Bumony

MBRS

I saw many people used my other creation, the standard desk cable holder, as a way to tidy up passing cables. Since I believe that model is not optimal for that use, I created this version which fits various sizes of cables and in bigger quantities. It is also thinner which makes it ideal behind desks. The size is universal and is compatible with desks up to 40 mm in thickness (though if you have a thicker desk, nothing stops you from scaling Z a little bit).Screw is now optimized and scaled 97.5% from the original model. Should fit nicely with a slight effort on first assembly. Print is quick, about 40 mins, and only uses 18 g of plastic for both clamp and screw. PLA resists fine for me, but you're free to try stronger materials.Let me know if you like it! (Supports in the print profile are very easy to remove, they can be removed in one pull.) 05/01/24 FIXED TOLERANCES

OPEN Desk Cable Management Holder / Organizer 

收纳

Oosh Proto

The Manual Material System is made to fit 4 x Filament spools.Each spool can be manually fed through one of the four corresponding holes, through the internal Filament Duct where it protrudes out one single exit point at the rear of the Manual Material System. From there the filament feeds directly into your printers extruder.The manual Material System is designed to work with the Oosh Proto Filament Spool holders that have smooth bearings integrated into them for each filament spool. This design allows a significantly low friction point between the spool holder and the filament spool so your printer is doing less work and is subjects to less wear and tear on its mechanical parts such as the buffer or extruder/hotend.Below the Manual Material System there are 5 x Bambu Lab build plate draws to keep your build plates protected and all in order with an additional 2 x side drawers for miscellaneous tools and consumables. This Material Management System is designed to fit perfectly on top of the Bambu Lab X1C, P1P and P1S. (Or beside your pinter on your desktop)&nbsp;There are various spool holder sizes availible to download on ou rdesign page that fit into the top of the buildplate holder. It is also designed as part of our modular storage system so our Manual Material System will lock in place on top of the Oosh Proto build plate storage if you're printing without the AMS and plan to us our Material Management System onto of your printer.We used TPU95A for the feet so it will stay in position on the Bambu Lab glass top(We also think this looks aesthetically pleasing next to your Bambu Lab printer or next to you on your desktop)

Bambu Lab MMS Build Plate Storage

printers

Sven97

<ul><li>3 hooks in the back to ensure the attaching strength on pegboard</li><li>25 degree tilt angle for a better display of the object</li><li>No support needed in printing to ensure a smooth surface</li><li>Can be used individually to hang headphones, or in pairs to store longer things</li><li>Easy to attach and move, no tools needed </li></ul>&nbsp;

收纳

printers

IKEA