Bostra

mikolaj.mazik

I&#39;m a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;I want to present you Sd. Kfz. 234 Puma in 1:35 scale, Tracks are fully movable but wheels are solid due to the strengh issues. If you have an idea for specific vehicle or camuflage, feel free to write to me!&nbsp;

Sd Kfz 234 Puma 1:35 fully 3D printed armored Car 

Tanky 

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

Hexagon 

evax design

Ide o obraz na stenu alebo dekoráciu na stôl ktorý aj svieti a je vhodný ako vianočný darček. Je to niečo, čo si môže užiť každý! Na dokončenie a svietenie obrazu / dekorácie budete potrebovať elektrické osvetlenie na baterky. Pred vytlačením, si pozrite pokyny pre tlač.Pokyny pre tlačVianočný obraz je vytlačený z viac časti. Rozmer je 13cm a výška 5,4cm. Orientácia pri tlači by mala byť uložená na podložku plochou stranou. Je navrhnutý pre tlač bez podpôr. Vianočný obraz je tlačený výškou vrstvy 0,2 a 0,4 tryskou so 100% priamočiarou výplňou a 1 perimetre. Na obrázku som použila vanilla white filament . Vianočný obraz je potrebne zloziť. Všetky časti sú označene číslom a medzi každú častou je potrebne vložiť krúžok, ktorý je potrebne tlačiť 13 ks. Model je možné proporčne zmenšiť alebo zväčšiť!Ak máte nejaké problémy alebo návrhy tak mi zanechajte komentár a dajte mi vedieť. Ak sa vám moje modely páčia, nezabudnite ma podporiť pri ďalších výtvoroch!

Vianočný obraz

Vánoce 

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #17 (1.44mm) swap to Ice Blue At layer #23 (1.92mm) swap to Jade White for the rest. &nbsp;

Venom HueForge

TripleGWorkshop

Prints face-down and fits most drains. Scale up/down as needed. Print in Petg or ASA for temperature resistance.

Scalable Drain Screen

Koupelna

acevalsl

Support for the death star adapted to the kit - 001&nbsp;<a target="_blank" href="https://makerworld.com/en/models/82213#profileId-87606" rel="nofollow noopener">https://makerworld.com/en/models/82213#profileId-87606</a>&nbsp;Puedes comprar el kit-001 en Bambu Lab o en Ali express&nbsp;<a target="_blank" href="https://es.aliexpress.com/item/1005005368235042.html?spm=a2g0o.order_list.order_list_main.5.74ff194d0HmMXU&gatewayAdapt=glo2esp" rel="nofollow noopener">https://es.aliexpress.com/item/1005005368235042.html?spm=a2g0o.order_list.order_list_main.5.74ff194d0HmMXU&gatewayAdapt=glo2esp</a>&nbsp;<a target="_blank" href="https://eu.store.bambulab.com/en-es/products/led-lamp-kit-001" rel="nofollow noopener">https://eu.store.bambulab.com/en-es/products/led-lamp-kit-001</a>&nbsp;&nbsp;Modification of the support to be able to hold the cable and avoid breakage. Adjustment of the support on the death star to avoid using glue or any other type of extras. Increased the lower hole so that the cable comes out without problems

DeathStar Lamp kit adapter

Osvětlení 

Because of the poor rear visibility through the rearview mirrors, I made this model. This increase of 2 cm is sufficient for better visibility.Layer Height: 0.2Perimeters: 4Full layers: Top 5 Bottom 5Fill density: 15%Fill Pattern: GyroidSupports: Only on printing matFilament: I used ASA275, but it could be PETGThe right and left stl files are identical in size and two are only for the orientation of the CFMOTO inscription.During assembly, it is necessary to use screws 2 cm longer!

Mirror pad - CFMOTO GT650

Moto

The Big Greek

&nbsp;Organiser with Gadget&nbsp;19.01.2024 UPDATE Stones Inlays as Print Profile20.01.2024 UPDATE A small gadget for the organiser - Notes Holder20.01.2024 UPDAT No.2 If you are looking for a suitable stand-alone notes dispenser you can find it here <a target="_blank" href="https://makerworld.com/en/models/148958#profileId-162549" rel="nofollow noopener">https://makerworld.com/en/models/148958#profileId-162549</a>  I would like to introduce you to another office helper with a little gadget.&nbsp;I think it is timeless and fits well on a desk.&nbsp;Apart from the fact that pens, scissors, ruler, paper and small items fit in it, you can also put a telephone with a case in it.&nbsp;As a gadget you can use a small box or a hydrometer which is inserted in the centre.&nbsp;There are also USB, SDCard and Micro SDCard holders.&nbsp;Of course, you can change the colours yourself.&nbsp;If that's not enough, you can find the AT Sign Phone and Tablet Holder here <a target="_blank" href="https://makerworld.com/en/models/139391#profileId-151926" rel="nofollow noopener">https://makerworld.com/en/models/139391#profileId-151926</a>&nbsp;or a ARGB-Organizer here <a target="_blank" href="https://makerworld.com/en/models/146664#profileId-159912" rel="nofollow noopener">https://makerworld.com/en/models/146664#profileId-159912</a>&nbsp;Have fun printing and leave a like or download the profile.&nbsp;No supports required.If you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or By me a Coffee</a></li></ul>TBG&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-15_1b1f90752652c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-15_9841f441828ce.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-15_a39f7e01f5231.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-15_217669e7e6b5d.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-15_8213d7ff74a64.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-15_5cdfd3e48f661.png"></figure>Added A small gadget for the organiser - Notes Holder&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-20_58ee2797cf47f.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-20_26af91a00920a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-20_7443be14046e2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464537/2024-01-20_5fc35ee6dda25.jpg"></figure>

Organizer with Gadget

Kancelář 

WS Design & Engineering

<h3>Bambu Lab - Faster Start - reduce waiting time | G-code trick</h3>Bambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the 'wait for bed temp' to a later position since this is an unnecessary delay. Meanwhile the printer can continue with preparations and you safe time on print-duration.<h4>To-Do:</h4>Go into BambuStudio or OrcaSlicer and search for your printer (should work an all Bambu printers) - click the 'little icon' next to the printer (1) - In the printer settings, click on 'Machine G-code' tab (2) - In the 'Machine start G-code' section (3), scroll down and look for the lines&nbsp;;===== heatbed preheat ==================== M1002 gcode_claim_action : 2 M140 S[bed_temperature_initial_layer_single] ;set bed temp M190 S[bed_temperature_initial_layer_single] ;wait for bed temp&nbsp;- Now cut-out (ctrl+x) the following line&nbsp;M190 S[bed_temperature_initial_layer_single] ;wait for bed temp&nbsp;- and paste it right befor the section of the bed leveling&nbsp;M190 S[bed_temperature_initial_layer_single] ;wait for bed temp ;===== bed leveling ==================================&nbsp;- now safe your 'new' printer profile (use a different end naming or such) and select it as your 'printer' in the dropdown menu.<h4> Notes:</h4>- If you do more small single objects, the gained print time saving is great. - Bambu may change the printer profiles in the future, make sure you always check if they added this feature (maybe?!) - I recommend after a firmware/software/profile upgrade to do this steps again - so you make sure to benefit from the latest versions and dont mess up things&nbsp;AS WITH ANY CUSTOM G-CODE, PLEASE REVIEW BEFORE USING, AND USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR PRINTER.&nbsp;&nbsp;If you wanna get less poop on multicolor-prints, check this out: https://makerworld.com/en/models/91241

Bambu Lab - Faster Start - reduce waiting time | G-code trick

Bambulab příslušenství 

mcginnis83

Remixed version of the Terminator skull

Terminator Pencil Holder

Bust

3DMON maker

I like MihaiDesigns' idea and the P1P Armor Modplate. This is a remix of Bambu Lab AMS Stacking Stand with Armor Modplate style.All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet.&nbsp;Updated on Jan. 7th, 2004- The wall extension(Riser) is 20mm taller than the previous one, so the lower AMS top lid can fully open without the need to hold it.- Also, you can add one more bracing when you use the wall extension for more rigidity.&nbsp;Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended.* If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2.* All pins are redesigned for better strength. Thanks for the great idea! <a target="_blank" href="https://www.printables.com/@djwhouse" rel="nofollow noopener">@djwhouse</a> Now, pins can be printed horizontally.<ul><li>Pin1 v2(13mm) & Lock : for assembling bracing parts.</li><li>Pin2 v2(40mm) : for adding side wall extensions.</li><li>*Pin3 v2(20mm) : for joining bracing assembly and side walls.</li><li>*Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side walls.</li></ul>&nbsp;If you need a build plate holder version, please check the link below.<a target="_blank" href="https://makerworld.com/en/models/62232#profileId-64745" rel="nofollow noopener">https://makerworld.com/en/models/62232#profileId-64745</a>&nbsp;

AMS Stacking Stand Remix

JDJDJD

<h3>Meet the ProClip!</h3>The ProClip Filament Clip is a pleasure to use and easy to print.&nbsp;ProClip has a built-in handle that works in coordination with a clamping tunnel to manage and secure your filament.<h3>NEW! ProClip V2 features:</h3><ul><li>A extra durable clamp inside the tunnel.</li><li>Symmetrical input holes work for right handed and left handed users.</li><li>Handle flange provides good control and a comfortable grip.</li><li>A Low Profile option designed for tight storage containers.</li></ul>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000030298/design/2023-09-30_0e45d041d5e2.gif"></figure>&nbsp;<h3>BENEFITS:</h3><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Designed for FDM Printing</li><li>Free to Download!</li></ul><h3> </h3><h3>UPDATES:</h3><ul><li>10/06/23 ProClip V2 Released</li></ul>&nbsp;<h3>TIPS:</h3><ul><li>MUST be printed on side</li><li>Printer tolerances vary. If your ProClip is running tight just slide a piece of filament back and forth to break it in a little bit.</li><li>Glue stick can help condition the print bed for proper adhesion/release and is recommended.</li></ul>&nbsp;<h3>NOTES:</h3><ul><li>ProClip can be used commercially, but can’t be resold.</li></ul>&nbsp;<h3>TESTED PRINT DETAILS:</h3>ProClip has been built around the following conditions.<ul><li>Glue Stick: Yes (without is at your own risk)</li><li>Support: Disabled</li><li>Walls: 2</li><li>Brims: No</li><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Infill: 15% Gyriod</li></ul>

ProClip Filament Clip

Drobnosti 

gizmo.3d

<h2>Suspended Hand in coloured </h2>:)&nbsp;

Suspended Hand

zajímavé 

Anthony_323

This is a 2D model for decoration, I've included a 3mf and stl's in the zip. Don't forget to place it face down on your build plate for better results.

GhostBusters Logo 

Blbustky

jwalker55

Vase with a wavy pattern.&nbsp;Included is a filled version for printing in vase mode and a regular version with the inner cavity modeled for regular printing.

Wavy Vase

vázy 

creolet.marco.markl

Everyone is familiar with the various types of cable grommets for furniture panels. With Conduito, you now have the option to use a version specially optimized for 3D printing. By carefully studying existing models, I developed a variant tailored for 3D printing. This design allows you to produce a cable grommet directly with your own 3D printer.&nbsp;Conduito is available for a variety of hole diameters, from 1 3/8 inches to 4 3/4 inches, including common sizes like 1-3/4, 2, 2-1/2, 3-1/8, 3-3/4, and 4 inches, as used by Forstner drills, for example. Calculating the diameter of the cable grommet is straightforward: hole diameter minus 0.39 inches. The panel thickness should be at least 0.59 inches.&nbsp;Complete information about this project, including links to both free and licensed versions, is available on its dedicated page in my Wiki. If you like my work, please hit "Like" and don't forget to follow my profile.&nbsp;Wiki (English): <a target="_blank" href="https://wiki.creolet.com/en/projects/conduito-cable-grommet" rel="nofollow noopener">https://wiki.creolet.com/en/projects/conduito-cable-grommet</a>&nbsp;Wiki (German): <a target="_blank" href="https://wiki.creolet.com/projects/conduito-cable-grommet" rel="nofollow noopener">https://wiki.creolet.com/projects/conduito-cable-grommet</a>&nbsp;Collection of all metric (mm) sizes: <a target="_blank" href="https://makerworld.com/en/u/1762145450/collections/67250" rel="nofollow noopener">https://makerworld.com/en/u/1762145450/collections/67250</a>&nbsp;Collection of all imperial (inch) sizes: <a target="_blank" href="https://makerworld.com/en/u/1762145450/collections/67249" rel="nofollow noopener">https://makerworld.com/en/u/1762145450/collections/67249</a>--- Drill hole diameter: 2 inch--- The print settings provided here are designed for a 0.4 mm nozzle and a layer height of 0.2 mm. The settings can be easily found in most common slicing programs like Cura, PrusaSlicer, or BambuStudio/OrcaSlicer.&nbsp;* Slicer Unit: Metric / mm * Wall generator: preferably Arachne * Walls: 3 * Top layers: 5 * Bottom layers: 5 * Infill density: from 20% * Infill pattern: Any

Conduito - 2" Cable Grommet

Dílna 

Smart3d by Gabriel Gomes

fallout logo sign

Nápisy 

MrUnlustig

Origanilay made by: vwfan0178Link: https://www.thingiverse.com/thing:4774688

Universal Drawer Organizers (IKEA ALEX)

Ikea 

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!