Fun tissue box with outer hexagonal structure. Perfect for a hobby room, office, or anywhere else! Comes with a few options in separate print profiles: Solid Bottom Hex Bottom (May be easier to pull finished boxes out / no suction) Vertical Outer Wall (Hexagon points are top and bottom) Horizontal Outer Wall (Hexagon points are left and right) Internal dimensions of bottom piece is 125mm x 232mm x 95mm (height). If you're looking for a square tissue box, please check out my other model!

Ever find yourself needing a downspout adapter after the previous one was embrittled by UV and then you accidentally stepped on it, shattering it into many different pieces, and not wanting to leave the house? Yes! No? Well, anyways, now you have an option to print a replacement at home!

This is a “Y” Splitter for 3D printer fan exhaust. I pair this with AC Infinity fan and extract from my H2S and P1S. Use hose clamps to secure the 100mm / 4" ducting hose. Printed in PETG HF but will upload a profile for PLA. Printed with minimal supports - Can likely get away without any but may need to clean the outside chamfer on the 45° pipe. I use an AC Infinity Cloudline A4 with their flexible 4" ducting.

After several requests, I finally was able to purchase an H2S and release these prints without any need for supports for larger beds. Mainly designed to hold letter-sized papers and documents and keep your desk tidy and free from clutter. Please also see my designed angled inboxes that can mount to walls for additional paper storage. Two heights to choose from: Taller Tray which should fit a full ream of paper Shorter Tray which is more applicable to frequently used items if stacked on top.

Cat litter scoop with filtering holes. Smooth surfaces and textured handle makes this feels nice to hold and use! Long, textured handle to keep far away from the poop! It has a handy hole if you want to mount a hook on a nearby wall when not in use. Prints in place! No support needed.

I'll be keeping this non-exclusive on MakerWorld, feel free to print and use personally or for your friends & family to try. A cover for Abbott's Freestyle Libre 3 and 3 Plus sensors. I use this cover personally to avoid adhesive from sticking on the face of the sensor. Adhesive tape doesn't typically hold up for the full 14/15 days whether it is due to water or sweat, so I can easily replace without much fuss. Thanks for your time, let me know if there are any requests for modification!

“Spark” up your desk, work space, or maker space with this lively little robotic companion to display your cards with charm. Designed with press-fit details for the eyes, nose, mouth, and ears allowing easy of combining different colors on the charming fellow. The card slot is 91mm in length and 8m in depth (not including angled back support), to provide a sleek look and filament-friendly purpose. Please let me know your comments and feedback as well as if there are any special requests!

Version 2 with designed-in support and new connections less likely to snap off!

Sturdy bin that takes up most of a P1 or X1 print bed! 5mm thick sides and bottom, 4 walls, 35% Gyroid infill. 245mm x 230mm x 150mm height. Supports in the handles pop out easily.

Similar to my successful honeycomb / hexagon wall-mounted paper holders, now with lattice / diamond front.

Went through many prototypes - 3D printable Shovel Toy

Test tube and transfer pipette lab equipment, ready for use!

Two Hexagon bowls - One with a solid bottom and the other with small hexagon. Takes a lot of time to print due to all of the hexagons, but made them small enough to reduce the risk of things snagging through or falling.

New Hexagon / Honeycomb phone stand design. Low filament usage.

Stackable baskets with handles with either a solid or smaller honeycomb bottom. Has a handle support designed in the model that easily pops out. Planning to make a taller one (as seen in one of the photos), just need to find time to finish the design. May do a more rectangular version as well if it is popular and wanted. Printed in PLA, no supports since the handle support is built-in to the design.

Large bin with lid and handle that sits flush on top of the bin. Two Sizes (profiles) for the bins themselves: - 145mm x 145mm x 205mm - 145mm x 145mm x 105mm The handle is press fit into the lid, please see diagram below. The handle can be printed on a textured PEI plate without supports (at least for me). I'll be releasing the shorter, matching bins shortly as well as the tea bin in the photos. The coffee cup and lid station is already uploaded

General household storage basket for household goods. 230mm x 245mm x 150mm Releasing several items used for household organization and which I have used for organizing my under sink space - stay tuned!

Holder for small books and phones, mounting to the bedframe. Both Solid and Honeycomb first as 11/16" spacing (my bed) and 50mm length on the arm (just under 2"). Back pocket is 40mm in depth and front is 20mm, and both are 156mm in width. Will be uploading a 1" and 28mm version shortly of the honeycomb, but let me know if you have any further requests. STEP files attached for easy modification, if you make any changes for your bed type please share with attribution!