Beginer

Toys_And_Stuff

This is small and sturdy headset I made for a telephone headset (Jabra Evolve 65 in my case), but it fits many other headsets as well (the headset can be up to 30 mm wide).It is suitable for tables with 18 mm to 30 mm thickness and has a big screw head for easy fastening.&nbsp;If you want your full size headset/headphone on top of your desk, check out my newest design:<h2>Headphone Stand Modular</h2><figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/460950/2024-01-28_7df0db4fe4cab8.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/159580#profileId-175193" rel="nofollow noopener">https://makerworld.com/en/models/159580#profileId-175193</a>&nbsp;If you need only a bigger version of the headset holder, e.g. for a gaming headset, just have a look at the larger brother of this one:<h2>Headset Holder large and sturdy</h2><figure class="image image_resized" style="width:49.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/460950/2024-01-20_922321ff0133a8.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/145728#profileId-158579" rel="nofollow noopener">https://makerworld.com/en/models/145728#profileId-158579</a>&nbsp;&nbsp;Here you can find the above one with a nice Voronoi design:<h2>Headset Holder Voronoi Design</h2><figure class="image image_resized" style="width:50.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/460950/2024-01-25_1d1feaf2decab8.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/156637#profileId-171626" rel="nofollow noopener">https://makerworld.com/en/models/156637#profileId-171626</a>&nbsp;&nbsp;If you want a more futuristic design, you may like this one too:<h2>Headset Holder Hexagon Style</h2><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/460950/2024-01-23_dc42514e0911d8.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/154233#profileId-168605" rel="nofollow noopener">https://makerworld.com/en/models/154233#profileId-168605</a>&nbsp;&nbsp;If you need one for thick desks or benches (up to 50 mm), maybe this one is for you:<h2>Headset Holder XXL Extra Large</h2><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/460950/2024-01-25_e05b4c5ab5884.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/156121#profileId-170958" rel="nofollow noopener">https://makerworld.com/en/models/156121#profileId-170958</a>&nbsp;&nbsp;If you want something that needs lees space have a look at the “under desk” holder:<h2>Headset Holder Under Desk</h2><figure class="image image_resized" style="width:49.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/460950/2024-01-20_b9b3265ff8d268.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/149114#profileId-162697" rel="nofollow noopener">https://makerworld.com/en/models/149114#profileId-162697</a>&nbsp;&nbsp;Happy printing!

Headset Holder small and sturdy

life

kriswillcode

8 grams of filament, 20 minutes to print, and no assembly!&nbsp;Update: I added a new profile for a switch with increased tolerances. It&#39;s less “clicky” than the standard version, but should print easier if you&#39;re encountering problems with the toggle fusing to the body. <a target="_blank" href="https://makerworld.com/en/models/467451#profileId-392548" rel="nofollow noopener">Loose - 0.2mm layer, 3 walls, 15% infill</a>&nbsp;Taking inspiration from my <a target="_blank" href="https://makerworld.com/en/models/66672" rel="nofollow noopener">original fidget toggle switch</a>, I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it&#39;s definitely still a work-in-progress), so please report any issues you encounter.<h3>Print Settings</h3><ul><li>Material: PLA (see below)</li><li>Nozzle Size: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Vertical Walls: 3</li><li>Top/Bottom Layers: 5</li><li>Infill: 15%</li><li>Supports: Nope</li></ul>The switch has been tested with several different filaments. All PLA variants tested (standard, matte, CF, silk, and Plus/Pro/Max) worked great, but standard and CF worked best. PETG was also tested, but the switch&#39;s &#34;click&#34; action wasn&#39;t very strong.&nbsp;The model has some areas with limited bed contact, so make sure you have decent bed adhesion. A glue stick or another adhesive is very helpful here.&nbsp;After printing, you&#39;ll need to &#34;break&#34; the toggle from the axle. This requires a small amount of force, but you should be able to accomplish this using only your hands. You&#39;ll also need to flip the switch a few times to fully wear it in and smooth out the action.&nbsp;I designed the tolerances to be fairly loose for a 0.4mm nozzle. If you&#39;re having trouble with the toggle fusing to the axle, lower your extrusion flow ratio by a percentage point or two. I also added a new “loose” variant with increased tolerances, but the action is less “clicky.”&nbsp;If you print one, please post a make! If you encounter any issues, post a comment. Thanks!

Print-in-Place Fidget Toggle Switch

c.schwan81

Hallo das ist ein Abluftsystem für ein P1S müsst aber auch beim X1C passen !!! der Anschluss ist für 65 mm schlauch ausgelegt !!! auf dem Foto mit den Pfeilen ist ein blauer Pfeil diese Schraube entfernen und durch eine M3 Zylinderkopfschraube ersetzen die Pfeile die rot sind müssen M3 Gewinde Geschnitten werden man braucht nix bohren das Kernloch ist passend für M3 !!!! Ich habe die ganzen Winkel und Halter mit Tesa Powerstrips an die wand geklebt ohne zu bohren !! bei fragen einfach Schreiben !

P1S Abluft System (exhaust)

basic_item

Josh-3D

I present to you today, a poker chip set for Monopoly! With Case!&nbsp;I had a friend that plays poker, but also enjoys Monopoly, and he got me hooked on the idea of using poker chips instead of the paper currency with monopoly. I designed this to be a custom fit set for Monopoly! Along with a case to keep it tidy.&nbsp;The print profiles are setup so there&#39;s 10 poker chips per a plate for each value. All in all you need 30 poker chips per a value. I wasn&#39;t sure if I should set the profiles up to only have one pokerchip on them, or try and cram them all on there. I printed them off in batches of ten though, so decided to keep it like I printed it. Should be easy to adjust for your own needs, if you want more or less. I recommend printing the poker chips on a smooth pei bed!&nbsp;The case comes in it&#39;s own print profile, as there were a number of custom settings setup for the poker chips to make them best. Of note on the poker chips, I set them to 100% infill, so they have a little more weight to them like real poker chips. I also had to adjust a few other settings to make sure the inset on the face facing down, prints nicely. Lastly, the poker chips are setup to us ironing for the top face!&nbsp;[Update] I have produced an A1 Mini version of the case, for the A1 Mini uses. Follow the Link <a target="_blank" href="https://makerworld.com/en/models/436699#profileId-341871" rel="nofollow noopener">HERE for more information</a><figure class="image image_resized" style="width:43.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000155467/design/2024-04-20_a48eace5ac067.jpeg"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

life

toy

basic_item

board_game