user_3961406923

The Crafty Maker

Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window. Their translucent filament is a perfect fit for this.&nbsp;I was pleasantly surprised that they agreed and liked the project idea, so they sent me a batch of translucent PETG filament to get things started. &nbsp;There were a lot of ideas to choose from, but the space shuttle stuck with me, since I'm a big space nerd, so that was an obvious choice for me.&nbsp;Designing it was quite challenging because the color of the translucent filament varies on the thickness of the part. It took quite some test printing to get the best color and transparency, but eventually I was able to find the right balance and finished up the model.&nbsp;The filaments I've used are all Bambu Lab filaments. The parts that resemble the stained glass are printed in Translucent PETG Light Blue, Orange, Brown and Grey. Only the white parts are printed in a PETG that's not part of the translucent filament line. Those are printed in Basic PETG Transparent.&nbsp;The front and back frame are both printed in Basic PETG Black. All the other parts are all printed in Basic PLA. The box, lid and led panel or led strip holder are printed in the color black, the diffuser is printed in the color white.&nbsp;The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.&nbsp;Print Settings&nbsp;Stained glass pieces<ul><li>100% infill</li><li>Top surface pattern: Octogram Spiral</li></ul>Front & Back Frame<ul><li>Arachne wall generator or detect thin walls</li></ul>Backlight Led Panel Holder<ul><li>Regular support on build plate only</li></ul>Backlight Led Strip Holder<ul><li>Outer brim recommended</li></ul>Diffuser<ul><li>100% infill</li><li>Outer brim recommended</li></ul>Box & Lid<ul><li>Outer wall speed 90 for consistent surface finish</li><li>Seam position: Back</li></ul>&nbsp;For the light source I've used following Bambu Lab products&nbsp;EU Store<ul><li><a target="_blank" href="https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a> </li></ul>US Store<ul><li><a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Space Shuttle Stained Glass Lightbox

Bones, Sculptures + Nerd stuff

IXPatch

This is a flexible, articulated Charmeleon. It can stand on its feet and has a flexible tail.&nbsp;It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Charmeleon - Flexi Articulated Pokémon

Toys

JS DESIGN

Presenting my Labyrinth marble Design. The labyrinth path is passing thru the different levels here and there. The center portion is part of the labyrinth but is fully hidden.&nbsp;It uses the same marbles as my Pinball fidget here: <a target="_blank" href="https://makerworld.com/en/models/404867#profileId-306640" rel="nofollow noopener">Pinball fidget - Print in place! by JS DESIGN - MakerWorld</a>&nbsp;Enjoy!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/816022/2024-04-04_e2dd3b1eb331c.png">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/816022/2024-04-04_b94dd35505b01.png">&nbsp;

Marble Labyrinth 3 levels - Print in place!

Presents

DonMatis

Customize your Halloween wall clocks! Pick your preferred front and back themes, and decide if you'd like unique minute/hour pointers to create your personalized timepiece.&nbsp;Need an additional clock mechanism, i've used <a target="_blank" href="https://www.amazon.co.uk/dp/B08B8X1FN5?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">this one from Amazon</a>&nbsp;<h3>Print Instructions</h3>For a hassle-free print, use my available profiles. One has the clock's back piece and hour/minute pointers, while the other offers three front hueforge themes. Simply download and select what you'd like to print.<h4>Back Piece</h4>You can choose between two, one with regular numbers and the second with Halloween symbols.Both pieces require, 0.20mm profile with arachne mode for the numbers and optionally ironing on the top surfaces&nbsp;Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Orange </li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #26 (5.20mm) swap to Orange</li></ul><h4>Hour/Minute Pointers</h4>These are designed to work with the specific clock mechanism i used. It might not work for you but it is a quick and easy print to test them out. Just use Classic on the slicer with 0.20mm.&nbsp;<h4>Front Themes (Hueforge)</h4>Here there are 3 different themes that you can choose from. Each one has different layer changes. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Theme 1<figure class="image image_resized image-style-side" style="width:27.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_4ac20afa3d39b.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #10 (0.88mm) swap to Blue Gray</li><li>At layer #14 (1.2mm) swap to Orange</li><li>At layer #24 (2mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 2<figure class="image image_resized image-style-side" style="width:26.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_8c77c280b0ff2.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #12 (1.04mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 3<figure class="image image_resized image-style-side" style="width:26.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_ad333fd492355.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #11 (0.96mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;<blockquote>Enjoy my work? Support me by joining my club on printables.com. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>

Bones, Sculptures + Nerd stuff

Toys

Presents

HueForge