Bukem

0.2mm layer, 4 walls, 15% infill

0.2mm layer, 3 walls, 15% infill

Jewelry Hanger

0.2mm layer, 2 walls, 10% infill

Clip-on Lightbar for Bambu Lab A1 - BIQU Panda Lux

0.2mm layer, 3 walls, 10% infill

Interprox Dental Brush Holder

0.2mm layer, 2 walls, 15% infill

The Saucer Pass Ice Hockey Puck - no AMS needed!

Puzzle Box for 7 Piece Cubic Puzzle

Tom Timmerman

Hockeystick keychain

焊锡夹具（1小时快速打印、仅30g）

Soldering Iron Holder (1-Hour Fast Print, Only 30g)

TimothySt

Rotating Filament Swatch Display - Bidirectional

Adaptive layer height for minimal time and no sanding

Nice print and good print profile, especially with the adaptive layer height. Slots could do with 0.1mm of additional clearance for smooth operation.

Kosau

Cable guide for A1 and A1mini (Using ptfe :P)

0.2mm layer, 2 walls, 20% infill

Love the clips. Does what it needs to do.

arnoutdc

7 Piece Cubic Puzzle

0.12mm layer, 2 walls, 15% infill

Great model, well designed and lots of fun to solve. You might want to consider developing a 4x4 or 5x5 puzzle for an even bigger challenge. Loved it so much that I designed a custom case for it which happens to fit like a glove ;-)

Jonas Tae

Batterydispenser AA or AAA for Ikea Skadis with T-Nut-System

AAA Version - 0.2mm layer, 2 walls, 10% infill

Wow, this model is so much better than the alternatives on Makerworld. Fit is fantastic. Kids love it as well, reminds us of a marble track. Printed both the AA and AAA versions.

AA Version - 0.2mm layer, 2 walls, 10% infill

needitmakeit

Bambu Lab Universal Spool Center Desiccant Holder

0.2mm layer, 1 walls, 0% infill

Fantastic model, very clever design and printing strategy. Please consider offering this model in lower heights so it doesn't stick out too much when used with a spool in a vacuum bag.

ThreeD-Michael

Poop Deflector (A1 + A1 Mini)

PETG ~ 24mins ~ 4g ~ 0.2mm layer, 2 walls, 15% infill

eljkaer

A1 Purge Poop Bucket

The rear corner which hugs the gantry could do with a tad more clearance. Alternatively. perhaps follow a straight line with a curve to the left so it does not fully conform to the gantry profile.

kriswillcode

Print-in-Place Fidget Toggle Switch

Concentric top layer, Much prettier