Heinzelmaennchen Werkstatt

Marc Elbichon

Update 2023-12-14: <ul><li>Fixed the 6.0mm Stubby Handle (stl and 3mf)</li></ul>&nbsp;Remix of the excellent work from OlleMark with some improvements :<ul><li>Multicolor writing on cap and keylock instead of extruded text</li><li>Merge handles and caps to print them together</li></ul>‘Carousel’ stand is available here : <a target="_blank" href="https://makerworld.com/en/models/66500" rel="nofollow noopener">https://makerworld.com/en/models/66500</a>&nbsp;Thanks a lot for original design!

(Metric) Stubby Allen Key Handles (multicolor, print in place)

Werkstatt

Minools

DISCLAIMER: Install at your own risk! I am not responsible for any damages to your 3D printer caused by the installation of this model.&nbsp;This model is a simple hygrometer holder, designed to be installed using the pre-existing door handle screws for the P1S door. It will probably work for the X1C too assuming the doors are the same… I've printed it using ABS here given temps in the chamber can get quite high. Supports are used and can be easily removed by pushing it out from the top.&nbsp;It is a very tight fit (41.2mm internal diameter) to ensure the vibrations of the printer will not dislodge the hygrometer during a print. Once installed it is designed to avoid contact with any internal components of the printer, such as the bed. As seen in the uploaded image, there is ample clearance between the holder and the Bambulab PEI plate.&nbsp;&nbsp;&nbsp;

Werkstatt

Printer Upgrade