Blutlinie-12

cor3y

Love Heart Bowl

live

WagZPrintZ

Ho! Ho! Ho! but in a bearded hipster skull format! &nbsp;Print face down for best appearance. The included 3mf is setup for textured bed, face down, at 1mm thick. You may need to scale correctly for the x1? (those dang calibration lines might getcha!) REMEMBER if you scale it, keep it 1mm thick for best results! But if you run this on a P1, give my profile a run and see how it goes for ya. pictures attached are of the file once printed on mine and the screenshot rendering is the options you can change all the colors to if you have 2 ams units. &nbsp;Merry Christmas, ya filthy animals! &nbsp;&nbsp;

Hipster Santa Skull

x-mass

speedlimit31

Fun little decorative knife set. I made these to use command hooks on the back, and then stick on a window in front of my house. Or to stick them in the side of a pumpkin.

Halloween Decorative Knife Set

Halloween

fb-artwork

A miniature for tabletop players showing a human male Wizard.The miniature comes in 3 variations:&nbsp;- with round base (_rb)- with square base (_sb)- with hexagonal base (_hb)&nbsp;As the model needs support, I used “Tree slim”.&nbsp;Feel free to click the like button if you enjoy my miniatures.Support me and become part of the club on steady: <a target="_blank" href="https://steadyhq.com/fb-artwork" rel="nofollow noopener">https://steadyhq.com/fb-artwork</a>

Dnd Miniature Human male Wizard

statuen

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

Recaro Racing Seat Phone Holder

Krimskrams

OldSpice3d

Update 2 with Print profile : New version added called 1 layer: - 1 single layer for all colors, perfect for PEI or engineering plate - New box adapted to the 1-layer version with reinforced thickness to avoid too much flexibility of the back plate. - Also an addition of a 1-layer version that adapts to the original boxThis new 1-layer version features an insert that fits into the box, so there's no need for glue, but it can still be removed.&nbsp;Update: now middle back plate with hole, .3mf updated too :)&nbsp;Everything is already set up properly in .3MF&nbsp;I added some light cover for the back when light go through seams, it's in “dowload raw model files” button and select original_V1.zip&nbsp;But for people having issues with light through seams, i think black cover tapes could be better than pla printed parts&nbsp;Tell me in section comments what can i improve :) &nbsp;Enjoy!

Harley Davidson LED logo lamp

Moped

jsalonis

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Red Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Army Red At layer #27 (2.24mm) swap to Sapphire Blue At layer #33 (2.72mm) swap to White for the rest.

FOUR COLOR - HueForge multicolor Spiderman in a hoodie

David

Harald Geisler

<div><h1>Summary</h1><div>A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to take up the filament better here. At the inlet to the printer, I used a pointed knife to slightly widen the PTFE tube in the direction of the AMS to improve the inlet. The existing M3 screws need to be replaced with longer ones.<ul><li>PC4-M10 pneumatic connector, inner diameter: 4 mm</li><li>2x M3 6mm</li></ul>Translated with www.DeepL.com/Translator (free version)<hr>Ein Splitter wie hier schon vorgestellt, aber nicht mit Magneten, sondern mit M3 Schrauben an vorhandenen Gewinden befestigt. Es gibt ihn in zwei Ausführungen. Einmal flach und einmal einen Arm um 90° in Richtung Spule gedreht, um hier das Filament besser aufnehmen zu können. Am Einlass zum Drucker habe ich mit einem spitzen Messer den PTFE-Schlauch in Richtung AMS etwas geweitet, um den Einlass zu verbessern. Die vorhandenen M3 Schrauben müssen durch längere ersetzt werden.<ul><li>PC4-M10 Pneumatik Verbinder, Innendurchmesser: 4 mm</li><li>2x M3 6mm</li></ul></div></div>