Brittanysteers_RC

HenryNeal

This can hold a couple of your necklaces plus some rings or hair ties on the top. I used some scotch double-sided mounting strips to keep it up and it is really working and holds a good amount of weight if you have heftier necklaces. Command strips would probably work too and are more renter-friendly. I used regular pla and it's been working perfectly.

Necklace, Ring, and other Jewelry Holder

Applejax_Industries

Introducing Roadbites, the modular food station for your vehicle. We went through several revisions and test prints to get this first version as best as it could be. We of course know this may not work for every vehicle out there, but in time we will have different version adaptations to fit more vehicles. This was completed designed and tested using ASA filament, so not sure how fitment may be with other filament types. We look forward seeing how this works for others and different color variations that will be used.&nbsp;There are additional parts needed which are listed in the video, but it would not allow me to type in the parts myself in the non 3d printed parts section.&nbsp;The full assembly video is in the link below and if you really like it, please boost for us!&nbsp;<figure class="media"><div data-oembed-url="https://vimeo.com/941420370?share=copy"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://player.vimeo.com/video/941420370" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allowfullscreen=""></iframe></div></div></figure>

RoadBites Modular Food Station

car parts 

TeamK

This is for the r/c rock crawlers…I'm sharing the rear crossmember I use on my Gspeed V3 chassis builds. It will space the rails 2.75" (69.85mm) apart. Designed to use 3mm screws to bolt to the rails. Mount with the flat area up so that the recessed bottom gives clearance for your rear upper links if needed.&nbsp;The vertical hole in the center is designed to thread a 4mm screw. I typically use a 4mm grub screw as a body post on bodies with drop beds (see pic). It could also be used to bolt a different body post on for other setups.&nbsp;PLA+ or tough PLA seems to work well, though regular PLA works if you're not bashing hard with the truck. I use 5 or 6 perimeters, 5 or 6 top/bottom layers, and a fairly dense infill.&nbsp;This crossmember will also work on the Gspeed V1C1 chassis rails, though it's not ideal (I do use it on mine). Due to the shock towers bolting on you'll likely end up using one end hole and one middle hole on each side.

Rear Crossmember for Gspeed V3 Chassis

rc parts

Spar-Fuchs24.de

Deutsch:&nbsp;Deutsch:Das ist ein Remix des A1 Mini AMS Risers.In meinem Profil findest du auch die längere Variante in einem Stück.&nbsp;Diese Variante hier ist 10mm kürzer und somit druckbar auf dem A1 Mini.Falls du die 10mm längere Variante möchtest, check mein Profil.&nbsp;Da ich das ganze etwas stabiler wollte (es wackelt doch sehr arg) habe ich mich ans CAD gesetzt und das Verbindungsloch entfernt und die zwei Teile zusammengefügt, somit hat man mehr Stabilität und es wackelt auch nichts mehr!&nbsp;Check das Video: <a target="_blank" href="https://www.tiktok.com/@sparfuchs24.de/video/7315808799367990560" rel="nofollow noopener">HERE</a>&nbsp;English:&nbsp;This is a remix of the A1 Mini AMS Riser.In my profile you can also find the longer version in one piece.&nbsp;This version here is 10mm shorter and therefore printable on the A1 Mini.If you want the 10mm longer version, check my profile.&nbsp;Since I wanted the whole thing to be a bit more stable (it wobbles a lot), I sat down at the CAD and removed the connecting hole and joined the two parts together, so you have more stability and nothing wobbles anymore!&nbsp;Check the Video: <a target="_blank" href="https://www.tiktok.com/@sparfuchs24.de/video/7315808799367990560" rel="nofollow noopener">HERE</a>

ava

car parts

rc parts

printer parts