0.2mm layer, 2 walls, 15% infill

A1, three bottles on one plate, Transparent PLA, with slightly reduced transparency only at the bottle bottom, balancing both effect and efficiency

1 bottle per plate, transparent PLA, printed layer by layer. Compatible with all devices. The transparency of the bottle's bottom part is slightly inferior.

A1 only, 1 plate 1 bottle, Transparent PLA, bottle body and cap printed individually. Optimal print quality

Fridge magnet version, uses three 6mm x 2mm magnets

0.4 nozzle

Monochrome. 0.08mm layer, 2 walls, 15% infill

0.08mm layer, 2 walls, 15% infill

Fridge magnet version, uses three 6mm x 2mm magnets

0.2mm layer, 2 walls, 5% infill

0.08mm layer, 2 walls, 15% infill

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

0.28mm layer, 2 walls, 15% infill