Buffett

sipura

Hello,&nbsp;So far we have made 3 different boxes on the same theme.Well, this is our 4th, which is intended for pills.In the utility case there is also an additional inner cointainer with a separate lid, so that you can take out the pills individually for each day.&nbsp;Also, we have another model that has a different inner cointainer, so you have a choice that suits you better.&nbsp;Simple and easy print like other ones.&nbsp;All parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp; To assemble it, you need:3pcs M3 nuts1pcs of screws M3x30mm2pcs of screws M3x20mm&nbsp; I hope you like it, and enjoy printing and using this useful case.I expect your pictures of printed models in the comments :D Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio. Enjoy printing :D

Utility XS - case

配件

Benjamin Kott

Stackable Storage Bin/Box (Fully Parameterized) with Fusion 360 Source Files.&nbsp;Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all dividers are auto-calculated and evenly spaced, this also applies to an auto-calculated label size. There is no need to fiddle around with manual settings, define the basic parameters, and watch the magic math 😊.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/f96xw8hRov4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/f96xw8hRov4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Features</h3><ul><li>Dividers for width and length</li><li>Insert for a label</li><li>No support</li><li>Reinforced Corners for better stability</li></ul><h3>Customizable Parameters</h3><ul><li>Length</li><li>Width</li><li>Height</li><li>Corner Radius</li><li>Wall Thickness (recommend 1.2mm for smaller / 2mm for big boxes)</li><li>Divider Size</li><li>Baseplate Height</li></ul><h3>Print recommendations</h3>If you are not using the provided print profiles, set the bottom layers to 5 - otherwise, the base can be too fragile. Do not scale the model up and down in the slicer, if you need a different size - ask for it or use the Fusion 360 Raw file to customize it yourself.&nbsp;There are 3 build plates per print profile:<ul><li>Box</li><li>Divider 1 With (left to right)</li><li>Divider 2 Length (front to back)</li></ul>Only print the dividers if you need them, and duplicate them on the plate so you get the amount you need.<h3>Print your labels</h3>The label sizes are noted in the print profiles. If you are 3D Printing your labels, the height of the baseplate of the label needs to be 1mm. Use Make My Sign to create your own: <a target="_blank" href="https://makerworld.com/de/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/de/makerlab/makeMySign</a>But maybe a piece of paper is enough 😉.<h3>Why another Stackable Storage bin model?</h3>It is the same issue with most other models; the designs are static.I need a model flexible, that can easily adapt to any size I need without slicer scaling compromises.I like to build stuff and love solving problems 😅.<h3>Timelapse</h3><figure class="media"><div data-oembed-url="https://youtu.be/So26t3TSLrM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/So26t3TSLrM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>More Fusion 360 Parameterized Models</h3><ul><li>Organizer Box <a target="_blank" href="https://makerworld.com/en/models/103266" rel="nofollow noopener">https://makerworld.com/en/models/103266</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>

Storage Box / Boxes Stackable

机器人

torben_j

<a target="_blank" href="https://makerworld.com/en/models/186047#profileId-204772" rel="nofollow noopener">**** NEW AND BIGGER VERION MADE FOR M3 FASTENERS IS NOW AVAILABLE ****</a>&nbsp;Bambu Lab ToolBox - The Trusty Companion for Every Task! - No additional hardware is needed aside from the printed parts. This small yet mighty toolbox is the perfect place to store all your 3d printer related tools. Its compact size makes it easy to carry and store, making it an essential addition to your home, office, or workshop. Featuring a sturdy handle for comfortable grip, this toolbox opens to reveal a well-organized interior with designated compartments for various tools. Whether you're a DIY enthusiast, a hobbyist, or someone who appreciates having essential tools at their fingertips, this toolbox has you covered.The thoughtfully designed layout ensures easy access to all compartments, so you can get the job done without any hassle. From minor repairs to creative projects, this small toolbox is your go-to companion. Its versatility makes it suitable for a range of tasks, and its compact design means you can take it wherever your projects lead you. &nbsp;Assembly guide What you need:1 Big compartment  2 Small compartments  2 Lids (with or without logo)  2 Handles 8 support arms 24 Small end caps 24 Big end caps 1 meter of filamentSuper glue Step 1:Press about 2cm of filament through the small end cap and one of the support arms<img src="https://makerworld.bblmw.com/makerworld/draft/534930/2024-01-31_e59fd6af93ff3.jpeg"> Step 2:Fit the small assembly into on of the holes in the big compartment<img src="https://makerworld.bblmw.com/makerworld/draft/534930/2024-01-31_02bff2690b4a3.jpeg"> Step 3:Put one of the big end caps on to the filament<img src="https://makerworld.bblmw.com/makerworld/draft/534930/2024-01-31_ebf62619ace29.jpeg"> Step 4:Cut off the excess material<img src="https://makerworld.bblmw.com/makerworld/draft/534930/2024-01-31_06634bde55d66.jpeg"> Step 5:Add a dab of super glue<img src="https://makerworld.bblmw.com/makerworld/draft/534930/2024-01-31_743dab3351607.jpeg"> Do this 24 times and the toolbox is ready for use :)

Bambu Lab - ToolBox

这是一个自制模型，该模型不包含竿稍，竿稍建议另配专用竿稍。

配件

机器人

BOx

toys