Skywalker

nyx_nk

I edited the original model to printthis helmet with the least amount of support. I added some bevels to eliminate overhangs and flattened the inside of the helmet so as to make a bridge that didn't require supports. The only support present is for the right ear. As shown in the photo, the orange parts need to be eliminated: the support at eye level could be a little difficult to remove, you could help yourself with a dremel.The accessories are in the other .3mf file and are made with sequential printing to drastically reduce the number of purges, so don't be scared if you print one component at a time. &nbsp;Before starting to print the helmet, check if your head fits well printing the dimension test&nbsp;Helmet visor: <a target="_blank" href="https://www.amazon.it/gp/product/B078YYQVWN/ref=ox_sc_saved_image_10?smid=A3R2BN8GAL312Z&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B078YYQVWN/ref=ox_sc_saved_image_10?smid=A3R2BN8GAL312Z&psc=1</a>If you don't want to spend money for this item, you can print your own visor (in the profiles list), but the result could not be perfect.

Boba Fett helmet SUPPORTLESS

helmets n stuffs

HunterABCZ

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;PLA BlackPLA Grey or SilverPLA White

Porsche GT3 RS hueforge

cars

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable dragon wand! I made this design for Makerworld dragon contest (3/5). I think it will be a great addition Ornaments and toy for kids for new Dragon year. </h3>&nbsp;<h3>Best wishes to you all! 新年快乐.</h3>&nbsp;This wand takes me a while to design and tests. It takes around 2h33m to print and cost right around 50g filaments.The retractable part is not super rigid, it's by design, I did not put a lot of parameter in there, consider this will most gives to kids to play. So rather it break than hurt somebody.&nbsp;<h2>Update:</h2><h3>v1.5 (1/13/24) - Fix internal parts geometeric issue. (tested) It only applys on P & X Series profile.</h3>Printing profile for P & X Series have found geometric issues on inner parts. Which only occurs when selecting P&X series printers, A1 and A1mini profile doesn't have this issue. Internal parts have been redo. Profile for a1 mini, A1 have remained as v1.4 since it is working correctly.&nbsp;&nbsp;<h2>Detail display:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_161fe41bfd6c.gif"></figure>&nbsp;&nbsp;<h3>My other wand design: </h3>Loong Wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-16_55943d4f3e579.jpg"></figure>&nbsp;Harry Potter Wand: <a target="_blank" href="https://makerworld.com/en/models/68778#profileId-72937" rel="nofollow noopener">https://makerworld.com/en/models/68778#profileId-72937</a> <figure class="image image_resized" style="width:69.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_db6b2ce5b060b.jpg"></figure>&nbsp;<h2>Instruction:</h2>I put very large size of brim on all my printing profile, with 0mm gap to ensure the printing success rate. Since this model is a bit challenge to print.You will required to do some post work of removing brim off. It should be very simple. I have increased gap on first layer from design, so it is tight tolerance, but not super tight.&nbsp;&nbsp;<h2>Materials:</h2>If you are printing with some high shrinkage rate filaments, like some of the silk filament. Due to the sinkage rate different. Your part might slide out or break very easily. So, use some good filaments.&nbsp;<h2>Design:</h2>Let's talk about a little bit of design. The retractable mechanism is very simple, the inner piece is interlocking with outter pieces.<figure class="image image_resized" style="width:24.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_651c54592313e.png"></figure>Style is more challenging<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_37b064643dfb6.png"></figure>Adding more details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_d16c3620c7aab.png"></figure><h2>Printing suggestions:</h2>This is a tall object with very small contact area on first layer. It is challenge to print. It will print without brims, but it fail very easily that way. If you are slicing the model yourself, make sure you add brims, and set brim gap to 0mm. Also increase the first layer thickness.Or, just use those profile that I put there. It all have been tested and confirm works.&nbsp;&nbsp;&nbsp;

helmets n stuffs

cars

bruh