4>Instructions</h4>&nbsp;Each Spiritual Stone has the stone and its holder.The stones are simple enough that they can be printed with no support material. For prettiest results, print them with one shell and no infill, in a translucent color. The holders are a bit more complicated. I've included models with integrated support that work great on my Replicator 2, but if you want to use your printer's own support generation, I've also added models without it.For Kokiri's Emerald, print one stone and one holder. When assembling it, the emerald has a particular orientation. It's a bit confusing, so I've included a picture that should help.The Goron's Ruby is easiest. One stone, one holder. They should slide together pretty snugly, but if not, a dab of super glue on the bottom should help.Zora's Sapphire is the most annoying. Print three of the stones, three of the little accent gems (in the same color as the holder), and one holder. Use a clear glue to carefully glue the gems in their respective areas. You might need to use an exacto knife to trim the tabs a bit and make them fit well.In addition to the stones, I made a base that they can be mounted on. A bit of hot glue works well for this (and if you want to take them off later, rubbing alcohol makes it lose its adhesion).&nbsp;

Zelda Ocarina of Time Spiritual Stones

video games

DAVID HOLEČKO

Sanding grips 100mm 14x45mm screw

SANDING GRIPS 100MM

Tools

DOMORED

oni mask鬼のマスク&nbsp;

oni mask 鬼のマスク

Masks

Fixumdude

Introducing the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle.&nbsp;Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Example printed in COEX (transition spool) Blue PLA.

Fixum Dude Motors PiP Jeep Gladiator

Vehicles 

Lucky 13 Toys

<h3>Dummy 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product. Too many people are doing that already!&nbsp;Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;Yes, Dummy 13 is now on MakerWorld.&nbsp;<h3>Please read before printing:</h3>This is a work in progress. It has been collecting virtual dust while I work on other projects, so I've decided to release it now in a “beta” state. I don't have a timeline for when the final version will be finished, but the current files are fairly complete - just lacking some perfectionist polish. Please understand that there is some room for improvement here. I welcome your feedback to help make this design the best it can be.&nbsp;What's finished right now: Design of all parts, except for minor tweaks based on feedback. Basic instructions.&nbsp;What's not finished: Parts on runners for better adhesion without brims. More detailed instructions. Fusion 360 and STEP files for Printables Club members (please note that these will not be available until the design is finalized). Any updates based on feedback.&nbsp;Can I sell it? Yes, Dummy 13 is distributed under a CC BY 4.0 license that does allow commercial use, provided that you provide proper attribution.&nbsp;If you'd like to say thanks and help support future development, you can make a one-time donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here</a> :)&nbsp;---&nbsp;<h3>Introducing Dummy 13!</h3>(…working title.)This is another variant on <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>, and I actually started designing it before <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13</a> or <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13</a>. As you can probably tell, my goal here was to bring some more humanlike proportions to the figure, while also improving the way everything fits together.&nbsp;My hope is that this will be an easier print than the original Lucky 13, though still a step up from Mini and Easy.&nbsp;<h3>Printing</h3>As with the original, Dummy 13 is made up of an inner "frame" with a layer of “armor” over top. You can use the material of your choice for the armor, but you should print the frame with a strong and sturdy material like ABS, ASA, or PETG. I mostly use ASA.&nbsp;PLA is not recommended for the frame. If you print the frame in PLA and complain that it broke or went floppy, I'm going to be like, “yeah dude, I told you not to.”&nbsp;All parts print without supports and you should not need to reorient anything. Bed adhesion is the toughest part of this print. For better adhesion try slowing down your first layer, printing external perimeters first, and adding a brim if needed. Use 0.15mm layers (0.2mm first layer).&nbsp;You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself. If a part starts with “2x” or “4x,” print that many copies. There are also a couple extra bits (a simple staff accessory and an adapter for the <a target="_blank" href="https://www.printables.com/model/563861-lucky-13-display-base-20" rel="nofollow noopener">display base</a>) that are included separately.&nbsp;Recommended print settings (100% scale, 0.4mm nozzle)<figure class="table"><table><tbody><tr><td rowspan="2">Material</td><td>Frame parts</td><td>ABS, ASA, or PETG</td></tr><tr><td>Armor parts</td><td>Any</td></tr><tr><td rowspan="2">Layer height</td><td>First layer</td><td>0.2 mm</td></tr><tr><td>Other layers</td><td>0.15 mm</td></tr><tr><td colspan="2">Infill</td><td>20% rectilinear</td></tr><tr><td colspan="2">First layer speed</td><td>25% of default</td></tr><tr><td colspan="2">Elephant foot compensation</td><td>0.15 mm</td></tr><tr><td colspan="2">Supports</td><td>None</td></tr><tr><td colspan="2">Brim</td><td>As needed (depends on bed adhesion)</td></tr><tr><td colspan="2">Additional settings</td><td>☑ Print external perimeters first</td></tr></tbody></table></figure>&nbsp;<h3>Assembly</h3>Follow this video for assembly instructions. Pay attention - some parts look very similar!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Rwu3UP0cHZw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Rwu3UP0cHZw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h3>Customizing</h3>Dummy 13 should be compatible with most handheld accessories made for my other designs. Check out Lucky 13's <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">remixes page</a> for a good starting point!&nbsp;&nbsp;This design has already been stolen and stripped of attribution a hundred times over. Please don't add to that.

DUMMY 13 Printable Jointed Figure (beta files)

Dummy 13

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable dragon wand! I made this design for Makerworld dragon contest (3/5). I think it will be a great addition Ornaments and toy for kids for new Dragon year. </h3>&nbsp;<h3>Best wishes to you all! 新年快乐.</h3>&nbsp;This wand takes me a while to design and tests. It takes around 2h33m to print and cost right around 50g filaments.The retractable part is not super rigid, it's by design, I did not put a lot of parameter in there, consider this will most gives to kids to play. So rather it break than hurt somebody.&nbsp;<h2>Update:</h2><h3>v1.5 (1/13/24) - Fix internal parts geometeric issue. (tested) It only applys on P & X Series profile.</h3>Printing profile for P & X Series have found geometric issues on inner parts. Which only occurs when selecting P&X series printers, A1 and A1mini profile doesn't have this issue. Internal parts have been redo. Profile for a1 mini, A1 have remained as v1.4 since it is working correctly.&nbsp;&nbsp;<h2>Detail display:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_161fe41bfd6c.gif"></figure>&nbsp;&nbsp;<h3>My other wand design: </h3>Loong Wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-16_55943d4f3e579.jpg"></figure>&nbsp;Harry Potter Wand: <a target="_blank" href="https://makerworld.com/en/models/68778#profileId-72937" rel="nofollow noopener">https://makerworld.com/en/models/68778#profileId-72937</a> <figure class="image image_resized" style="width:69.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_db6b2ce5b060b.jpg"></figure>&nbsp;<h2>Instruction:</h2>I put very large size of brim on all my printing profile, with 0mm gap to ensure the printing success rate. Since this model is a bit challenge to print.You will required to do some post work of removing brim off. It should be very simple. I have increased gap on first layer from design, so it is tight tolerance, but not super tight.&nbsp;&nbsp;<h2>Materials:</h2>If you are printing with some high shrinkage rate filaments, like some of the silk filament. Due to the sinkage rate different. Your part might slide out or break very easily. So, use some good filaments.&nbsp;<h2>Design:</h2>Let's talk about a little bit of design. The retractable mechanism is very simple, the inner piece is interlocking with outter pieces.<figure class="image image_resized" style="width:24.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_651c54592313e.png"></figure>Style is more challenging<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_37b064643dfb6.png"></figure>Adding more details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_d16c3620c7aab.png"></figure><h2>Printing suggestions:</h2>This is a tall object with very small contact area on first layer. It is challenge to print. It will print without brims, but it fail very easily that way. If you are slicing the model yourself, make sure you add brims, and set brim gap to 0mm. Also increase the first layer thickness.Or, just use those profile that I put there. It all have been tested and confirm works.&nbsp;&nbsp;&nbsp;

Dragon Wand (Retractable) v1.5

Weapons

Joker 3D

I am a big fan of skulls! Have a small collection of 10~ that printed in different shapes and structure. This one printed in Galaxy Black E-Stars PLA (need to get UV lamp to shine it up!) Original Skull model made by <a href="https://www.thingiverse.com/Michaellynn" rel="nofollow">Michaellynn</a> is great but pretty LOW POLY - so had to “clean it” & smooth it. Later on found great crown (CROWN by ALTUGKARABAS) from cults3d & made necessary adjustments that it'll sit perfectly on the skull!Enjoy!

King Skull crown

Skulls

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Cute Dragon 3

Toys

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

For the X1C

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you!&nbsp;Sharon!!&nbsp;Behold…the Prince of Darkness, himself! Complete with head (and headless) companions.&nbsp;Colors used: Bambu Regular Black, White, Purple PLA, Bambu Silk Gold, Silver, Hatchbox Brown, Ziro Skin.&nbsp;

Bricks Ozzy Osbourne

Bricks

T3D Objects

This is one of my watertight vase designs, i print these with Esun clear Petg.

Vase 1

Flowers

FunFam3D

Cosmic Glow in the Dark Gnome.&nbsp;Is he just a regular gnome or an 80's hair metal wizard?! Who knows!Either way he will look great next to your black light posters!&nbsp;&nbsp;Print has a pause at layer 19 to swap filaments.These were printed with Bambu Glow PLA Blue, Pink, and Green&nbsp;

Glow In The Dark Cosmic Gnome No Supports

Gnomes

JAV-3D

3D-Druckanleitung: Miniatur-Bowlingbahn-Set mit Print-in-Place-AufbewahrungsboxEinführung: Erleben Sie mit dem 3D-gedruckten Miniatur-Bowlingbahn-Set eine unterhaltsame Mischung aus Kreativität und Spielspaß. Diese detaillierte Anleitung führt Sie durch den gesamten Druckprozess und bietet nützliche Tipps für eine reibungslose Umsetzung.Teil 1: Bestandteile des SetsStellen Sie sicher, dass Sie alle Teile des Sets ausdrucken:<ul><li>Die realistisch gestaltete Bowlingkugel für präzise Würfe.</li><li>Die 10 sorgfältig gestalteten Bowlingpins für ein authentisches Bowlinggefühl.</li><li>Die speziell entworfene Aufstellhilfe, um den perfekten Abstand der Pins zu gewährleisten.</li><li>Die Print-in-Place-Aufbewahrungsbox, die nicht nur für einen bequemen Transport, sondern auch für eine sichere Lagerung sorgt.</li></ul>Teil 2: Druckeinstellungen und FilamentwahlVerwenden Sie eine 0,4 mm Düse und wählen Sie Ihr bevorzugtes Filament. PLA bietet Flexibilität, während ABS eine robustere Option ist. Passen Sie die Druckeinstellungen an, um die beste Druckqualität zu erzielen.Teil 3: Druckprozess für jedes BauteilDrucken Sie die Bowlingkugel, Pins, Aufstellhilfe und die Aufbewahrungsbox separat aus. Achten Sie darauf, die Druckparameter gemäß Ihren Präferenzen zu konfigurieren.Teil 4: Nachbearbeitung und MontageEntfernen Sie sorgfältig alle Stützstrukturen und überprüfen Sie die Bauteile auf Druckfehler. Montieren Sie die Bowlingbahn, indem Sie die Aufstellhilfe, Pins und Kugel entsprechend anordnen.Teil 5: Individuelle Gestaltung und LackierungExperimentieren Sie mit verschiedenen Filamentfarben, um Ihre Bowlingkugel und Pins einzigartig zu gestalten. Feine Pinseldetails können für eine realistischere Optik hinzugefügt werden.Teil 6: Spielerlebnis und AufbewahrungGenießen Sie spannende Bowlingmomente auf Ihrem Tisch. Die Aufbewahrungsbox eignet sich nicht nur für den Transport, sondern schützt die Bauteile auch vor Staub und Beschädigungen zwischen den Spielen.Teil 7: Teilen Sie Ihre ErfahrungenTeilen Sie Ihre Druckeinstellungen, Designvariationen und Spielerfahrungen mit der Community. Ermutigen Sie andere, ihre eigenen einzigartigen Bowlingbahnen zu erstellen.Zusammenfassung: Das Miniatur-Bowlingbahn-Set bietet ein faszinierendes Zusammenspiel von 3D-Druckkunst und unterhaltsamem Spiel. Diese Anleitung ermöglicht es Ihnen, nicht nur ein beeindruckendes Set zu erstellen, sondern auch Ihre kreativen Ideen einzubringen und mit anderen zu teilen. Viel Spaß beim Drucken und Spielen!&nbsp;&nbsp;English Translation:&nbsp;3D Printing Guide: Miniature Bowling Alley Set with Print-in-Place Storage BoxIntroduction: Experience a delightful blend of creativity and gameplay with the 3D-printed Miniature Bowling Alley Set. This comprehensive guide takes you through the entire printing process and provides useful tips for a smooth execution.Part 1: Components of the SetEnsure you print all components of the set:<ul><li>The realistically designed bowling ball for precise throws.</li><li>The 10 carefully crafted bowling pins for an authentic bowling experience.</li><li>The specially designed setup aid to ensure the perfect pin spacing.</li><li>The print-in-place storage box, offering convenient transport and secure storage.</li></ul>Part 2: Print Settings and Filament ChoiceUse a 0.4 mm nozzle and choose your preferred filament. PLA offers flexibility, while ABS is a sturdier option. Adjust the print settings for optimal print quality.Part 3: Printing Process for Each ComponentPrint the bowling ball, pins, setup aid, and storage box separately. Ensure to configure print parameters according to your preferences.Part 4: Post-Processing and AssemblyCarefully remove all support structures and inspect the components for printing errors. Assemble the bowling alley by arranging the setup aid, pins, and ball accordingly.Part 5: Customization and PaintingExperiment with different filament colors to make your bowling ball and pins unique. Fine brush details can be added for a more realistic appearance.Part 6: Gaming Experience and StorageEnjoy exciting bowling moments on your table. The storage box is not only suitable for transportation but also protects the components from dust and damage between games.Part 7: Share Your ExperiencesShare your print settings, design variations, and gaming experiences with the community. Encourage others to create their unique bowling alleys.Summary: The Miniature Bowling Alley Set offers a captivating interplay of 3D printing artistry and entertaining gameplay. This guide allows you to not only create an impressive set but also contribute your creative ideas and share them with others. Have fun printing and playing!

Mini Table Bowling Set

Games

MadMax3D

These are 80mm diameter spherical lithophanes lit by tealights. There are 4 scenes and two hole sizes (<a target="_blank" href="https://www.amazon.com/gp/product/B009E1UPCE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">35.7mm</a> and <a target="_blank" href="https://www.amazon.com/dp/B07H2ZTL3P?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">29.6mm</a>) for the tealights. Each one takes a little over an hour to print. STL's and .3mf included in the download as well as my print profile. If you want to make a custom hole size, it's very easy to do. Simply adjust the diameter of the negative volume cylinder on the object screen to whatever size you need for your tealights. If you load the models on the plate yourself, you will need to add your own negative volume cylinder. Right click, add negative part, size it for the diameter you want and position it at x0, y0. It should line up with the center of the base.&nbsp;You may see some messages and warnings about the size of the model and floating regions. This is typical with lithophanes and you can safely ignore them.&nbsp;Lithophanes generated at <a target="_blank" href="https://lithophanemaker.com/Lithophane%20Sphere.html#processing" rel="nofollow noopener">www.lithophanemakers.com</a>Art is AI generated using Dall-E 3.&nbsp;Happy Halloween!-Madmax&nbsp;PS. I blame @JamesThePrinter for starting the tealight craze :)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/71092/2023-10-06_f254e7ba9eb978.png"></figure>You can ignore these messages.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/71092/2023-10-06_e0e09c553c3b2.png"></figure>

Halloween Tealight Lithophane Collection

Lithopane

RP47 Designs

Increased this print into a LARGE 4 piece print you can see here: <a target="_blank" href="https://makerworld.com/en/models/448233#profileId-355022" rel="nofollow noopener">https://makerworld.com/en/models/448233#profileId-355022</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max White Transmission Distance: 5.6&nbsp;Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.

Tiger Face Hueforge

Hueforge

Szobyx

For a smaller A1 mini version, follow this link : <a target="_blank" href="https://makerworld.com/en/models/403307" rel="nofollow noopener">https://makerworld.com/en/models/403307</a>&nbsp;Introducing the Ikea Skadis-inspired pegboard, a customizable organizational solution designed to maximize your space in every direction.Crafted from five symmetrical elements, this pegboard system offers endless configurations secured by connectors (though a bit of instant adhesive may come in handy during assembly). Its size is the largest dimensions compatible with the P1/X1 series print bed, allowing for variations in width and height compared to the Ikea version. However, the original Ikea size is not an option.With countless combinations possible, here are a few examples:<ul><li>The &#39;basic&#39; variation consists of 2 A parts and 2 C parts, measuring 440 mm wide and tall.</li><li>The &#39;taller&#39; variation consists of 2 A parts, 2 C parts, and 2 D parts, measuring 440 mm wide and 640 mm tall.</li><li>The &#39;wider&#39; variation consists of 2 A parts, 2 C parts, and 2 B parts, measuring 640 mm wide and 440 mm tall.</li><li>The &#39;extended&#39; variation consists of 2 A parts, 2 C parts, 2 B parts, 2 D parts, and 1 E part, measuring 640 mm wide and 640 mm tall.</li><li>The &#39;infinite&#39; variation allows for limitless customization in 200 mm increments in both with and height.</li></ul>Installation follows the standard methods used for Skadis products, with no additional mounting holes provided to maintain fidelity to the original design. For those seeking a compact solution, there is a highly experimental option to assemble using only the E parts (200×200). These parts can connect with special connectors in the last profile.Happy printing!

Infinite SKADIS original look

Skadis

EMDJ0721

A cute Fox &nbsp;Filament used Sunlu Metallic WhiteSunlu Metallic BlackBambu Orange Protopasta Blood Red &nbsp;&nbsp;

Cute Fox Light

Lightbox

Jameswatts1990

<h2>🧝♀️ Magical Potion Night Lamps and Draws 🧝♀️</h2>Includes:<ul><li>Mana potion</li><li>Health potion</li><li>Stamina potion</li><li>Draw set - including light and potion setting, draw containers and left/right draws</li></ul>Print the potion bottles separately for a subtle and magical addition to any room, or combine with the draws and additional lighting to create a magical night light experience. &nbsp;<h3>Potions</h3>Ideally printed in Bambu transparent PETG, add bottle lights and corks to the potion models for a magical night light. <a target="_blank" href="https://amzn.to/3OHhHn3" rel="nofollow noopener">I recommend these bottle lights from Amazon</a>. The potion bottles print with just 2 walls and at 0.8mm thick they are delicate, so be careful when removing from the build plate. <h3>Drawers </h3>If you want a nice setting for your potion bottles, print out the draw components (setting, container and draws L&R). The setting also has cutouts to input 3x LED Kit 001 lights or similar (easy to find and buy in bulk at sites like Aliexpress). The LEDs will illuminate the potion bottles from underneath for a much larger glow. The draws can be used without the additional LEDs if preferred. &nbsp;The potion bottles will only fit one way on the setting with one of each design type. &nbsp;Try experimenting with different colour translucent filaments for different outcomes. &nbsp;&nbsp;&nbsp;

Magical Potion Night Lamps & Alchemist Draws

Cosplay

FilliFuu

Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs&nbsp;Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed ‘flexi-fit’ chain. The flexi-fit design is an evolving experiment seen in previous models I have released and now been improved upon. It allows a standard articulated design to snap together to remain rigid for posing and support or simply for your own amusement.Improvements include -&nbsp;-Better and easier bridging.-Changed location of socket to allow greater pivoting-Slightly increased join size, tighter fit (can be eased with multiple uses)-Larger and extra walls for strength&nbsp;Still in early development, with your feedback I hope to improve even further for an awesome articulated design that is commonly enjoyed.&nbsp;Note *My First time printing with Bambulab exclusive filamentPrinted with the beautiful PLA Arctic Whisper, PLA Onyx Black Sparkle & PLA Basic Yellow & Red Thank you so much Bambulab for creating this fantastic and beautifully optimized filament.&nbsp;Model contents&nbsp;-Painted and unpainted variations/ miniature scale for A1 mini-Cloud Jumper base model and basic mini wings (for those who wish to use without large wings but choose to fill the wing sockets)-Solid wings, folded and spread, the cover photograph contains one of each, but your free to choose 4 folded or 4 spread if that's what you wish-Flexi wings, purely for fun based upon the ‘NASA fabric’ designs you may have seen by multiple other designers-All STL files associated&nbsp;-Additional profile for the solid wings, to anyone who may encounter issues printing the larger wing. I included this file which lays the wings as flat as possible to the bed, the rear of the wings quality will be likely be impacted and require cleaning, but have zero danger of the print collapsing, print only if you have issues with your tool-head knocking your prints.&nbsp;How to & Assembly&nbsp;Simply print the base model and your choice of wings, selecting whichever printer you are using.&nbsp;Once printed simply insert the wings into the correct sockets being careful not to damage your model, you may wish to lightly trim or sand the ball socket on the wing if required (see pictures & troubleshoot section below) and your done.&nbsp;To use the flexi-fit joins, pull the ball into the clip on each link, can be stiff at first but loosens up each time you use this function.&nbsp;Print is calibrated towards PLA basic. Tested successfully in silk at 120% (CC3C Silk no issues), I am unsure how strong the link will be when printed with silk but its generally not recommended for articulating models.&nbsp;Print Settings&nbsp;Printed multiple times in different sizes & filamentsFor those not using the 3.mf files here is what is recommended…Standard 0.42 wall/ 0.3 used on the outer wall for the main body to increase detail.No brim or support needed on the main file & flexi wings.brim and supports used on the spread wing, the folded wing recommended brim for better corner adhesion4 wall for strength25% gyroid infillz hop 0.4 on the solid wingsWall slowed to 120 however this is entirely up to you depending on what your comfortable printing&nbsp;Troubleshooting&nbsp;-Common problems I often hear can often be easily solved but simply cleaning your 3D print bed so if you have adhesion issues make sure to scrub your plate thoroughly using warm water and soap, rinse with hot water and air dry vertically. IPA is often recommended by most but I personally find standard dishwasher soap to be fine.&nbsp;-Other adhesion issues can be fixed using a brim, but is not recommended unless urgently required or specified in the print settings above.&nbsp;-Tool-head knocks print, I have added an easier print profile with is to be avoided unless required, this profile is labelled 'SAFE' use only if other methods fail. Other reasons for the tool-head knocking the print can be, z-hop required in your slicer settings (turned on by default in my uploaded profiles) Your printer belts may require tightening, carbon rods require cleaning and bearings require lubrication. Calibrate your filament and increases fan speed on your tool-head. If these all fail please use the profile listed earlier.&nbsp;-Ball sockets are too tight to insert, common but the sockets require a tight fit to remain rigid once inserted - its completely fine to lightly sand or even use clippers to slightly trip the ball to allow you to easily insert the socket while remain stable. This may be required depending on which filament you choose to print with.&nbsp;Any other issues please ask and I will help as best as I can, thank you.&nbsp;FIN&nbsp;

Flexi-Fit Cloud Jumper Dragon

Dragons

3D Print Bros

<a target="_blank" href="https://www.tiktok.com/@brady_meets_world" rel="nofollow noopener">@bradyprints on Tiktok</a> challenged the 3D printing community to print the popular <a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">Gyro Fidget Spinner</a> as big as they can, but I couldn&#39;t help but notice there is one glaring issue - as you scale up the model, the tolerances between the spinning rings also scale up, resulting in a wobbly spinner.&nbsp;To combat this, I redesigned it with updated tolerances for a smooth spinning experience. This model is 300% scale of the <a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">original</a>! This behemoth spinner is a true statement piece. Perfect for any coffee table and a great conversation starter. Even looks awesome hung on the wall! Not to mention it&#39;s strangely addicting to spin.&nbsp;&nbsp;<a target="_blank" href="https://cults3d.com/en/3d-model/game/commercial-license-jumbo-gyro-fidget-spinner-v2" rel="nofollow noopener">Onetime payment commercial license available on Cults3D here!</a>  Don&#39;t forget to print the pocket-sized version for fidgeting on-the-go here:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">Gyro Fidget Spinner V2 by 3DPrintBros - MakerWorld</a> &nbsp;And if that&#39;s still too big for you, check out the Micro Gyro:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro Gyro Fidget Spinner by 3D Print Bros - MakerWorld</a><figure class="image image_resized" style="width:34.82%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000393051/design/2024-04-19_e3cf893471adc.gif"></figure>— &nbsp;&nbsp;Now that you&#39;ve printed this glorious piece, put it on display with the perfect stand designed by Stickler:  <a target="_blank" href="https://makerworld.com/en/models/423233#profileId-326399" rel="nofollow noopener">Display Stand - Jumbo Gyro Fidget Spinner by Stickler - MakerWorld</a><figure class="image image_resized" style="width:62.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000393051/design/2024-04-11_9520a9b47d052.jpg"></figure>