Great design!

Great model! Tolerances on the nut are WAY to tight.. Even my H2D had some concerns. I ended up printing the "Easier Fit Nut", and while it did fit, I needed to use an actual wrench to tighten it, and I had to become mentally committed to watching it snap it my hand while I tightened it... However, it did thread without breaking. Overall looks great, printed PLA, we'll see how it holds up!

Perfect fit, now my cats will finally leave it alone!

Not the strongest print, or cleanest threads but it's functional, and my kids love it.

This was such a FUN, and easy light box to print! I've never printed a lightbox before, but I saw this sign and knew my buddy would love it. So off I went down this rabbit hole, and I couldn't be happier with the results. I printed this at 120%, and printed the base with it, obviously.. lol. The only modification I made to the original design is I drilled a hole through the back plate of the base in order to allow me to utilize one strand of LEDS, without splicing anything. I was able to feed the LEDS through the provided access holes, however, I'm not sure I could of done it without scaling, it was a tight fit at 120%.. Here's a link to the LEDS I used (Bright White) -- https://a.co/d/iTYUYxY Great design, thank you for sharing!!

Daughter is ecstatic! Linked fan worked great, easy print! Just need some glue to snug everything together, and we're good to go!

Would not recommend printing in PLA.. 🤡 Printed on my H2D and the tolerances are very TIGHT. However, theres a 'hair' of wiggle towards the camera and made the phone a little wiggle right there when applying pressure like being on the phone. I found it annoying, but he said he recommended TPU 🤣. Biggest issue is my male, 30 yr old thumbs cannot hit the lock or volume button for the life of me without using both hands, should refine the edges there. Really nice work otherwise!

Great little print for the kiddos!!

Nice smooth print and profile!

Fantastic print and profile!