Cat-Skills 3d

SugarPaws3D

These little wiggly buddies are super fun to fidget! Designed to print in place with no supports&nbsp;Filaments used:Bambu Labs: Matte Grass GreenBambu Labs: Matte Lemon YellowBambu Labs: Matte CharcoalBambu Labs: Matte Ivory White&nbsp;<a target="_blank" href="https://patreon.com/SugarPaws3D?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Commercial License available on Patreon: SugarPaws3D</a>&nbsp;Notes:The caterpillar models are separated by object so you can delete the pupil if you want solid colored eyes or to remove the spots&nbsp;Pictured caterpillars are scaled at 100% &amp; 70%, you could scale them down more for an army of tiny buggies

Caterpillar Flexi - Articulated Bug Toy

kids

K2_Kevin

<h2>2 Versions!</h2><h2>Bambu Z-Axis Lead Screw Lube Helper!</h2>The Lube Helper tool will apply the perfect layer of lube on the lead screws on z axis.Designed to reach all lead screws on the X1C, P1, and A1 Series Printers.“It&#39;s a lube helper, a lubinator, the lubiest lead screw luber for your 3D Printer!  Introducing the Bam-Lube Tool, a lube helper that spreads the perfect amount of lube.”&nbsp;⭐️Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!<h3>How-To-Lube? Put grease on your tool, then rub your rods.</h3><img class="image_resized" style="width: 52.8%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-31_af3c481da24bd.png">&nbsp;&nbsp;Design Notes:<ul><li>45° - A1/A1 Mini Profile / Version - Allows you to get into that channel on the A1 / A1 Mini</li><li>Perfect angle to apply correct amount of lube</li><li>Comply with my Bambu Tool Set style</li><li>Compatible with my Bambu Tool Set Holder</li><li>Magnet option</li></ul>&nbsp;<ul><li>PROFILE OPTIONS:</li><li>◉ PLA - BOTH TOOLS - Straight and 45° Tool(s)</li><li>◉ A1 Mini PLA - BOTH TOOLS - Straight and 45° Tool(s)</li><li>★️ TPU - (My Favorite)️️️️️️</li><li>◉ PETG - BOTH TOOLS - Straight and 45° Tool(s)</li><li>◉ ABS - BOTH TOOLS - Straight and 45° Tool(s)</li><li>► 45° - A1/A1 Mini - 45° Tool Only</li><li>► PLA - Straight Tool Only</li><li>► PETG - Straight Tool Only</li></ul>&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/478077#profileId-389176" rel="nofollow noopener">https://makerworld.com/en/models/478077#profileId-389176</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/478077#profileId-389176" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-28_d462038107b57.png"></a>&nbsp;Check out more Bambu Tools <a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener">Here</a>:<a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-22_8770b12c5c2fc8.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-22_d4c231e3df5c18.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img class="image_resized" style="width: 52.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-30_50927ad4d1de.jpg"></a>

Bambu Z-Axis Lead Screw Lube Helper

maintain

Ian Foulds

This is a screw on lid that turns your standard mouth mason Jars in into a bird feeder. The hanger was made with bailer twine that happened to match my filament color.Forgive the macramé job, I was winging it. Updated: I would suggest using V2. I found the time to add a lip to each of the outlets so that the seeds don't fall out. &nbsp;

Mason Jar Bird Feeder Lid

outside critters

musicalbigfoot

Venty Stand makes your device more stable while sitting on a table.&nbsp;Choose from the multiple versions of the design depending on your specific use-case:<ol><li>The no-clip versions of the design should allow the device to be placed in and out of the stand without friction. The Venty Stand will remain so you can hold your device without any ergonomic interference.</li><li>The w/clip versions will secure the Venty Stand to the device so you can be sure that it's always safe to set down.</li></ol>All designs have a cutout for the charging port, this really only makes sense for the w/clip versions of the design but it looks nice so I kept it on all versions.&nbsp;There is a Tool Holder version of this design that lets you store the S&B packing/pick tool with your device (seeing as S&B couldn't find a place to keep it inside the device like their other devices)

Venty Stand

dave

<h2>Milwaukee LED Light Box (V2) 💡📦</h2> It is recommended to print the BED CLEANER first!<a target="_blank" href="https://makerworld.com/en/models/78594#profileId-82864" rel="nofollow noopener">https://makerworld.com/en/models/78594#profileId-82864</a> ** USE PROVIDED PRINT PROFILES! THEY HAVESPECIFIC SETTINGS CHANGED TO CLOSE GAPSON FIRST LAYER! ** Drill hole in side or back panel (or cut in slicer) forLED strip light wire. Make sure print bed is CLEAN before printing. REMOVE PURGE LINE RIGHT WHEN THE PRINTSTARTS!! ** NOT FOR COMMERCIAL USE! **For commercial use license visit:<a target="_blank" href="https://ko-fi.com/l3dmodels" rel="nofollow noopener">https://ko-fi.com/l3dmodels</a>  KIRSTY K (3DDirectk) on Etsy does NOT have permission to sell my designs!

Milwaukee Light Box Sign

light boxes

巴巴嘎嘎

RHINO建模 第一次使用這裡 有問題歡迎告知

復古麥克風 RETRO MICROPHONE

regina

OuijaWitch

<h2>Please take the time to read before you print, thank you.</h2>&nbsp;There will be several different profiles 1 coaster, 2 coasters, 4 coasters.&nbsp;You will need double sided tape for this project or I can teach you how to make a hole in the modelin the bambu slicer, all you have to do is reach out and message me on here! I don&#39;t mind questions orhelping people!!!&nbsp;THE MODEL IS LAYING FACE DOWN ON ITS FACE on the build plate for you already! The textured side of the model when you take off your build plate is the front of your model.&nbsp;I do have this model posted on my patreon if you are interested in the commercial rightsto sell. The link to my patreon is posted on my profile.&nbsp;-If you are having adhesion issues, please slow your machine down for the first several layers.-Please use glue adhesive if you are having issues with the print sticking -Message me directly if you need ABSOLUTELY any help or have any questions.

High Maintenance Coaster 

Platinum Leaf

Nils N3DP

Elevate your decor with our Super Mario Question Mark Block Planter! Inspired by the iconic game, this planter adds a playful touch to any space. Whether indoors or outdoors, it's perfect for your favorite plants. Ideal for gamers and plant lovers alike, it's a fun conversation starter and a great gift. Level up your decor with this unique piece!&nbsp; 4 Day Of Fusion Creations in a Raw

Super Mario Question Mark Block Planter

grow tent

Romwba3D

A Cute Gnome / Gonk sitting on his Favorite Toadstool split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both a single plate all in one print and split for 4 plates for single AMS Printing with 4 Colours&nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;Please note the Multi Colour RAW STL Files are designed to be printed all at once by importing into your slicer as a Muli STL and not printed seperatly and glued togeather. If you print them that way they may not fit correctly&nbsp;You can view all the Available Models - now over 250 on https://www.romwba3d.com

Toadstool Gnome

nystea

DaddyWazzy_TheCreator

A James Bond Sighted Lightbox, like the opening credits in most of the movies of past. I used Protopasta Blood of My Enemies for the red, Sliceworx Omni White and Polymaker Black PLA.Any LED strip will work. I used an App controllable strip over a remote one.I put the LED's on the bottom of the base not the sides, the base is deep enough to add a diffuser, included, and it has standoffs built in to spot glue the diffuser on, i used hot glue gun, just a dab. Glue the Hanger 4 back on after you print it.&nbsp;&nbsp;

James Bond Sights Lightbox

lightbox

chippwalters

Use my print profile for best results, I cannot guarantee print profiles by others.<h2>UPDATED 2/14/24</h2>This is an easy to print and assemble stand for both versions of Bambu AMS. All the hardware needed to assemble is included in the print.&nbsp;We now have both the 4-SLOT (legacy) version of Bambu Lab's AMS and NOW the 3-SLOT version (newer) available as well. Be sure to identify which AMS you are using. Look on the bottom of your AMS and identify if there are 3 slots. BELOW is the new 3-SLOT AMS design (bottom view). If your AMS does not look like the image below, then you should use the legacy version.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/592989/2024-02-14_71956062a7b91.png"></figure>If the bottom of your AMS does not look like this, then you should use the legacy 4-SLOT design.&nbsp;Below is a view of the new 3-SLOT wall design. It is actually deeper (wider in the picture) than the legacy 4-SLOT design. So be sure and choose the correct one to print.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/592989/2024-02-14_4f85c72c38b69.png"></figure><h3>NOTE: When assembling the cross braces please be aware the double sided bolt only works in one orientation. So, if it seems like it's too tight, flip it around and you'll see it easily fits.</h3>I know I wanted an AMS stand to free some room on my desk and after reviewing every stand I could find, I realized I'd need to build one myself. BUT… I was inspired by one that was close to what I wanted. It's the AMS stacking stand for P1P and X1 by MihaiDesigns. This stand is NOT a remix but rather a rebuild completely from scratch ground up.&nbsp;I really liked the way the top of the stand fit snuggly into the bottom of the AMS. I didn't like the fact the back wasn't there and you had to purchase metal tubing and fasten it yourself if you wanted it sturdy. Also, I knew I wanted a different look for the stand as well.&nbsp;So, in Blender, I cut off everything but the mounting teeth on top. I then created a different design but kept the same height and same dimensions. I next added a back brace to make it as sturdy as possible. Everything is ready to print in the 3mf including 4 hand-tightened bolts and the X-brace internal screw bolt. There are spring clips designed to work in PLA that reinforce the X-brace. There are some finger notches in the bottom to make it easy to lift the whole thing with the AMS.&nbsp;Print in PLA with no supports.&nbsp;Had a lot of fun making and printing it.

AMS-X Stand for all AMS units

build it

Josh-3D

I present to you today, a poker chip set for Monopoly! With Case!&nbsp;I had a friend that plays poker, but also enjoys Monopoly, and he got me hooked on the idea of using poker chips instead of the paper currency with monopoly. I designed this to be a custom fit set for Monopoly! Along with a case to keep it tidy.&nbsp;The print profiles are setup so there&#39;s 10 poker chips per a plate for each value. All in all you need 30 poker chips per a value. I wasn&#39;t sure if I should set the profiles up to only have one pokerchip on them, or try and cram them all on there. I printed them off in batches of ten though, so decided to keep it like I printed it. Should be easy to adjust for your own needs, if you want more or less. I recommend printing the poker chips on a smooth pei bed!&nbsp;The case comes in it&#39;s own print profile, as there were a number of custom settings setup for the poker chips to make them best. Of note on the poker chips, I set them to 100% infill, so they have a little more weight to them like real poker chips. I also had to adjust a few other settings to make sure the inset on the face facing down, prints nicely. Lastly, the poker chips are setup to us ironing for the top face!&nbsp;[Update] I have produced an A1 Mini version of the case, for the A1 Mini uses. Follow the Link <a target="_blank" href="https://makerworld.com/en/models/436699#profileId-341871" rel="nofollow noopener">HERE for more information</a><figure class="image image_resized" style="width:43.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000155467/design/2024-04-20_a48eace5ac067.jpeg"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Monopoly Poker Chip set w/Case

games

3Deekes

Art Deco R2-D2 HueForge.&nbsp;**Update : I added a new print profile which is a proper 180x180 version of the model. Because of this size it fits in my (and other) 180x180 frames. (<a target="_blank" href="https://makerworld.com/en/models/194571#profileId-215051" rel="nofollow noopener">(Hueforge) Frame 180x180 by 3Deekes - MakerWorld</a>)&nbsp;It also has a much thicker base layer like my later models, it is much more sturdy/easy to remove from the build plate. If you use my profile the first layers of the base get printed at 0.2 layer height which also improves printing speed.&nbsp;Manual Instructions :&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 1mmSwap Instructions: Start with Black At layer #8 (1.28mm) swap to Blue At layer #14 (1.52mm) swap to Jade White for the rest.  &nbsp;&nbsp;&nbsp;&nbsp;My first attempt at my own Hueforge.If you use my print profile the Layer Settings, ColorSwaps, … are already set correctly.&nbsp;I used the classic : Black, Blue and White color scheme. But you can experiment with other colors then Blue for other colored R2&#39;s, please share a picture if you made another/cool color variation. I&#39;m curious to see all variations ! :)&nbsp;If you download the STL of want to set the settings manually please use the settings below :&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmFilaments Used: Elegoo Black Transmission Distance: 0.6 Elegoo Blue Transmission Distance: 4 Elegoo White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #7 (0.44mm) swap to Blue At layer #19 (0.92mm) swap to Jade White for the rest.  &nbsp;Ps : you scan scale the model up/down , just make sure the height doesn&#39;t change , so X/Y no problem but keep Z the same&nbsp;Be sure to check out my other models and/or give me a follow :)&nbsp;Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work: a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on :  <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

Art Deco - R2D2 HueForge

hueforge

squinn

This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches. The strong & stackable design allows you to meet whatever height is needed.&nbsp;This is an easy print that requires no supports, and the STL is oriented as it should be for printing. Three heights are available at 11 cm, 16 cm, and 21 cm tall (the one shown in the pictures is the shortest of the three). All are 10 cm wide, but this model should also easily support scaling as well if you'd like a different size.

Open Cage Stackable Plant Support Stakes

tent garden

Cubic Garden

Dragon Poster Art with CaligraphyGood for wall-hanging or giving out as a gift.Settings are already including in the 3mf file.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PETG PolyLite Gold Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Red At layer #9 (0.8mm) swap to Gold At layer #16 (1.36mm) swap to White for the rest.

Dragon Greeting New Year and Caligraphy (Hueforge)

lonergan89

Donkey kong 3d shadow box 

ShadowBox

digitallyforgeddesigns

Crystal Light Diffuser for 3 inch LED button lights&nbsp;You can find my 3D modeling tutorials on Tiktok @digitallyforgeddesigns

Crystal Light Diffuser

molly and tony

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Cute Dragon 2

dragonsa

Bambu Lab

The 3D model is a specialized tool designed for use with Bambu Lab 3D printers. The tool is a film sticking hand tool, which assists in the process of adhering a film to the printer's build plate. The tool is expertly crafted to provide a comfortable grip and precise control, making it easy to handle and use for prolonged periods.&nbsp;Below is the instructional video on how to use this tool.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=W1EMD77gOkQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/W1EMD77gOkQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Bambu Film Sticking Fixture

bambu labs

Websters Creations

FFA door hanger 

Tara

Nymthiriel

Bluey and Bingo Dance Mode sign. Had a request from my daughter to print one she could flip back and forth. Thought I'd share for other parents out there. There's holes in the back for nails for easy hanging. It doesn't need supports, should bridge without issue.

Dance Mode Wall Sign

3D Prints This Week

Load gray and white into ams.&nbsp;If you change the size, I would suggest keeping the z at 100%.&nbsp;&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Funny Sign / Adulting Review / Wall Art

signs

Makefy

Cute and childish hanging storage bins for your organizing needs. All parts prints beautifully without any supports - I recommend using adaptive layer hight.Bins in the photos are printed with Polymaker PolyTerra: Banana Mint Arctic Teal Candy

Cute Storage Bins

storage

DonMatis

My take trying to create a more realistic 3D using Hueforge. The size is 200x200.&nbsp;Hope you like it :)&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:<ul><li>PLA Overture Black Matte</li><li>PLA Overture Dark Brown</li><li>PLA Overture Light Brown</li><li>PLA Bambu Lab White Basic</li></ul>Swap Instructions:<ul><li>Black until layer #5 at 0.48mm</li><li>Brown until layer #10 at 0.88mm</li><li>Coffee until layer #19 at 1.6mm</li><li>White for the rest. </li></ul>

Cats Sculpt

MEAF designs

ButtPals are your best friends to keep bread fresh. Functional and fun, so be ready for them to spark conversation.&nbsp;You can choose between two sizes&nbsp;&nbsp;Print Settings:Material: PLA / PETG/ TPU Layer height: 0,28 mmNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: no<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_81em4kh19mj5.png"></figure>&nbsp;the resistance is affected by your filament, so you can test reducing or increasing the thickness in "z" according to your needs&nbsp;&nbsp;&nbsp;&nbsp;this is one member of my original "HomePals" collection that you can see here:<a target="_blank" href="https://www.printables.com/es/social/281168-dgoalva/collections/208223" rel="nofollow noopener">HomePals - DgoAlva Colección por dgoalva | Printables.com</a>

kids

maintain

outside critters

dave

light boxes

regina

Platinum Leaf

grow tent

nystea

lightbox

build it

games

hueforge

tent garden

hueforge

ShadowBox

molly and tony

dragonsa

bambu labs

Tara

kids

signs

storage

Art

Kitchen