CTeipen

Kocyns

<h3>Video <a target="_blank" href="https://www.youtube.com/shorts/jN4a0KtUdq0" rel="nofollow noopener">here</a></h3><figure class="media"><oembed url="https://www.youtube.com/shorts/jN4a0KtUdq0"></oembed></figure><h3>Options</h3>You have a choice of 4 designs. Select the design in the selection plate 1-4.<figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_f202a73d30b8d.png"><figcaption>Plate 1</figcaption></figure><figure class="image image_resized" style="width: 50.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_3adce59e9b6ce.png"><figcaption>Plate 2</figcaption></figure>&nbsp;<figure class="image image_resized" style="width: 49.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_f8bf8688ec14e.png"><figcaption>Plate 3</figcaption></figure><figure class="image image_resized" style="width: 49.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_0a11e8805bd22.png"><figcaption>Plate 4</figcaption></figure>&nbsp;<h3>Purchased part</h3><figure class="image image_resized" style="width: 50.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_e0602650ac9c7.png"></figure><figure class="table"><table><thead><tr><th>Part</th><th>Destription</th><th>Qty</th><th>Aliexpress</th></tr></thead><tbody><tr><td>Speaker 10W</td><td>1.5 inch (40mm) 4ohm 10W</td><td>2</td><td><a target="_blank" href="https://www.aliexpress.com/item/32624188122.html?spm=a2g0o.order_list.order_list_main.35.74ea1802FwUI5g" rel="nofollow noopener">here</a> or <a target="_blank" href="https://www.aliexpress.com/item/1005006108375871.html?spm=a2g0o.productlist.main.17.5417HDdoHDdo0I&amp;algo_pvid=54af45b7-42fc-48a3-872c-8093288f0524&amp;algo_exp_id=54af45b7-42fc-48a3-872c-8093288f0524-8&amp;pdp_npi=4%40dis%21CZK%21504.63%21312.93%21%21%2121.27%2113.19%21%402103868817188834485483209ea660%2112000035784465628%21sea%21CZ%214883298268%21&amp;curPageLogUid=mnZmuAojYass&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">here (5W)</a></td></tr><tr><td>Bluetooth module</td><td>MH-MX38</td><td>1</td><td><a target="_blank" href="https://www.aliexpress.com/item/1005005139861504.html?spm=a2g0o.order_list.order_list_main.22.74ea1802FwUI5g" rel="nofollow noopener">here</a></td></tr><tr><td>Passive Diaphragm</td><td>78x41mm</td><td>1</td><td><a target="_blank" href="https://www.aliexpress.com/item/32908199744.html?spm=a2g0o.productlist.main.5.4475KMGPKMGPHI&amp;algo_pvid=7517faa6-9f6f-4c74-8b05-6b3485bd233e&amp;algo_exp_id=7517faa6-9f6f-4c74-8b05-6b3485bd233e-2&amp;pdp_npi=4%40dis%21CZK%21104.43%21104.43%21%21%214.43%214.43%21%40210384b217183995125027946e56c8%2165860302851%21sea%21CZ%214883298268%21&amp;curPageLogUid=9huQmQfrPZve&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">here</a></td></tr><tr><td>Screw</td><td>M3x8</td><td>6</td><td>-</td></tr></tbody></table></figure><h3>Assembly</h3>First, insert the speakers, then secure the two brackets of these speakers using screws. Next, connect the connectors and slide the board into the slot.<figure class="image image_resized" style="width: 50.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_c03b7d5236095.png"></figure>Trim the membrane similarly to how it is shown in the photo. The size and position correspond to those of a USB-C connector.<figure class="image image_resized" style="width: 50.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_607e97685be3a.png"></figure>&nbsp;<figure class="image image_resized" style="width: 49.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_aece062a20d3b.gif"><figcaption>Cover the membrane with the back cover as shown in the animation.</figcaption></figure>&nbsp;

Bluetooth speaker

Musik

Printzee

<ul><li>For the Colored profile: https://makerworld.com/en/models/466526#profileId-375545</li></ul> ------------------------------------------------------------------------------------------&nbsp;Custom keycaps design with infill pattern quick YT short for the design process:  <figure class="media"><oembed url="https://www.youtube.com/shorts/oGBkGEh9kT0"></oembed></figure>

Infill Custom Key Caps

Keyboard

ABDELat

Fast and easy to print Gridfinity Base for <a target="_blank" href="https://www.ikea.com/at/en/p/alex-drawer-unit-white-00473546/" rel="nofollow noopener">Ikea Alex Drawer (36x70 cm)</a>. The printfile contains 5 plates with all necessary parts for 1 drawer.If your looking for bins, I&#39;ve an <a target="_blank" href="https://makerworld.com/de/models/47599" rel="nofollow noopener">ultimate collection</a> for that.<ul><li>Plate 1<ul><li>Grid 4x5</li><li>23x Connector (22 needed + 1 spare) optional</li></ul></li><li>Plate 2<ul><li>Grid 4x5</li></ul></li><li>Plate 3<ul><li>Grid 3x5</li><li>Grid 2x4</li></ul></li><li>Plate 4<ul><li>Grid 3x5</li><li>Grid 2x3</li></ul></li><li>Plate 5<ul><li>Spacer</li></ul></li></ul>PLA printtime: ~3:55h and 116,9g material (single color)PETG printtime: ~4:25h and 115,0g material (single color)&nbsp;I recommend to put the 2 small grids and the spacer in the back of the drawer.The grid can be printed in PLA or PETG. I recommend 0.4mm nozzle and 0.2mm layer height.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;Source: <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity Base</a> <a target="_blank" href="https://www.printables.com/model/535032-gridfinity-ikea-alex-spacer-with-snap-connectors" rel="nofollow noopener">Spacer</a>&nbsp;<h4>A1 mini Edition:</h4>I&#39;ve included a profile for all A1 mini user out there. Basically you&#39;ll need three 4x4-Grids and three 3x4-Grids. The Spacer is cut in half, so it fits the print plate. You don&#39;t need to glue them together. Just use some connectors. The connectors are optional. You just need them if you don&#39;t fill the drawer space all with bins.<h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.

Slim Gridfinity Base for Ikea Alex Drawer

Gridfinity

Björn Heirman

Simple screwdriver holder for Ikea skadis pergboard system.back row: 5 x 12mm holesfront row: 4 x 8mm holesSkadis_Universal_Hook.stl credit to <a target="_blank" href="https://www.thingiverse.com/thing:2853257/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2853257/files</a>It has a bit of a loose fit with these, so mount the universal hooks to your skadis board first, and then hang the holder on them.

Skadis Screwdriver holder

Skadis

AMT_MW

<h2>What it is</h2>A light dot, light sign or neon sign utilizing <a target="_blank" href="https://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">Bambu Labs LED Lamp Kit 001</a>.Via the “Text shape” tool in the slicer, both variants are customizable in text and font.<ul><li>Simple lid style → usable diameter = 63mm = 2.48″</li><li>Lid with silver top ring from the kit → visible diameter = 47.5mm = 1.87″</li></ul><h4>Why</h4>I spent some of my first hard earned points on MakerWorld on one of these LED Lamp Kits. - Lo and behold, I did not need another lamp…So I decided to make something else with it and this is one of the results.<h2>How to customize</h2>Make sure the font you want to use is installed on your system and available in your slicer (Bambu Studio shown here).<ul><li>Windows → the font must be installed for all users</li><li>macOS → the fonts must be located in /Library/Fonts and NOT ~/Library/Fonts <a target="_blank" href="https://github.com/bambulab/BambuStudio/issues/818#issuecomment-1807499852" rel="nofollow noopener">(read further)</a></li><li>Linux → ?</li></ul>Then<ul><li>Open the provided 3mf file and select the “text_shape” body part. <img src="https://makerworld.bblmw.com/makerworld/draft/455367/2023-12-21_0420fb1a883ba.png"></li><li>Use the Text shape tool to edit the writing to your desire. <img src="https://makerworld.bblmw.com/makerworld/draft/455367/2023-12-21_75c55e6d411bd.png"></li><li>Mind to redefine the offset of the text → x=0, y=0 is centered, the z coordinate allows you to create things like hidden lettering until the light is turned on (current bug: the term “World coordinates” is wrong in case a modifier/text is selected…) <img src="https://makerworld.bblmw.com/makerworld/draft/455367/2023-12-21_623da560aedc6.png"></li><li>To dim the brightness or gain certain color effects (<a target="_blank" href="https://en.wikipedia.org/wiki/Color_mixing" rel="nofollow noopener">additive & subtractive color mixing</a>) the emitted light can be adjusted by replacing the original diffuser with optionally printed ones.</li></ul><h2>How to print</h2>In case this isn't obvious, at least one filament used should be somewhat translucent. Recommended for printing is a 0.2mm layer height and a 0.4 mm nozzle. For the material, I opted for PETG and would advise against PLA (temperature of my LED Kit went up to 55°C). → This item may be tricky to print due to shrinkage, volumetric flow, … which all impact the desired fit to the metal parts. Some scaling in the xy-plane may be required. If you had to scale it, please report back including material and scaling factor used.The provided print file should be sufficient. General tips for this design:<ul><li>Print slow</li><li>flow ratio spot on or leaning towards +1% over usual</li><li>bed adhesion must be good, first layer defects will catch the eye straight away</li><li>colors should be pure (if you struggle with this: <a target="_blank" href="https://makerworld.com/en/models/62782#profileId-69555" rel="nofollow noopener">AMS Calibration - V2</a>)</li></ul><h2>What next</h2>There may be improvements and modifications based on feedback given here.Maybe, take a look at <a target="_blank" href="https://makerworld.com/u/2797532051" rel="nofollow noopener">my other designs</a> ;-)

LED Kit 001 to custom Light Sign

LED Lamp 001

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Tonie

humebeam

Buy Hydra AMS&nbsp;You can now buy the Hydra AMS printed parts and required bolts from MatterHackers at a very affordable price, free US shipping is included. &nbsp;<a target="_blank" href="https://www.matterhackers.com/store/l/hydra-ams-spool-adapter-for-bambu-lab-automatic-material-station" rel="nofollow noopener">Buy Hydra AMS at MatterHackers (United States)</a>&nbsp;It is also available from Australian partner JC-3D:&nbsp;<a target="_blank" href="https://jc3dmelb.com.au/products/hydra-ams-enhanced-for-bambu-lab-ams" rel="nofollow noopener">Buy Hydra AMS at JC-3D (Australia)</a>&nbsp;Hydra AMS has a strict non-commercial license, it can only be sold with licensing through Hume Beam Engineering Solutions.&nbsp;About&nbsp;Download the files then follow the assembly guide a bit down on this page.&nbsp;Optional but recommended files to print:<ul><li><a target="_blank" href="https://www.printables.com/model/455176-hydra-ams-silica-dry-boxes-serial-number-tags" rel="nofollow noopener">Hydra AMS - Silica Dry Boxes / Serial Number Tags</a></li><li><a target="_blank" href="https://www.printables.com/model/530298-hydra-ams-improved-rear-rollers" rel="nofollow noopener">Hydra AMS - Improved Rear Rollers</a></li><li><a target="_blank" href="https://www.printables.com/model/410903-hydra-ams-ptfe-load-buttons" rel="nofollow noopener">PTFE Load Buttons</a> to both save the funnels and improve ergonomics.</li><li><a target="_blank" href="https://www.printables.com/model/402087-adjustable-spool-holder-for-silica-gel-spool-weigh" rel="nofollow noopener">Adjustable Spool Holder for Silica Gel / Spool Weight</a> - Compatible with both Hydra AMS and Bambu Lab AMS.</li></ul>If you download the individual 3MF files in the files section, they are design files only and can be easily printed on any printer / slicer. If you get a warning that they do not come from Bambu Lab just ignore the warning, they were exported directly from my design software.&nbsp;Thanks to the testers for all the support and especially GuyH who has been instrumental.&nbsp;Leave feedback in the comments, cheers!&nbsp;Reviews on YouTube&nbsp;Nero 3D<figure class="media"></figure>MandicReally (Hydra starts around minute 5.40)<figure class="media"></figure>Support&nbsp;All my designs and mods are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)<ul><li><a target="_blank" href="https://www.paypal.me/humebeamengineering" rel="nofollow noopener">https://www.paypal.me/humebeamengineering</a></li></ul>If you prefer Crypto/BTC you can send me a message.&nbsp;If you send a donation be sure to mention Hydra AMS in the comments box and you will be added to the list below.&nbsp;Official Supporters&nbsp;If you have donated $5 or more you will be added to this list as an official thank you from me and you will also be assigned a serial number, the list will be updated as often as possible.&nbsp;You can request a custom serial number if you send a $20 donation or more but please be aware it may take a couple of days before your custom silica box is uploaded as I need to make these manually.&nbsp;If you&#39;ve bought Hydra from one of the authorized resellers you can also request a serial number by submitting a proof of purchase.<ul><li>Hume Beam #0001, Hume Beam #9999, Sven Hausherr #1313, Aaron Gray #1337, FireBall #1725, Trevor Mungovan #2425, Jamie Placzek #4759, 57y10 #8764, Katherine Jones #0666, Bernhard Birkfellner #3101, Guy H #0002, Kevin Pereira #0003, Phill Tran #0004, Bernard Ruf #0005, Justin Altemeier #0006, Remigiusz Kowal #0007, Jerome Grimminck #0008, Anthony Cascone #0009</li><li>Thomas Finzel #0010, Seldon3dPrinting #0011, Dwizzle Roasting #0012, VipCold #0013, Bearded Bucket #0014, Hannes Schäfer #0015, Joseph Korang #0016, Brian Welty #0017, Elmar Wesle #0018, Paul M #0019</li><li>Pippo pewte.ch #0020, Hampus Björk #0021, Martin Watley #0022, Riccardo Sacchetti #0023, James Majors #0024, Raia Gennaro #0025, Christopher Walters #0026, Andrew Shrapnel #0027, Kevin Kent #0028, Aron Gustafson #0029</li><li>Szabó Tibor #0030, Nikhil Ramkarran #0031, Dorothy Rafferty #0032, Charles Ho Fung #0033, Anup Chavda #0034, Dorian Picard #0035, Mark Berg #0036, John Vinson #0037, Robert Martin #0038, Karl Liljeström #0039</li><li>Kurt Althaus #0040, Martin Ziegler #0041, Miguel Contreras #0042, Todd Ferguson #0043, Joseph VonDohlen Jr #0044, Jacob Wine #0045, H. Schittko #0046, Rex Catron #0047, Meatbingo #0048, Barry Kwan #0049</li><li>GnollProblem #0050, Sean Griffiths #0051, Yannick Lory #0052, Bonnie Gulliver #0053, Aki S #0054, Jeremy Rauch #0055, Jim Fano #0056, Jeffery Stephens #0057, Kimberly Booth #0058, Mikael Olsson #0059</li><li>Michael Fetting #0060, James Beck #0061, Christian Bätz #0062, Eric Ridge #0063, Christopher Ondrovic #0064, Stefan Wollmuth #0065, Anthony Soprano #0066, Andreas Riebe #0067, ServTheNet #0068, Alan Kilgore #0069</li><li>Gene Buckle #0070, Phil Harvey #0071, Neal Baggett #0072, Vincent Robel #0073, Zachery Hansen #0074, Matthew Shaw #0075, Scott Marcy #0076, Steven Lionel #0077, John Cardwell #0078, Chris Martin #0079</li><li>Łukasz Szuman #0080, Ron Allison #0081, Bella Art de Nicole #0082, 7iron #0083, JKP Enterprises #0084, Klaus Löhr #0085, Harley Hong #0086, SSI Racing #0087, Chris McLeod #0088, Steven Mohr #0089</li><li>Worked Wood #0090, David Adam #0091, Michal Kowalski #0092, Custom Computer Concepts #0093, Kenneth Ostromek #0094, Stigh Aarstein #0095, Patrick Lavoie #0096, Jeremy Hopke #0097, Erik Johansen #0098, Djundi Karjad #0099</li><li>Jason Litman #0100, Robert Jorgenson #0101, Edward Cartier #0102, Robert Pence #0103, Andres Arrieta #0104, SpriteForge.com #0105, HRtechnik llc #0106, Swen Krauter #0107, Michael Bush #0108, Jordan Newman #0109</li><li>Jared Stymiest #0110, Andreas Klotz #0111, Jordan Joiner #0112, Fred Logue #0113, Gregory Carlton Bouten #0114, Nicholas Daniel #0115, Eric James #0116, Rutger Bogaerds #0117, AtomicFilament #0118, Kevin Clack #0119</li><li>Letusgo2Hell #0120, Gaspard Grosjean #0121, Poppy&#39;s Popcorn Co. Inc. #0122, Tony Herrero #0123, William Aprea #0124, Troy DeJesus #0125, Justin Schuhmann #0126, Belenos #0127, Jack Mettler #0128, Barracuda72 #0129</li><li>Oz_Rob #0130, Ben Silber #0131, fatgeek #0132, Bernt Ahlbäck #0133, Joshua Warren #0134, Thomas Heuer #0135, Thomas Schulz #0136, William Hamilton #0137, Todd Schisler #0138, Phillip Perry #0139</li><li>guruguys #0140, Johannes Cornelissen #0141, Jan Schermer #0142, John Kaminski #0143, SaintHate #0144, Josiah Netherton #0145, Steve Beverley #0146, Boran Li #0147, Jeff ONeil #0148, Joseph Palicke #0149</li><li>Massimiliano Mancin #0150, Patrick Pennza #0151, Donald Lafferty #0152, Big Brook Pond Engineering #0153, Robert Schwinn #0154, Jacob Perez #0155, MIcheal Jeffrey #0156, Brett Corr #0157, Chris Reed #0158, Boris Ott #0159</li><li>John M Murphy Jr #0160, Jose Serrano #0161, Peter Lewis #0162, Christopher Phillips #0163, Tyler Wickline #0164, Integrated Overland #0165, fixumdude #0166, Nic Alkema #0167, Torsten Steckenreiter #0168, Francisco Peebles #0169</li><li>Jens Michlo #0170, Jon Libby #0171, Eric Sutherland #0172, Andrew Poth #0173, Mercury Cubed #0174, Louis Watermeyer #0175, Michael Müller #0176, kirikugo #0177, Markus Lohmann #0178, Stefan Zuegg #0179</li><li>Thomas Kotowski #0180, James Hunt #0181, Marc Schauber #0182, Kenneth Ostromek #0183, Jakub Kanhäuser #0184, Ants-3D #0185, Ronny Stiffel #0186, John Cooley #0187, Christian Noack #0188, Christian Menz #0189</li><li>David Bernabeu #0190, Christopher Mallery #0191, Ralf Ehleiter #0192, Andrew Wickham #0193, David Rouleau #0194, Bruce Milyko #0195, Sean Stoube #0196, Peter Biegel #0197, Dominik Popp #0198, @3dprintkings #0199</li><li>samwiseg0 #0200, Susan Alvarez #0201, Thomas Jameson #0202, Benjamin Achtenberg #0203, Stephen McComas #0204, Volker Alkemper #0205, Daniel Pomierski #0206, Hagen Weigel #0207, Lex Hanna #0208, Dannel Albert #0209</li><li>Jeremy Birdwell #0210, Jeremy Birdwell #0211, Jeremy Birdwell #0212, Jeremy Birdwell #0213</li></ul>Get a Silica Dry Box with your serial number here:&nbsp;<a target="_blank" href="https://www.printables.com/model/455176-hydra-ams-silica-dry-boxes-serial-number-tags" rel="nofollow noopener">Hydra AMS - Silica Dry Boxes / Serial Number Tags</a>&nbsp;Thanks again!&nbsp;If you want to remain anonymous, leave a note with your donation. If I&#39;ve missed your donation let me know.&nbsp;About - Continued&nbsp;Hydra AMS is an enhanced drop-in main body replacement for the Bambu Lab AMS, a multi filament companion to the Bambu Lab X1, X1C and P1P printers. The Bambu Lab AMS internals are used, you just need to move over the parts; the four feeder motors, the rear motor, the front and rear rollers, the RFID boards and the main board as well as the PTFE tubing and cables.The name Hydra is inspired by the mythological creature which grew two new heads as one was cut off, similar to how the AMS&#39;s tend to duplicate if you don&#39;t keep a firm grip of your wallet. I have other designs with names from Greek mythology (<a target="_blank" href="https://www.printables.com/model/130789-icarus-2-qidi-x-max-x-plus-i-mate-x-maker-carriage" rel="nofollow noopener">Icarus</a> / <a target="_blank" href="https://www.printables.com/model/59209-hercules-qidi-x-max-carriage-for-bmg-dragon-e3d-v6" rel="nofollow noopener">Hercules</a>) so I thought it was fitting.Hydra prints completely without supports and no extra parts are required for assembly, it uses dovetail joints for assembly and utilizes the standard AMS outer casing as well as maintains RFID compatibility. 4 x 20 mm cap head M3 bolts is recommended to ensure the three parts interlock and won&#39;t slide apart.&nbsp;The main changes / improvements over the standard AMS are:<ul><li>Increased spool widths, up to 75 mm, meaning most 1 Kg spools will fit.</li><li>Increased spool diameters, up to 202.5 mm diameter spools fit.</li><li>Adjustable spool rollers in four positions for 120 mm to 205 mm diameter spools. Large diameter spools (&gt; 201 mm) require a printed <a target="_blank" href="https://www.printables.com/model/367620-bambu-labs-ams-lid-spacer" rel="nofollow noopener">TPU lid spacer</a> if you want to close the lid, just like the normal AMS.</li><li>AMS feeder / motor mechanism angled five degrees backwards to allow printing of full spools.</li><li><a target="_blank" href="https://www.printables.com/model/410903-hydra-ams-ptfe-load-buttons" rel="nofollow noopener">PTFE Load Buttons</a> to both save the funnels and improve ergonomics (optional, it&#39;s a separate download)</li></ul>BOM - Bill of Materials&nbsp;You can print Hydra AMS in just about any filament you like. However, if you plan on keeping the AMS on top of the printer it&#39;s best to print it in ABS or ASA as the heat from the printer can soften the printed Hydra parts if they are printed in PLA for example. Around 600 g of filament is required at the recommended print settings.&nbsp;I&#39;ve printed most of the test builds in Prusament ASA, PLA and eSUN PLA and ABS+, both brands and filament types work great.&nbsp;Filament<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DllSAvT" rel="nofollow noopener">eSUN Luminous Green</a></li><li><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-prusa-galaxy-black-1kg/" rel="nofollow noopener">Prusament Galaxy Black</a></li></ul>Fasteners&nbsp;You need some M3 hex bolts (socket head), I recommend 20 mm but just about anything between 15 and 25 mm should work. If you don&#39;t have any at home it&#39;s best to grab the kit below, it will have everything you need for this build and many more.<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DFu1g2N" rel="nofollow noopener">1100 pcs M3 Hex Socket Head Cap Kit</a></li></ul>Optional&nbsp;I highly recommend these Nano Coated Helical Extruder Gears from FYSETC, I use them for all my Bambu printers, they&#39;re inexpensive and offer a number of improvements of the stock gears:<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DDnCqyD" rel="nofollow noopener">Extruder Gear for Bambu X1/P1P/P1S CNC Nano Coating</a></li><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DnKG6yD" rel="nofollow noopener">Extruder Gear for Bambu X1/P1P/P1S CNC Nano Coating (Alternative Source)</a></li></ul>Although not required these PEO/PEI/PEY bed sheets are great, I have most options myself, it gives a quite cool look on the first layer. There are a few shops offering different plates:<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DCwYeJF" rel="nofollow noopener">Build Plate PEO/PEI/PEY Spring Steel Sheet (Super 3D)</a></li><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dd4HOjb" rel="nofollow noopener">Build Plate PEO/PEI/PEY Spring Steel Sheet (IdeaFormer)</a></li><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DEJIFPP" rel="nofollow noopener">Build Plate PEO/PEI/PEY Spring Steel Sheet (Juupine)</a></li></ul>The Hex Tools are superb for any 3D printer, I&#39;ve had mine for years. They are particulary useful for the Hydra assembly.<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DF0w38V" rel="nofollow noopener">Hex Tools (1.27 mm - 3.0 mm)</a></li></ul>

Hydra AMS - Enhanced Bambu Lab AMS

Rundum 3D Drucker

RestoreDoctor

50mm Tape cutterYou can use part 3 or 4 to secure.<ul><li>0.20mm Standard </li><li>no support needed - parts orientation see below</li><li> PETG / ABS</li></ul>&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/511897/rich_content/2d45144d-6c1e-4578-99c3-e958f040405e/thumbs/cover/800x575/png/tape.webp"></figure>

50mm Tape Dispenser Cutter

Praktisch

DonMatis

One Piece wall art for decoration, can be painted with more colours after.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA+ Sunlu Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA Bambu Labs Basic White</li></ul>Swap Instructions:<ul><li>Black until layer #5 at 0.48mm</li><li>Gray until layer #10 at 0.88mm</li><li>Light Gray until layer #19 at 1.6mm</li><li>White for the rest.</li></ul>

One Piece (fanart) - Hueforge

Hueforge

ExVitamiN

Mini ESP8266 Case specially for use with addressable led strips.&nbsp;It is very small and precisely fitting, perfect for use with addressable LED strips (with WLED). Its compact design makes it easy to hide or attach.&nbsp;It is great for 1-2m strips powered by 5v chargers.&nbsp;I printed it in PETG as an ESP8266 also produces a bit of heat so there are no warping issues.&nbsp;I run the case with the ESP8266:<a target="_blank" href="https://amzn.eu/d/chfO2Ba" rel="nofollow noopener">https://amzn.eu/d/chfO2Ba</a>&nbsp;The text was translated using Google Translate.