Bobby C

Habitaritus

This is my new version of my favourite name tags for Christmas presents or wherever you need Christmas gift tags :) You can of course paint the colours however you like. There is a screenshot with the size of the font, font type etc. included.Have fun labelling your presents!Have a look at my other models and don't forget to rate them :)&nbsp;UPDATE: Added a stand. Now you can also use the pendant as a table decoration. For example, as place cards at your Christmas dinner.

Christmas Gift Tag with custom Names

christmas

FinEngineer

Dual part cooling fan mod for Elegoo Neptune 2.Deleted the ugly and noise inducing grid in front of hot end fan.This is actually remix of @terrorhai remix (https://www.printables.com/model/392704-v21-printhead-for-elegoo-neptune-22s), but decided to put it here for easier finding. This mod improved overhang performance clearly, compared to one fan Satsana setup.&nbsp;

Elegoo Neptune 2 dual 4010 blower fan mod remix

elegoo

GuyDa

9mm bullet

snap caps

A2S dESING

Car headrest clamp for Nintendo Switch holder.Do your companions in the back seats of the car want to play a game with the Nintendo Switch?Now it&#39;s possible thanks to this practical headrest clamp mount.Its width adjustment makes it universal. It adapts to all types of headrests. It also has tilt adjustment.

Nintendo in the car

limepod

I wasn&#39;t satisfied with the classic “Yet Another Infinity Cube” or any of the other similar models, so I made my own. This one has hinges based on YAFICv2, but with more forgiving tolerances and cutouts to prevent the top hinges from sticking.&nbsp;Recommended print settings:Split to parts, select each of the hinges, and give them extra walls and infill for strength.&nbsp;Update b6.0:Several iterations and tweaked tolerances later, this version should both turn better and print more easily.&nbsp;Changing the layer height or the first layer height can change how the bottom of the upper horizontal hinge prints. Best results seem to be as pictured, with 0.2mm for all layers.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448441/design/2024-04-30_d2c68ba98fdf08.png">&nbsp;The slicer will warn you that there are floating regions, that&#39;s fine:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448441/design/2024-04-29_2d6b6ae8a8cfd8.png">The sections of the hinges that touch the bed are small, take care they don&#39;t detach: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448441/design/2024-04-29_33efd07df0dc48.png">

Infinity Cube - angled hinges

fidgets

toolmantim313

4 Color infinity cube with rotating stand. The stand uses a standard 608 bearing. I printed the stand with a tri color silk filament to each side is a different color. It looks wild.

Infinity Cube / Machinist Cube

farmers market

Michele MM3D

hole in the wall hueforged&nbsp;Here you can find all my HueForge creations, <a target="_blank" href="https://makerworld.com/en/@MicheleMM3D/collections/503504" rel="nofollow noopener">https://makerworld.com/en/@MicheleMM3D/collections/503504</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Beige At layer #14 (1.2mm) swap to Jade White At layer #24 (2mm) swap to Yellow for the rest.

hole in the wall hueforge

hueforge

kbes1985

Hydrometer mounting plate for P1S / X1C door.&nbsp;This model is design for round hydrometer with a inner diameter from 42mm and a outer diameter from 46mm.

Hydrometer Mount for P1S / X1C Door

make3dtc

Shadowbox Paris Single layer to plug in Version 2 Update: In version 2 there are no longer 12 layers but only 6 the individual layers have been put together so that there are only 6 layers. This shadow box consists of 6 individual layers which are inserted into the shadow box one after the other.Finally, the back part is clicked into the shadow box with light force so that it snaps into place.The layers can be created according to your wishes and colors the pictures only serve as an example.&nbsp;In total, the shadow box consists of the following 8 parts:First layer frontSecond layerThird layerFourth layerFifth layerSixth layerBack partFrame&nbsp;&nbsp;&nbsp;Schattenbox Paris Einzelene Layer zum Stecken Version 2 Update: In der Version 2 sind es keine 12 Layer mehr sondern nur noch 6 die Einzelnen Layer wurden zusammen gefügt das es nur 6 Layer werden. Diese Schattenbox besteht aus 6 Einzelenen Layern diese nach einnander in die Schattenbox eingefügt werden.Zum Schluß kommt das Rückteil dran dieses wird mit Leichterkraft in die Schattenbox geklickt das diese dort einrastet.Die Layer können nach ihren Wünsche und Farben erstellt werden auf den Bilder dient es nur als Beispiel.&nbsp;Ingesamt besteht die Schattenbox aus den Folgenden 8 Teilen:Erste Layer VornZweite LayerDritter LayerVierter LayerFünfter LayerSechster LayerRückenteilRahmen

Shadowbox Paris Single Layer to plug in Version 2

TRIN

MiniWorld3D

<h3>🇨🇳 欢迎来到中国 Welcome to China!</h3>The Great Wall of China was built to protect the Empire from invasions for many centuries. It is not only an icon of Chinese history and culture, it is also our representative of Asia in the Wanderlust Collection of MiniWorld3D!We made it with considerations for miniature printing, so it is easy to print and has great details even with regular sized nozzles and standard setups.The Great Wall known today is actually a series of ancient walls, built, connected and maintained over centuries. The earliest records of a wall date to the 7th century. The sections more popular nowadays and depicted in our model were built during the Ming dynasty (1368–1644) (from <a target="_blank" href="https://en.wikipedia.org/wiki/Great_Wall_of_China" rel="nofollow noopener">Wikipedia</a>).This model was created by MiniWorld3D founder & lead 3D artist <a target="_blank" href="https://www.printables.com/social/15573-dany-sanchez/about" rel="nofollow noopener">Dany Sánchez</a>.This publication includes:<ol><li> The original model from 2014</li><li> An updated version from 2022, improved with more details and eliminating overhangs</li></ol>MiniWorld3D is happy to bring this model to life as a homage to all the people of China. This model was created from scratch by hand and brain to ensure printability and to create a beautifully stylized version of your favorite landmarks. Please give credit, it's all about spreading culture! Consider joining our Printables Club or supporting us on Patreon!<a target="_blank" href="https://www.printables.com/@miniworld3d" rel="nofollow noopener">printables.com/@miniworld3d</a> <a target="_blank" href="https://www.patreon.com/MiniWorld3D" rel="nofollow noopener">patreon.com/MiniWorld3D</a>Find all our profiles, YouTube channel & social media on:<a target="_blank" href="https://linktr.ee/miniworld3d" rel="nofollow noopener">linktr.ee/miniworld3d</a>Join our 40K followers on IG!<a target="_blank" href="https://www.instagram.com/miniworld3d/" rel="nofollow noopener">instagram.com/miniworld3d</a>  MiniWorld3D is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world!  Photo credits: main print photo by @dasinnovations, others by MiniWorld3D. -----------<h4>Printing Tips Suggested parameters:</h4>For better details, print slow, such as 20mm/s for outer perimeters. Fine-tune retraction to avoid stringing. Perimeters: 2 Top layers: 3 Infill: as low as 5% for miniatures, 12% if scaled larger. Lightning pattern suggested. No supports needed, this has been optimized to eliminate all overhangs.&nbsp;Brim or raft not needed.

Great Wall of China

history

nyx_nk

Before starting to print the helmet, check if your head fits well printing the dimension test&nbsp;Helmet visor: <a target="_blank" href="https://www.amazon.it/gp/product/B078YYQVWN/ref=ox_sc_saved_image_10?smid=A3R2BN8GAL312Z&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B078YYQVWN/ref=ox_sc_saved_image_10?smid=A3R2BN8GAL312Z&psc=1</a>If you don't want to spend money for this item, you can print your own visor (in the profiles list), but the result could not be perfect. &nbsp;If you have some issues printing accessories (bottom ears could fall), you can print them separately. The profiles are available in the list.&nbsp;11/16/2023 UPDATE: Added a new 1:1 (100%) scale version sectioned into 4 parts to glue. The accessories have also been adapted to size.

Mandalorian Helmet v2 - SUPPORTLESS

star wars

Aerocreative

Second iteration of my Charger model from Helldivers 2

Charger V2 - Helldivers 2

helldivers 2

HG_Design

Stacking boxes.Boxes can be printed to the desired scale and make a perfect fit in any location.leave suggestions for improvement and new ideas to leave here.&nbsp;

Stacking box

business stuff

PupaePrint

MICRO SD card remix using adapter that we all have too many of as a lid

MICRO SD CARD CASE

home

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_zpk0zhn91zj7.png"></figure><h4>Dimensions (LxWxH)</h4>170 x 96 x 65mm (100% scale)<h4>Basic information</h4>After multiple requests, I've decided to revisit my previously uploaded Orca design, and articulate it. Unfortunately Mattes beat me to it, and has already uploaded an <a target="_blank" href="https://makerworld.com/en/models/186429#profileId-205262" rel="nofollow noopener">Orca model</a> himself, so definitely check it out as well. I've decided to release the design anyway, as it would be a pity to scrap it completely, especially considering all the work that has been invested into it. I believe that my implementation of this idea still has something to offer, and isn't just a blind “copy” of the already existent design. It's unfortunate, that we both had the same idea at the same time, but I think there is enough space for both of us. I just wanted to clarify that, as I don't want to look like a copycat, or the Edison of 3D modelling :)&nbsp;Now briefly about the design itself: The model has 8 movable parts: The body is split into 6 segments + 2 movable fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup. Good cooling is very important, as the dorsal fin is fairly thin, and sticks out. It's advised to print at least two instances of the model to give the fin enough time to cool down and solidify, especially if your machine has trouble with cooling, or if you're printing a significantly downscaled version.<h4>Files information</h4>I've included 3 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Singlecolor and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 2 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_cbwntm48bfb1.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_c7okytd6aceh.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_y881a3834u7b.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_2nc49uiutzxt.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.

Articulated Orca (singlecolor and multicolor)

kids

Wing-Art

Table Card Holder with plates for QR-Codes or any other Information! This elegant and practical card holder is ideal for displaying QR codes for Wi-Fi access, table numbers, or other information. The holder allows for double-sided use, so cards can be inserted and displayed from both sides. With dimensions of 67 mm width, 83 mm height, and 3 mm depth, the holder is compact yet offers enough space for easily readable cards. The design is simple and modern, making the holder stylish in various settings, whether in cafes, restaurants, or at events. A versatile and useful accessory for any business or event environment, or simply for guest Wi-Fi at home. Plate Dimensions: 67 x 83 x 3 (width, height, depth)  You can <a target="_blank" href="https://makerworld.com/de/models/73754#profileId-78286" rel="nofollow noopener">GENERATE YOUR WIFI QR-Code PLATE (by pierricke2) HERE</a>&nbsp;Just take a look at my other Household Tools here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/406101" rel="nofollow noopener">Kitchen Dispenser for Jars - Version 2 with Quicklock Mount</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkiin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/115132#profileId-123776" rel="nofollow noopener">Bottle-Can Dispenser</a></li></ul>

Table Card Holder with plates for QR-Codes

display

h3li0

<h2>organiser with grid pattern and removable separator</h2>created in fusion 360&nbsp;photos show printed in black matte pla and brick red petg-cf<ul><li>0.20mm layer height</li><li>10% adaptive cubic infill</li></ul>dimensions &gt; x: 200mm · y: 100mm · z: 110mm&nbsp;including two print profiles:<ul><li>two plates, for different colours / materials like seen on the photos</li><li>single plate, for same colour / material</li></ul>&nbsp;note &gt; the separator is a tight fit, with small tolerance, if your printer / filament struggle with smaller tolerances, reduce the scale of the separator in bambu studio by 0.5~1%&nbsp;<h3>commercial licence membership available on my <a target="_blank" href="https://patreon.com/h3li0" rel="nofollow noopener">patreon</a></h3><a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buy me a coffee</a>&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in home studio&nbsp;

organiser with grid

price stuff

IXPatch

This is a flexible, articulated Charmander. It can stand on its feet and has a flexible tail.&nbsp;It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Charmander - Flexi Articulated Pokémon

pokemon

Cinderwing3D

Hello everyone!  Today I want to present to you the first ever completely free Cinderwing3D Dragon - The Bamboo Dragon! Bambulab reached out to me asking if I wanted to make a dragon for them and seeing how I use their printers for prototyping.... it was an easy yes!As with all my designs this model is an easy print-in-place and requires no supports. All you need is a clean bed and you&#39;re off! I also have included two 3MF files for multicolor, as shown in the pictures!  Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. Please feel free to join our <a href="discord.gg/cinderwing3d" rel="nofollow">Discord</a> chat for help and discussions. Filaments used were Bambu Green PLA Basic, Bambu Red PLA Basic, and Gold Bambu Silk PLA! <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=3729583&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Feel free to use my affiliate link to grab some for yourself!</a> The Green Gradient filament <a target="_blank" href="https://amzn.to/3Htn19A" rel="nofollow noopener">can be found here!</a> The Green and Brown Gradient <a target="_blank" href="https://amzn.to/47N8EYF" rel="nofollow noopener">can be found here!</a> And the Tricolor<a target="_blank" href="https://amzn.to/3UfR3W3" rel="nofollow noopener"> is here!</a> ----- Hi, I&#39;m Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale.  The Digital files are never to be re-sold, shared, or given away!<h4>Commercial License and monthly bonus models: <a target="_blank" href="https://than.gs/u/1780858?plans=true&amp;affiliateCode=jazzyplz" rel="nofollow noopener">Thangs Memberships</a> <a target="_blank" href="https://www.myminifactory.com/users/Cinderwing3D?show=tribe" rel="nofollow noopener">Tribes</a> <a target="_blank" href="https://www.patreon.com/cinderwing3d" rel="nofollow noopener">Patreon</a></h4><h4>Please see our other public models here: Check us out on our socials! <a target="_blank" href="https://www.facebook.com/cinderwing3d" rel="nofollow noopener">Facebook</a> | <a target="_blank" href="https://twitter.com/cinderwing" rel="nofollow noopener">Twitter</a> | <a target="_blank" href="https://www.instagram.com/cinderwing3d/" rel="nofollow noopener">Instagram</a> |<a target="_blank" href="https://tiktok.com/@cinderwing3d" rel="nofollow noopener"> Tiktok</a></h4>

Bamboo Dragon Cinderwing3D X BambuLab

multicolor prints

figueiredoPrint

AMS Lite spool adapters for reels, various sizes.&nbsp;With these accessories it is easier to adapt a filament roll to the AMS LITE.&nbsp;Model: Ø75mm, Ø74.5mm, Ø74mm, Ø73.5mm, Ø73mm, Ø72.5mm, Ø72mm, Ø71.5mm,&nbsp;If you don't find the adapter size you need, you can always ask me to draw it and place it on the profile.